A Study on Ultrasonic Elliptical Vibration Cutting of Inconel 718

Figure 8

Photographs of the flank wear under different cutting conditions.

(a) 0.1 mm depth of cut, 0.2 mm feed rate, and 16 m/min cutting speed

(b) 0.12 mm depth of cut, 0.2 mm feed rate, and 16 m/min cutting speed

(c) 0.1 mm depth of cut, 0.08 mm feed rate, and 16 m/min cutting speed

(d) 0.1 mm depth of cut, 0.08 mm feed rate, and 10 m/min cutting speed