Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 1218767, 14 pages
http://dx.doi.org/10.1155/2016/1218767
Research Article

Pyroshock Prediction of Ridge-Cut Explosive Bolts Using Hydrocodes

1Department of Aerospace Engineering, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
2Department of Aerospace Engineering, Chonbuk National University, 567 Baekje-daero, Duckjin-gu, Jeonju, Jeonbuk 54896, Republic of Korea
3Energetic Materials & Pyrotechnics Department, Defence R&D Center, Hanwha Corporation, 99 Oesam-ro-8-Beon-gil, Yuseong-gu, Daejeon 34060, Republic of Korea
4Advanced Propulsion Technology Center, The 4th R&D Institute, Agency for Defense Development, Yoseong, P.O. Box 35, Yuseong-gu, Daejeon 34186, Republic of Korea

Received 7 May 2016; Accepted 10 July 2016

Academic Editor: Evgeny Petrov

Copyright © 2016 Juho Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. O. Brauer, Handbook of Pyrotechnics, Chemical Publishing Co, New York, NY, USA, 1974.
  2. L. J. Bement and M. L. Schimmel, A Manual for Pyrotechnic Design, Development and Qualification, NASA, 1995.
  3. M. G. Ryschkewitsch, Pyroshock Test Criteria, NASA, 2011.
  4. A. G. Piersol, T. L. Paez, and C. M. Harris, Harris' Shock and Vibration Handbook, McGraw-Hill, New York, NY, USA, 6th edition, 2010.
  5. DOD, Pyroshock, MIL-STD-810G Method 517.1, Department of Defense, New York, NY, USA, 2008.
  6. IEST, Pyroshock Testing Techniques, Institute of Environmental Sciences and Technology, 2009.
  7. V. I. Bateman, H. Himelblau, and R. Merritt, “Validation of Pyroshock Data,” Sound & Vibration Magazine, 2012.
  8. P. L. Walter, Accelerometer Limitations for Pyroshock Measurements, Sound & Vibration Magazine, 2009.
  9. V. I. Bateman, “Pyroshock standards,” Sound & Vibration Magazine, 2011. View at Google Scholar
  10. C. J. Litz Jr., “Laser doppler vibrometer: application of DOE/Taguchi methodologies to pyroshock response spectra,” Shock and Vibration, vol. 4, no. 2, pp. 115–123, 1997. View at Publisher · View at Google Scholar · View at Scopus
  11. J.-R. Lee, C. C. Chia, and C.-W. Kong, “Review of pyroshock wave measurement and simulation for space systems,” Measurement, vol. 45, no. 4, pp. 631–642, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Y. Chong, J. R. Lee, and C. W. Kong, “Shock response spectra reconstruction of pointwise explosive-induced pyroshock based on signal processing of laser shocks,” Shock and Vibration, vol. 2014, Article ID 695836, 14 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. J.-K. Jang and J.-R. Lee, “Nondestructive prediction of point source pyroshock response spectra based on experimental conditioning of laser-induced shocks,” Optics and Laser Technology, vol. 61, pp. 24–33, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. J.-R. Lee, J.-K. Jang, M. Choi, and C.-W. Kong, “Visualization and simulation of a linear explosive-induced pyroshock wave using Q-switched laser and phased array transducers in a space launcher composite structure,” Optics and Laser Technology, vol. 67, pp. 12–19, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Rabbiolo, R. J. Bernhard, and F. A. Milner, “Definition of a high-frequency threshold for plates and acoustical spaces,” Journal of Sound and Vibration, vol. 277, no. 4-5, pp. 647–667, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. M. de Benedetti, G. Garofalo, M. Zumpano, and R. Barboni, “On the damping effect due to bolted junctions in space structures subjected to pyro-shock,” Acta Astronautica, vol. 60, no. 12, pp. 947–956, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Lee, J. Han, H. Jang, S. Woo, and K. Kim, “Shock response prediction of a low altitude earth observation satellite during launch vehicle separation,” International Journal of Aeronautical and Space Sciences, vol. 11, no. 1, pp. 49–57, 2010. View at Publisher · View at Google Scholar
