Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015 (2015), Article ID 708034, 14 pages
http://dx.doi.org/10.1155/2015/708034
Research Article

Comparative Study of Time-Frequency Decomposition Techniques for Fault Detection in Induction Motors Using Vibration Analysis during Startup Transient

1HSPdigital-CA Telematica, Procesamiento Digital de Señales, DICIS, Universidad de Guanajuato, Carretera Salamanca-Valle km 3.5+1.8, Palo Blanco, 36700 Salamanca, GTO, Mexico
2Department of Electrical Engineering, University of Valladolid (UVa), 47011 Valladolid, Spain
3HSPdigital-CA Mecatronica, Facultad de Ingenieria, Universidad Autonoma de Queretaro, Campus San Juan del Rio, Rio Moctezuma 249, 76807 San Juan del Río, QRO, Mexico

Received 15 April 2015; Revised 4 June 2015; Accepted 8 June 2015

Academic Editor: Francesco Franco

Copyright © 2015 Paulo Antonio Delgado-Arredondo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. US Energy Information Administration, Electricity Use by Machine Drives Varies Significantly by Manufacturing Industry, US Energy Information Administration, 2013, http://www.eia.gov/todayinenergy/detail.cfm?id=13431.
  2. M. E. H. Benbouzid, “A review of induction motors signature analysis as a medium for faults detection,” IEEE Transactions on Industrial Electronics, vol. 47, no. 5, pp. 984–993, 2000. View at Publisher · View at Google Scholar · View at Scopus
  3. W. T. Thomson and M. Fenger, “Current signature analysis to detect induction motor faults,” IEEE Industry Applications Magazine, vol. 7, no. 4, pp. 26–34, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. V. Ghorbanian and J. Faiz, “A survey on time and frequency characteristics of induction motors with broken rotor bars in line-start and inverter-fed modes,” Mechanical Systems and Signal Processing, vol. 54-55, pp. 427–456, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Garcia-Perez, R. D. J. Romero-Troncoso, E. Cabal-Yepez, and R. A. Osornio-Rios, “The application of high-resolution spectral analysis for identifying multiple combined faults in induction motors,” IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 2002–2010, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Bindu and V. V. Thomas, “Diagnoses of internal faults of three phase squirrel cage induction motor—a review,” in Proceedings of the International Conference on Advances in Energy Conversion Technologies, pp. 48–54, Manipal, India, January 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Miceli, Y. Gritli, A. di Tommaso, F. Filippetti, and C. Rossi, “Vibration signature analysis for monitoring rotor broken bar in double squirrel cage induction motors based on wavelet analysis,” COMPEL, vol. 33, no. 5, pp. 1625–1641, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. P. C. M. L. Filho, J. N. Brito, V. A. D. Silva, and R. Pederiva, “Detection of electrical faults in induction motors using vibration analysis,” Journal of Quality in Maintenance Engineering, vol. 19, no. 4, pp. 364–380, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Gandhi, T. Corrigan, and L. Parsa, “Recent advances in modeling and online detection of stator interturn faults in electrical motors,” IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 1564–1575, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Su, K. T. Chong, and R. Ravi Kumar, “Vibration signal analysis for electrical fault detection of induction machine using neural networks,” Neural Computing and Applications, vol. 20, no. 2, pp. 183–194, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Nandi, T. C. Ilamparithi, S. B. Lee, and D. Hyun, “Detection of eccentricity faults in induction machines based on nameplate parameters,” IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 1673–1683, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. E. Cabal-Yepez, A. G. Garcia-Ramirez, R. J. Romero-Troncoso, A. Garcia-Perez, and R. A. Osornio-Rios, “Reconfigurable monitoring system for time-frequency analysis on industrial equipment through STFT and DWT,” IEEE Transactions on Industrial Informatics, vol. 9, no. 2, pp. 760–771, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. P. S. Panigrahy, P. Konar, and P. Chattopadhyay, “Broken bar fault detection using fused DWT-FFT in FPGA platform,” in Proceedings of the International Conference on Power, Control and Embedded Systems (ICPCES '14), pp. 1–6, Allahabad, India, December 2014. View at Publisher · View at Google Scholar
