Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 915859, 18 pages
http://dx.doi.org/10.1155/2015/915859
Review Article

High Loaded Mounts for Vibration Control Using Magnetorheological Fluids: Review of Design Configuration

Smart Structures and Systems Laboratory, Department of Mechanical Engineering, Inha University, Incheon 402-751, Republic of Korea

Received 9 May 2015; Accepted 11 August 2015

Academic Editor: Chao Tao

Copyright © 2015 Xuan Phu Do and Seung-Bok Choi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Geisberger, A. Khajepour, and F. Golnaraghi, “Non-linear modelling of hydraulic mounts: theory and experiment,” Journal of Sound and Vibration, vol. 249, no. 2, pp. 371–397, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Marzbani, R. N. Jazar, and M. Fard, “Hydraulic engine mounts: a survey,” Journal of Vibration and Control, vol. 20, no. 10, pp. 1439–1463, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Yu, S. M. Peelamedu, N. G. Naganathan, and R. V. Dukkipati, “Automotive vehicle engine mounting systems: a survey,” Journal of Dynamic Systems, Measurement and Control, vol. 123, no. 2, pp. 186–194, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. M. F. Golnaraghi and G. N. Jazar, “Development and analysis of a simplified nonlinear model of a hydraulic engine mount,” Journal of Vibration and Control, vol. 7, no. 4, pp. 495–526, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. S. He and R. Singh, “Estimation of amplitude and frequency dependent parameters of hydraulic engine mount given limited dynamic stiffness measurements,” Noise Control Engineering Journal, vol. 53, no. 6, pp. 271–285, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. Q. Li, J.-C. Zhao, B. Zhao, and X.-S. Zhu, “Parameter optimization of a hydraulic engine mount based on a genetic neural network,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 223, no. 9, pp. 1109–1117, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. F. Hausberg, C. Scheiblegger, P. Pfeffer, M. Plöchl, S. Hecker, and M. Rupp, “Experimental and analytical study of secondary path variations in active engine mounts,” Journal of Sound and Vibration, vol. 340, pp. 22–38, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Elahinia, C. Ciocanel, T. M. Nguyen, and S. Wang, “MR- and ER-based semiactive engine mounts: a review,” Smart Materials Research, vol. 2013, Article ID 831017, 21 pages, 2013. View at Publisher · View at Google Scholar
  9. D. H. Wang, H. X. Ai, and W. H. Liao, “A magnetorheological valve with both annular and radial fluid flow resistance gaps,” Smart Materials and Structures, vol. 18, no. 11, Article ID 115001, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. Q. H. Nguyen, S. B. Choi, Y. S. Lee, and M. S. Han, “Optimal design of high damping force engine mount featuring MR valve structure with both annular and radial flow paths,” Smart Materials and Structures, vol. 22, no. 11, Article ID 115024, 2013. View at Publisher · View at Google Scholar
  11. D. X. Phu, K. Shah, and S.-B. Choi, “A new magnetorheological mount featured by changeable damping gaps using a moved-plate valve structure,” Smart Materials and Structures, vol. 23, no. 12, Article ID 125022, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. M.-S. Seong, S.-B. Choi, and C.-H. Kim, “Design and performance evaluation of MR damper for integrated isolation mount,” Journal of Intelligent Material Systems and Structures, vol. 22, no. 15, pp. 1729–1738, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. D. York, X. Wang, and F. Gordaninejad, “A new magnetorheological mount for vibration control,” Journal of Vibration and Acoustics, vol. 133, no. 3, Article ID 031003, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. O. H. Kang, W. H. Kim, W. H. Joo, and J. H. Park, “Design of the magnetorheological mount with high damping force for medium speed diesel generators,” in Active and Passive Smart Structures and Integrated Systems, vol. 8688 of Proceedings of SPIE, San Diego, Calif, USA, March 2013. View at Publisher · View at Google Scholar
  15. N. Q. Hung, P. D. Xuan, P. J. Hee, C. Seung-Bok, and K. O. Hyun, “Development of high damping magneto-rheological mount for ship engines,” Applied Mechanics and Materials, vol. 336–338, pp. 953–959, 2013. View at Google Scholar
