Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 2346025, 13 pages
http://dx.doi.org/10.1155/2016/2346025
Research Article

A Water Hammer Protection Method for Mine Drainage System Based on Velocity Adjustment of Hydraulic Control Valve

1Research Institute of Machinery and Electronics, Taiyuan University of Technology, Taiyuan 030024, China
2Key Laboratory of Advanced Transducers & Intelligent Control System, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
3Taiyuan University of Technology College of Mechanical Engineering, Mine Fluid Control Engineering Research Center (Laboratory) in Shanxi Province, Taiyuan 030024, China

Received 3 June 2015; Accepted 28 September 2015

Academic Editor: Mario Terzo

Copyright © 2016 Yanfei Kou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Sun, X.-R. Ru, and L.-F. Zhai, “In-situ fabrication of supported iron oxides from synthetic acid mine drainage: high catalytic activities and good stabilities towards electro-Fenton reaction,” Applied Catalysis B: Environmental, vol. 165, pp. 103–110, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Kaliatka, M. Vaišnoras, and M. Valinčius, “Modelling of valve induced water hammer phenomena in a district heating system,” Computers & Fluids, vol. 94, pp. 30–36, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. N. Jeong, D. Chi, and J. Yoon, “Analytic estimation of the impact pressure in a beam-tube due to water-hammer effect,” Journal of Nuclear Science and Technology, vol. 50, no. 12, pp. 1139–1149, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. W. S. Yi, J. Jiang, D. D. Li, G. Lan, and Z. Zhao, “Pump-stopping water hammer simulation based on RELAP5,” IOP Conference Series: Materials Science and Engineering, vol. 52, no. 7, Article ID 072009, 2013. View at Publisher · View at Google Scholar
  5. Q. W. Yong, M. Jiang, and Y. Tang, “Study on liquid pipeline water hammer and protective device with gas concentration,” Advanced Materials Research, vol. 616–618, pp. 774–777, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Zhang, J. Gao, M. Diao, W. Wu, T. Wang, and S. Qi, “A case study on risk assessment of long distance water supply system,” Procedia Engineering, vol. 70, pp. 1762–1771, 2014. View at Publisher · View at Google Scholar
  7. K. I. M. Sang-Gyun, L. E. E. Kye-Bock, and K. I. M. Kyung-Yup, “Water hammer in the pump-rising pipeline system with an air chamber,” Journal of Hydrodynamics, Series B, vol. 26, no. 6, pp. 960–964, 2015. View at Publisher · View at Google Scholar
  8. M. A. Bouaziz, M. A. Guidara, C. Schmitt, E. Hadj-Taïeb, and Z. Azari, “Water hammer effects on a gray cast iron water network after adding pumps,” Engineering Failure Analysis, vol. 44, pp. 1–16, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. M. S. Ghidaoui, M. Zhao, D. A. McInnis, and D. H. Axworthy, “A review of water hammer theory and practice,” Applied Mechanics Reviews, vol. 58, no. 1–6, pp. 49–76, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. A. F. Colombo, P. Lee, and B. W. Karney, “A selective literature review of transient-based leak detection methods,” Journal of Hydro-Environment Research, vol. 2, no. 4, pp. 212–227, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. P. J. Lee, M. F. Lambert, A. R. Simpson, J. P. Vítkovský, and D. Misiunas, “Leak location in single pipelines using transient reflections,” Australian Journal of Water Resources, vol. 11, no. 1, pp. 53–65, 2007. View at Google Scholar
  12. N. S. Arbon, M. F. Lambert, A. R. Simpson, and M. L. Stephens, “Field test investigations into distributed fault modeling in water distribution systems using transient testing,” in Proceedings of the World Environmental and Water Resources Congress, Tampa, Fla, USA, May 2007.
  13. J. Gong, A. R. Simpson, M. F. Lambert, A. C. Zecchin, Y.-I. Kim, and A. S. Tijsseling, “Detection of distributed deterioration in single pipes using transient reflections,” Journal of Pipeline Systems Engineering and Practice, vol. 4, no. 1, pp. 32–40, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Ferrante, B. Brunone, and S. Meniconi, “Leak detection in branched pipe systems coupling wavelet analysis and a Lagrangian model,” Journal of Water Supply: Research and Technology, vol. 58, no. 2, pp. 95–106, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Meniconi, B. Brunone, and M. Ferrante, “Water-hammer pressure waves interaction at cross-section changes in series in viscoelastic pipes,” Journal of Fluids and Structures, vol. 33, pp. 44–58, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. W. H. Hager, “Swiss contributions to water hammer theory,” Journal of Hydraulic Research, vol. 39, no. 1, pp. 3–7, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. M. S. Ghidaoui and B. W. Karney, “Modified transformation and integration of 1D wave equations,” Journal of Hydraulic Engineering, vol. 121, no. 10, pp. 758–760, 1995. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Adamkowski and M. Lewandowski, “Cavitation characteristics of shutoff valves in numerical modeling of transients in pipelines with column separation,” Journal of Hydraulic Engineering, vol. 141, no. 2, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. E. Yao, G. Kember, and D. Hansen, “Analysis of water hammer attenuation in applications with varying valve closure times,” Journal of Engineering Mechanics, vol. 141, no. 1, Article ID 04014107, 2014. View at Publisher · View at Google Scholar · View at Scopus
  20. R. Korbar, Z. Virag, and M. Šavar, “Truncated method of characteristics for quasi-two-dimensional water hammer model,” Journal of Hydraulic Engineering, vol. 140, no. 6, Article ID 04014013, 2014. View at Publisher · View at Google Scholar
  21. M. Rohani and M. H. Afshar, “Simulation of transient flow caused by pump failure: point-implicit method of characteristics,” Annals of Nuclear Energy, vol. 37, no. 12, pp. 1742–1750, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Triki, “Multiple-grid finite element solution of the shallow water equations: water hammer phenomenon,” Computers & Fluids, vol. 90, pp. 65–71, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Keramat, A. S. Tijsseling, Q. Hou, and A. Ahmadi, “Fluid-structure interaction with pipe-wall viscoelasticity during water hammer,” Journal of Fluids and Structures, vol. 28, pp. 434–455, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. S.-G. Kim, K.-B. Lee, and K.-Y. Kim, “Water hammer in the pump-rising pipeline system with an air chamber,” Journal of Hydrodynamics, vol. 26, no. 6, pp. 960–964, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. E. B. Wylie and V. L. Streeter, Fluid Transients, McGraw-Hill, New York, NY, USA, 1978.
  26. W. Wan, W. Huang, and C. Li, “Sensitivity analysis for the resistance on the performance of a pressure vessel for water hammer protection,” Journal of Pressure Vessel Technology—Transactions of the ASME, vol. 136, no. 1, Article ID 011303, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. G. De Martino, F. De Paola, N. Fontana, and M. Giugni, “Discussion of ‘simple guide for design of air vessels for water hammer protection of pumping lines’ by D. Stephenson,” Journal of Hydraulic Engineering, vol. 130, no. 3, pp. 273–275, 2004. View at Publisher · View at Google Scholar
  28. T. S. Lee, “Air influence on hydraulic transients on fluid system with air valves,” Journal of Fluids Engineering, vol. 121, no. 3, pp. 646–650, 1999. View at Publisher · View at Google Scholar · View at Scopus
  29. D. Stephenson, “Effects of air valves and pipework on water hammer pressures,” Journal of Transportation Engineering, vol. 123, no. 2, pp. 101–106, 1997. View at Publisher · View at Google Scholar · View at Scopus