Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015 (2015), Article ID 627852, 13 pages
http://dx.doi.org/10.1155/2015/627852
Research Article

Modal Parameters Estimation of Building Structures from Vibration Test Data Using Observability Measurement

1School of Architecture, Chonnam National University, Gwangju 500-757, Republic of Korea
2School of Architecture & Civil Engineering, Kyungpook National University, Daegu 702-701, Republic of Korea
3School of Architecture, Ajou University, Gyeonggi-do 443-749, Republic of Korea

Received 13 October 2014; Revised 21 January 2015; Accepted 26 January 2015

Academic Editor: Roger Serra

Copyright © 2015 Jae-Seung Hwang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Hao, T. C. Ang, and J. Shen, “Building vibration to traffic-induced ground motion,” Building and Environment, vol. 36, no. 3, pp. 321–336, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. B. M. New, “Ground vibration caused by construction works,” Tunnelling and Underground Space Technology incorporating Trenchless, vol. 5, no. 3, pp. 179–190, 1990. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Wu, H. Hao, Y. Lu, and S. Sun, “Numerical simulation of structural responses on a sand layer to blast induced ground excitations,” Computers & Structures, vol. 82, no. 9-10, pp. 799–814, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. R. W. Clough and P. Penzien, Dynamics of Structure, McGraw-Hill, New York, NY, USA, 1975.
  5. M. Paz and W. Leigh, Structural Dynamics: Theory and Computation, Kluwer Academic Publishers, Dordrecht, The Netherlands, 5th edition, 2004.
  6. J. Kim and H. Choi, “Displacement-based design of supplemental dampers for seismic retrofit of a framed structure,” Journal of Structural Engineering-ASCE, vol. 132, no. 6, pp. 873–883, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. H.-G. Park, T. Eom, and H. Lee, “Factored modal combination for evaluation of earthquake load profiles,” Journal of Structural Engineering, vol. 133, no. 7, pp. 956–968, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. E. Reinoso and E. Miranda, “Estimation of floor acceleration demands in high-rise buildings during earthquakes,” The Structural Design of Tall and Special Buildings, vol. 14, no. 2, pp. 107–130, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. J. M. Bracci, “Simplified seismic evaluation of structures using adaptive pushover analysis,” in Computational Methods, Seismic Protection, Hybrid Testing and Resilience in Earthquake Engineering, vol. 33 of Geotechnical, Geological and Earthquake Engineering, pp. 77–96, Springer International Publishing, Cham, Switzerland, 2015. View at Publisher · View at Google Scholar
  10. S.-D. Zhou, L. Liu, W. Yang, and Z.-S. Ma, “Operational modal identification of time-varying structures via a vector multistage recursive approach in hybrid time and frequency domain,” Shock and Vibration, vol. 2015, Article ID 397364, 13 pages, 2015. View at Publisher · View at Google Scholar
  11. J.-S. Hwang, H. Kim, and J. Kim, “Estimation of the modal mass of a structure with a tuned-mass damper using H-infinity optimal model reduction,” Engineering Structures, vol. 28, no. 1, pp. 34–42, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Kim, W. Kim, B.-Y. Kim, and J.-S. Hwang, “System identification of a building structure using wireless MEMS and PZT sensors,” Structural Engineering and Mechanics, vol. 30, no. 2, pp. 191–209, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Liu, A. Li, Y. Ding, and D. Zhao, “Study of the structural damage identification method based on multi-mode information fusion,” Structural Engineering and Mechanics, vol. 31, no. 3, pp. 333–347, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. J.-N. Juang, Applied System Identification, Prentice Hall, Englewood Cliffs, NJ, USA, 1994.
  15. L. Ljung, System Identification Toolbox User's Guide, Mathworks, Natick, Mass, USA, 2007.
  16. J. S. Bendat, Nonlinear System Analysis and Identification from Random Data, John Wiley & Sons, New York, NY, USA, 1990. View at MathSciNet
  17. F. J. Doyle III, R. K. Pearson, and B. A. Ogunnaike, Identification and Control Using Volterra Models, Springer, New York, NY, USA, 2002. View at Publisher · View at Google Scholar · View at MathSciNet
  18. S. S. Afshari, H. Nobahari, and S. A. H. Kordkheili, “Experimental parametric identification of a flexible beam using piezoelectric sensors and actuators,” Shock and Vibration, vol. 2014, Article ID 718140, 5 pages, 2014. View at Publisher · View at Google Scholar
  19. B.-H. Cho, J.-S. Jo, S.-J. Joo, and H. Kim, “Dynamic parameter identification of secondary mass dampers based on full-scale tests,” Computer-Aided Civil and Infrastructure Engineering, vol. 27, no. 3, pp. 218–230, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Kang, H. Kim, S. Choi, S. Jo, J.-S. Hwang, and E. Yu, “Performance evaluation of TMD under typhoon using system identification and inverse wind load estimation,” Computer-Aided Civil and Infrastructure Engineering, vol. 27, no. 6, pp. 455–473, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Kailath, Linear Systems, Prentice-Hall, Englewood Cliffs, NJ, USA, 1980. View at MathSciNet
  22. C.-T. Chen, Linear System Theory and Design, Oxford University Press, New York, NY, USA, 3rd edition, 1999.
  23. K. F. Alvin and K. C. Park, “Second-order structural identification procedure via state-space-based system identification,” AIAA Journal, vol. 32, no. 2, pp. 397–406, 1994. View at Publisher · View at Google Scholar
  24. Analog Devices, Data Sheet—ADXL103/ADXL203, 2014.