  14. I. S. Lee, “Fault diagnosis of induction motors using discrete wavelet transform and artificial neural network,” in HCI International 2011—Posters' Extended Abstracts, pp. 510–514, Springer, Berlin, Germany, 2011. View at Google Scholar
  15. S. K. Ahamed, S. Karmakar, M. Mitra, and S. Sengupta, “Diagnosis of induction motor faults due to broken rotor bar and rotor mass unbalance through discrete wavelet transform of starting current at no-load,” Journal of Electrical Systems, vol. 6, no. 3, pp. 442–456, 2010. View at Google Scholar · View at Scopus
  16. A. Saghafinia, S. Kahourzade, A. Mahmoudi, W. P. Hew, and M. N. Uddin, “On line trained fuzzy logic and adaptive continuous wavelet transform based high precision fault detection of IM with broken rotor bars,” in Proceedings of the IEEE Industry Applications Society Annual Meeting (IAS '12), pp. 1–8, Las Vegas, Nev, USA, October 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Saghafinia, S. Kahourzade, A. Mahmoudi, W. P. Hew, and M. Nasir Uddin, “Broken rotor bar fault detection of 3-phase induction motor using online adaptive continuous wavelet transform and fuzzy logic,” International Review of Electrical Engineering, vol. 7, no. 3, pp. 4383–4394, 2012. View at Google Scholar · View at Scopus
  18. S. Das, C. Koley, P. Purkait, and S. Chakravorti, “Wavelet aided SVM classifier for stator inter-turn fault monitoring in induction motors,” in Proceedings of the IEEE Power and Energy Society General Meeting, pp. 1–6, Minneapolis, Minn, USA, July 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Pilloni, A. Pisano, M. Riera-Guasp, R. Puche-Panadero, and M. Pineda-Sanchez, “Fault detection in induction motors,” in AC Electric Motors Control: Advanced Design Techniques and Applications, F. Giri, Ed., pp. 275–309, John Wiley & Sons, Oxford, UK, 2013. View at Google Scholar
  20. J. A. Antonino-Daviu, M. Riera-Guasp, M. Pineda-Sanchez, and R. B. Pérez, “A critical comparison between DWT and Hilbert–Huang-based methods for the diagnosis of rotor bar failures in induction machines,” IEEE Transactions on Industry Applications, vol. 45, no. 5, pp. 1794–1803, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. K. Peng, P. W. Tse, and F. L. Chu, “A comparison study of improved Hilbert-Huang transform and wavelet transform: application to fault diagnosis for rolling bearing,” Mechanical Systems and Signal Processing, vol. 19, no. 5, pp. 974–988, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. V. Climente-Alarcon, J. A. Antonino-Daviu, M. Riera-Guasp, and M. Vlcek, “Induction motor diagnosis by advanced notch FIR filters and the wigner-ville distribution,” IEEE Transactions on Industrial Electronics, vol. 61, no. 8, pp. 4217–4227, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. S. S. Refaat, H. Abu-Rub, M. S. Saad, E. M. Aboul-Zahab, and A. Iqbal, “ANN-based for detection, diagnosis the bearing fault for three phase induction motors using current signal,” in Proceedings of the IEEE International Conference on Industrial Technology (ICIT '13), pp. 253–258, Cape Town, South Africa, February 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. V. Climente-Alarcon, J. A. Antonino-Daviu, M. Riera-Guasp, R. Puche-Panadero, and L. Escobar, “Application of the Wigner-Ville distribution for the detection of rotor asymmetries and eccentricity through high-order harmonics,” Electric Power Systems Research, vol. 91, pp. 28–36, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. V. Climente-Alarcon, J. A. Antonino-Daviu, M. Riera-Guasp et al., “Transient tracking of low and high-order eccentricity-related components in induction motors via TFD tools,” Mechanical Systems and Signal Processing, vol. 25, no. 2, pp. 667–679, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. V. Climente-Alarcón, J. A. Antonino-Daviu, R. Riera-Guasp et al., “Diagnosis of stator short-circuits through Wigner-Ville transient-based analysis,” in Proceedings of the 35th Annual Conference of the IEEE Industrial Electronics Society (IECON '09), pp. 1097–1102, Porto, Portugal, November 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Blödt, D. Bonacci, J. Regnier, M. Chabert, and J. Faucher, “On-line monitoring of mechanical faults in variable-speed induction motor drives using the Wigner distribution,” IEEE Transactions on Industrial Electronics, vol. 55, no. 2, pp. 522–533, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Rajagopalan, J. M. Aller, J. A. Restrepo, T. G. Habetler, and R. G. Harley, “Detection of rotor faults in brushless DC motors operating under nonstationary conditions,” IEEE Transactions on