Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 3586230, 22 pages
http://dx.doi.org/10.1155/2016/3586230
Research Article

Kriging Surrogate Models for Predicting the Complex Eigenvalues of Mechanical Systems Subjected to Friction-Induced Vibration

1Laboratoire de Tribologie et Dynamique des Systèmes, UMR CNRS 5513, École Centrale de Lyon, 36 avenue Guy de Collongue, 69134 Écully Cedex, France
2PSA Peugeot Citroën, Centre Technique de la Garenne Colombes, 18 rue des Fauvelles, 92250 La Garenne-Colombes, France
3Institut Universitaire de France, 75005 Paris, France

Received 7 June 2016; Revised 2 September 2016; Accepted 18 September 2016

Academic Editor: Matteo Aureli

Copyright © 2016 E. Denimal et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. A. Ibrahim, “Friction-induced vibration, chatter, squeal, and chaos—part I: mechanics of contact and friction,” Applied Mechanics Reviews, vol. 47, no. 7, pp. 209–226, 1994. View at Publisher · View at Google Scholar
  2. R. A. Ibrahim, “Friction-induced vibration, chatter, squeal, and chaos—part I: mechanics of contact and friction,” Applied Mechanics Review, vol. 47, no. 7, pp. 209–226, 1994. View at Publisher · View at Google Scholar
  3. D. A. Crolla and A. M. Lang, “Brake noise and vibration—state of art,” in Vehicule Tribology, vol. 18 of Tribology, pp. 165–174, Elsevier, 1991. View at Publisher · View at Google Scholar
  4. A. Papinniemi, J. C. S. Lai, J. Zhao, and L. Loader, “Brake squeal: a literature review,” Applied Acoustics, vol. 63, no. 4, pp. 391–400, 2002. View at Publisher · View at Google Scholar · View at Scopus
  5. N. M. Kinkaid, O. M. O'Reilly, and P. Papadopoulos, “Automotive disc brake squeal,” Journal of Sound and Vibration, vol. 267, no. 1, pp. 105–166, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. R. Spurr, “A theory of brake squeal,” Proceedings of the Institution of Mechanical Engineers: Automobile Division, vol. 15, no. 1, pp. 33–52, 1961. View at Publisher · View at Google Scholar
  7. A. R. AbuBakar and H. Ouyang, “Complex eigenvalue analysis and dynamic transient analysis in predicting disc brake squeal,” International Journal of Vehicle Noise and Vibration, vol. 2, no. 2, pp. 143–155, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. A. R. AbuBakar and H. Ouyang, “A prediction methodology of disk brake squeal using complex eigenvalue analysis,” International Journal of Vehicle Design, vol. 46, no. 4, pp. 416–435, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. J.-J. Sinou, “Transient non-linear dynamic analysis of automotive disc brake squeal—on the need to consider both stability and non-linear analysis,” Mechanics Research Communications, vol. 37, no. 1, pp. 96–105, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Loyer, J.-J. Sinou, O. Chiello, and X. Lorang, “Study of nonlinear behaviors and modal reductions for friction destabilized systems. Application to an elastic layer,” Journal of Sound and Vibration, vol. 331, no. 5, pp. 1011–1041, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Ouyang, W. Nack, Y. Yuan, and F. Chen, “Numerical analysis of automotive disc brake squeal: a review,” International Journal of Vehicle Noise and Vibration, vol. 1, no. 3-4, pp. 207–231, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. F. Massi, L. Baillet, O. Giannini, and A. Sestieri, “Brake squeal: linear and nonlinear numerical approaches,” Mechanical Systems and Signal Processing, vol. 21, no. 6, pp. 2374–2393, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Nechak, F. Gillot, S. Besset, and J.-J. Sinou, “Sensitivity analysis and Kriging based models for robust stability analysis of brake systems,” Mechanics Research Communications, vol. 69, pp. 136–145, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. R. G. Ghanem and P. D. Spanos, Stochastic Finite Elements: A Spectral Approach, Springer, New York, NY, USA, 1991. View at Publisher · View at Google Scholar · View at MathSciNet
  15. L. Nechak, S. Berger, and E. Aubry, “A polynomial chaos approach to the robust analysis of the dynamic behaviour of friction systems,” European Journal of Mechanics—A/Solids, vol. 30, no. 4, pp. 594–607, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Nechak, S. Berger, and E. Aubry, “Non-intrusive generalized polynomial chaos for the robust stability analysis of uncertain nonlinear dynamic friction systems,” Journal of Sound and Vibration, vol. 332, no. 5, pp. 1204–1215, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. E. Sarrouy, O. Dessombz, and J.-J. Sinou, “Stochastic study of non-linear self-excited system with friction,” European Journal of Mechanics A: Solids, vol. 40, pp. 1–10, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  18. Z. Zhang, S. Oberst, and J. C. S. Lai, “On the potential of uncertainty analysis for prediction of brake squeal propensity,” Journal of Sound and Vibration, vol. 377, pp. 123–132, 2016. View at Publisher · View at Google Scholar