  16. Y. Rasekhipour and A. Ohadi, “Evaluating vibration performance of a semi-active MR engine mount,” in Proceedings of the 2nd International Conference on Control, Instrumentation and Automation (ICCIA '11), pp. 90–95, IEEE, Shiraz, Iran, December 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Mansour, S. Arzanpour, M. F. Golnaraghi, and A. M. Parameswaran, “Semi-active engine mount design using auxiliary magneto-rheological fluid compliance chamber,” Vehicle System Dynamics, vol. 49, no. 3, pp. 449–462, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Y. Abd Fatah, S. A. Mazlan, T. Koga, H. Zamzuri, M. Zeinali, and F. Imaduddin, “A review of design and modeling of magnetorheological valve,” International Journal of Modern Physics B, vol. 29, no. 4, Article ID 1530004, 2015. View at Publisher · View at Google Scholar
  19. X. P. Do, J. U. Chung, and S. B. Choi, “Design and analysis of an innovative combined magneto-rheological damper-mount,” in Active and Passive Smart Structures and Integrated Systems, vol. 9431 of Proceedings of SPIE, April 2015. View at Publisher · View at Google Scholar
  20. J. U. Chung, X. P. Do, and S.-B. Choi, “Optimization of new magnetorheological fluid mount for vibration control of start/stop engine mode,” in Active and Passive Smart Structures and Integrated Systems, vol. 9431 of Proceedings of SPIE, April 2015. View at Publisher · View at Google Scholar
  21. D. X. Phu, N. V. Quoc, J.-H. Park, and S.-B. Choi, “Design of a novel adaptive fuzzy sliding mode controller and application for vibration control of magnetorheological mount,” Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, vol. 228, no. 13, pp. 2285–2302, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. S.-R. Hong and S.-B. Choi, “Vibration control of a structural system using magneto-rheological fluid mount,” Journal of Intelligent Material Systems and Structures, vol. 16, no. 11-12, pp. 931–936, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. S.-R. Hong, S.-B. Choi, and M.-S. Han, “Vibration control of a frame structure using electro-rheological fluid mounts,” International Journal of Mechanical Sciences, vol. 44, no. 10, pp. 2027–2045, 2002. View at Publisher · View at Google Scholar · View at Scopus
  24. S.-B. Choi, S.-R. Hong, K.-G. Sung, and J.-W. Sohn, “Optimal control of structural vibrations using a mixed-mode magnetorheological fluid mount,” International Journal of Mechanical Sciences, vol. 50, no. 3, pp. 559–568, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. D. E. Barber and J. D. Carlson, “Performance characteristics of prototype MR engine mounts containing glycol MR fluids,” Journal of Intelligent Material Systems and Structures, vol. 21, no. 15, pp. 1509–1516, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. Y.-T. Choi, N. M. Wereley, and Y.-S. Jeon, “Semi-active vibration isolation using magnetorheological isolators,” Journal of Aircraft, vol. 42, no. 5, pp. 1244–1251, 2005. View at Publisher · View at Google Scholar · View at Scopus
  27. B. Tang and M. J. Brennan, “On the shock performance of a nonlinear vibration isolator with high-static-low-dynamic-stiffness,” International Journal of Mechanical Sciences, vol. 81, pp. 207–214, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. A. Farjoud, R. Taylor, E. Schumann, and T. Schlangen, “Advanced semi-active engine and transmission mounts: tools for modelling, analysis, design, and tuning,” Vehicle System Dynamics, vol. 52, no. 2, pp. 218–243, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Dominguez, R. Sedaghati, and I. Stiharu, “Modeling and application of MR dampers in semi-adaptive structures,” Computers and Structures, vol. 86, no. 3–5, pp. 407–415, 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Domínguez-González, I. Stiharu, and R. Sedaghati, “Practical hysteresis model for magnetorheological dampers,” Journal of Intelligent Material Systems and Structures, vol. 25, no. 8, pp. 967–979, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. P. Guo, X. Guan, and J. Ou, “Physical modeling and design method of the hysteretic behavior of magnetorheological dampers,” Journal of Intelligent Material Systems and Structures, vol. 25, no. 6, pp. 680–696, 2014. View at Publisher · View at Google Scholar · View at Scopus
  32. S. B. Choi and Y. M. Han, Magnetorheological Fluid Technology: Applications in Vehicle Systems, CRC Press, Taylor & Francis, Boca Raton, Fla, USA, 2013.
  33. S. R. Hong, N. M. Wereley, Y. T. Choi, and S. B. Choi, “Analytical and experimental validation of a nondimensional Bingham model for mixed-mode magnetorheological dampers,” Journal of Sound and Vibration, vol. 312, no. 3, pp. 399–417, 2008. View at Publisher · View at Google Scholar · View at Scopus