Industry Applications, vol. 42, no. 6, pp. 1464–1477, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. P. Zhang, Y. Du, T. G. Habetler, and B. Lu, “A survey of condition monitoring and protection methods for medium-voltage induction motors,” IEEE Transactions on Industry Applications, vol. 47, no. 1, pp. 34–46, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Garcia-Perez, R. J. Romero-Troncoso, E. Cabal-Yepez, R. A. Osornio-Rios, and J. A. Lucio-Martinez, “Application of high-resolution spectral analysis for identifying faults in induction motors by means of sound,” Journal of Vibration and Control, vol. 18, no. 11, pp. 1585–1594, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. C. Rodriguez-Donate, R. J. Romero-Troncoso, E. Cabal-Yepez, A. Garcia-Perez, and R. A. Osornio-Rios, “Wavelet-based general methodology for multiple fault detection on induction motors at the startup vibration transient,” Journal of Vibration and Control, vol. 17, no. 9, pp. 1299–1309, 2011. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Garcia-Perez, R. J. Romero-Troncoso, E. Cabal-Yepez, R. A. Osornio-Rios, J. D. J. Rangel-Magdaleno, and H. Miranda, “Startup current analysis of incipient broken rotor bar in induction motors using high-resolution spectral analysis,” in Proceedings of the IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics & Drives (SDEMPED ’11), pp. 657–663, Bologna, Italy, September 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Bellini, C. Concari, G. Franceschini, C. Tassoni, and A. Toscani, “Vibrations, currents and stray flux signals to asses induction motors rotor conditions,” in Proceedings of the 32nd Annual Conference on IEEE Industrial Electronics (IECON '06), pp. 4963–4968, IEEE, Paris, France, November 2006. View at Publisher · View at Google Scholar · View at Scopus
  34. V. Climente-Alarcon, J. A. Antonino-Daviu, F. Vedreño-Santos, and R. Puche-Panadero, “Vibration transient detection of broken rotor bars by PSH sidebands,” IEEE Transactions on Industry Applications, vol. 49, no. 6, pp. 2576–2582, 2013. View at Publisher · View at Google Scholar · View at Scopus
  35. W. R. Finley, M. M. Hodowanec, and W. G. Holter, “An analytical approach to solving motor vibration problems,” IEEE Transactions on Industry Applications, vol. 36, no. 5, pp. 1467–1480, 2000. View at Publisher · View at Google Scholar · View at Scopus
  36. M. Salah, K. Bacha, and A. Chaari, “Comparative investigation of diagnosis media for induction machine mechanical unbalance fault,” ISA Transactions, vol. 52, no. 6, pp. 888–899, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. H. Bloch, Machinery Failure Analysis and Troubleshooting, Gulf Publishing, Houston, Tex, USA, 3rd edition, 1999.
  38. P. D. McFadden and J. D. Smith, “The vibration produced by multiple point defects in a rolling element bearing,” Journal of Sound and Vibration, vol. 98, no. 2, pp. 263–273, 1985. View at Publisher · View at Google Scholar · View at Scopus
  39. Z. Kiral and H. Karagülle, “Simulation and analysis of vibration signals generated by rolling element bearing with defects,” Tribology International, vol. 36, no. 9, pp. 667–678, 2003. View at Publisher · View at Google Scholar · View at Scopus
  40. A. Sadoughi, M. Ebrahimi, and E. Rezaei, “A new approach for induction motor broken bar diagnosis by using vibration spectrum,” in Proceedings of the SICE-ICASE International Joint Conference, pp. 4715–4720, Busan, The Republic of Korea, October 2006. View at Publisher · View at Google Scholar · View at Scopus
  41. S.-H. Cho, G. Jang, and S.-H. Kwon, “Time-frequency analysis of power-quality disturbances via the Gabor-Wigner transform,” IEEE Transactions on Power Delivery, vol. 25, no. 1, pp. 494–499, 2010. View at Publisher · View at Google Scholar · View at Scopus
  42. P. L. Søndergaard, “Efficient algorithms for the discrete Gabor transform with a long FIR window,” Journal of Fourier Analysis and Applications, vol. 18, no. 3, pp. 456–470, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  43. M. J. Bastiaans and M. C. W. Geilen, “On the discrete Gabor transform and the discrete Zak transform,” Signal Processing, vol. 49, no. 3, pp. 151–166, 1996. View at Publisher · View at Google Scholar · View at Scopus
  44. F. Auger, P. Flandrin, P. Gonçalvès, and O. Lemoine, Time-Frequency Toolbox For Use with MATLAB, CNRS, Paris, France; Rice University, Houston, Tex, USA, 1996.
  45. S. Mallat, A Wavelet Tour of Signal Processing: The Sparse Way, Academic Press, 2009. View at MathSciNet