  19. A. Culla and F. Massi, “Uncertainty model for contact instability prediction,” Journal of the Acoustical Society of America, vol. 126, no. 3, pp. 1111–1119, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. L. Nechak, S. Berger, and E. Aubry, “Prediction of random self friction-induced vibrations in uncertain dry friction systems using a multi-element generalized polynomial chaos approach,” Journal of Vibration and Acoustics, vol. 134, no. 4, Article ID 041015, 14 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Lü and D. Yu, “Stability analysis and improvement of uncertain disk brake systems with random and interval parameters for squeal reduction,” Journal of Vibration and Acoustics, vol. 137, no. 5, Article ID 051003, 11 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Lü and D. Yu, “Optimization design of a disc brake system with hybrid uncertainties,” Journal of Advances in Engineering Software, vol. 98, pp. 112–122, 2016. View at Publisher · View at Google Scholar
  23. M. Kamiński, “Stochastic perturbation approach to engineering structure vibrations by the finite difference method,” Journal of Sound and Vibration, vol. 251, no. 4, pp. 651–670, 2002. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Butlin and J. Woodhouse, “Friction-induced vibration: quantifying sensitivity and uncertainty,” Journal of Sound and Vibration, vol. 329, no. 5, pp. 509–526, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Nobari, H. Ouyang, and P. Bannister, “Statistics of complex eigenvalues in friction-induced vibration,” Journal of Sound and Vibration, vol. 338, pp. 169–183, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Sacks, W. J. Welch, T. J. Mitchell, and H. P. Wynn, “Design and analysis of computer experiments,” Statistical Science, vol. 4, no. 4, pp. 409–435, 1989. View at Google Scholar · View at MathSciNet
  27. J. Sondergaard, S. N. Lophaven, and H. B. Nielsen, Dace a Matlab Kriging Toolbox. Technical Report, Technical University of Denmark, 2002.
  28. J. P. C. Kleijnen, “Kriging metamodeling in simulation: a review,” European Journal of Operational Research, vol. 192, no. 3, pp. 707–716, 2009. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  29. J. P. Kleijnen, “Regression and Kriging metamodels with their experimental designs in simulation: a review,” European Journal of Operational Research, vol. 256, no. 1, pp. 1–16, 2017. View at Publisher · View at Google Scholar · View at MathSciNet
  30. A. Nobari, H. Ouyang, and P. Bannister, “Uncertainty quantification of squeal instability via surrogate modelling,” Mechanical Systems and Signal Processing, vol. 60, pp. 887–908, 2015. View at Publisher · View at Google Scholar · View at Scopus
  31. J. Hultén, “Friction phenomena related to drum brake squeal instabilities,” in Proceedings of the ASME Design Engineering Technical Conferences, 16th Biennial Conference on Mechanical Vibration & Noise, Sacramento, Calif, USA, September 1997.
  32. J. Hultén, “Brake squeal—a self-exciting mechanism with constant friction,” Tech. Rep. SAE Technical Paper, SAE International, 1993. View at Google Scholar
  33. J.-J. Sinou and L. Jézéquel, “Mode coupling instability in friction-induced vibrations and its dependency on system parameters including damping,” European Journal of Mechanics—A/Solids, vol. 26, no. 1, pp. 106–122, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. L. Nechak, S. Berger, and E. Aubry, “Wiener-Askey and Wiener-Haar expansions for the analysis and prediction of limit cycle oscillations in uncertain nonlinear dynamic friction systems,” Journal of Computational and Nonlinear Dynamics, vol. 9, no. 2, Article ID 021007, 2014. View at Publisher · View at Google Scholar · View at Scopus
  35. K. Soobbarayen, S. Besset, and J.-J. Sinou, “Noise and vibration for a self-excited mechanical system with friction,” Applied Acoustics, vol. 74, no. 10, pp. 1191–1204, 2013. View at Publisher · View at Google Scholar · View at Scopus
  36. S. Oberst, J. C. S. Lai, and S. Marburg, “Guidelines for numerical vibration and acoustic analysis of disc brake squeal using simple models of brake systems,” Journal of Sound and Vibration, vol. 332, no. 9, pp. 2284–2299, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. D. R. Jones, M. Schonlau, and W. J. Welch, “Efficient global optimization of expensive black-box functions,” Journal of Global Optimization, vol. 13, no. 4, pp. 455–492, 1998. View at Publisher · View at Google Scholar · View at MathSciNet