  18. S.-H. Woo and J.-H. Han, “Mid frequency shock response determination by using energy flow method and time domain correction,” Shock and Vibration, vol. 20, no. 5, pp. 847–861, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. J. A. Zukas, Introduction to Hydrocodes, Elsevier, Amsterdam, The Netherlands, 2004.
  20. S. K. Roy, M. Trabia, B. O’Toole et al., “Study of hypervelocity projectile impact on thick metal plates,” Shock and Vibration, vol. 2016, Article ID 4313480, 11 pages, 2016. View at Publisher · View at Google Scholar
  21. J. Bayandor, R. S. Thomson, M. L. Scott, M. Q. Nguyen, and D. J. Elder, “Investigation of impact and damage tolerance in advanced aerospace composite structures,” International Journal of Crashworthiness, vol. 8, no. 3, pp. 297–306, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. N. Tsartsaris, M. Meo, F. Dolce, U. Polimeno, M. Guida, and F. Marulo, “Low-velocity impact behavior of fiber metal laminates,” Journal of Composite Materials, vol. 45, no. 7, pp. 803–814, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. F. Abdi, K. Bowcutt, C. Godines, and J. Bayandor, “Collision provoked failure sequencing in space reentry vehicles,” Computers and Structures, vol. 89, no. 11-12, pp. 930–939, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. S. V. Perino, J. Bayandor, J. A. Samareh, and S. C. Armand, “Contemporary impact analysis methodology for planetary sample return missions,” Journal of Spacecraft and Rockets, vol. 52, no. 4, pp. 1217–1227, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. A. J. Siddens, J. Bayandor, and F. Abdi, “Soft impact damage prognosis of F-16 canopy using progressive failure dynamic analysis,” Journal of Aircraft, vol. 51, no. 6, pp. 1959–1965, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Lee, J.-H. Han, Y. Lee, and H. Lee, “Separation characteristics study of ridge-cut explosive bolts,” Aerospace Science and Technology, vol. 39, pp. 153–168, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. J. Lee, J.-H. Han, Y. Lee, and H. Lee, “A parametric study of ridge-cut explosive bolts using hydrocodes,” International Journal of Aeronautical and Space Sciences, vol. 16, no. 1, pp. 50–63, 2015. View at Publisher · View at Google Scholar
  28. D. L. Feng, M. B. Liu, H. Q. Li, and G. R. Liu, “Smoothed particle hydrodynamics modeling of linear shaped charge with jet formation and penetration effects,” Computers and Fluids, vol. 86, pp. 77–85, 2013. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  29. G. Hussain, A. Hameed, I. Horsfall, P. Barton, and A. Q. Malik, “Experimental and simulation optimization analysis of the Whipple shields against shaped charge,” Acta Mechanica Sinica, vol. 28, no. 3, pp. 877–884, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Lim, “Jet velocity profile of linear shaped charges based on an arced liner collapse,” Journal of Energetic Materials, vol. 31, no. 4, pp. 239–250, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Choi, J.-R. Lee, and C.-W. Kong, “Development of a numerical model for an expanding tube with linear explosive using AUTODYN,” Shock and Vibration, vol. 2014, Article ID 436156, 10 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  32. E. F. Poncelet, Theory of Ridge-Cut, Stanford Research Institute, Stanford, Calif, USA, 1954.
  33. T. Irvine, An Introduction to the Shock Response Spectrum, Revision S, Vibrationdata, 2012.
  34. M. A. Meyers, Dynamic Behavior of Materials, John Wiley & Sons, New York, NY, USA, 1994.
  35. P. W. Cooper, Explosives Engineering, VCH, New York, NY, USA, 1996.
  36. G. R. Johnson and W. H. Cook, “A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures,” in Proceedings of the 7th International Symposium on Ballistics, pp. 541–547, The Hague, Netherlands, 1983.
  37. E. L. Lee, H. C. Hornig, and J. W. Kury, Adiabatic Expansion of High Explosive Detonation Products, Lawrence Radiation Laboratory, 1968.