Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016 (2016), Article ID 4792786, 17 pages
http://dx.doi.org/10.1155/2016/4792786
Research Article

Effect of Temperature Variation on Modal Frequency of Reinforced Concrete Slab and Beam in Cold Regions

College of Transportation, Jilin University, Changchun 130025, China

Received 3 January 2016; Revised 17 May 2016; Accepted 1 June 2016

Academic Editor: Mickaël Lallart

Copyright © 2016 Hanbing Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Q. Ni, X. W. Ye, and J. M. Ko, “Monitoring-based fatigue reliability assessment of steel bridges: analytical model and application,” Journal of Structural Engineering, vol. 136, no. 12, pp. 1563–1573, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. J. M. Ko and Y. Q. Ni, “Technology developments in structural health monitoring of large-scale bridges,” Engineering Structures, vol. 27, no. 12, pp. 1715–1725, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Q. Ni, X. W. Ye, and J. M. Ko, “Modeling of stress spectrum using long-term monitoring data and finite mixture distributions,” Journal of Engineering Mechanics, vol. 138, no. 2, pp. 175–183, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. P. J. S. Cruz and R. Salgado, “Performance of vibration-based damage detection methods in bridges,” Computer-Aided Civil and Infrastructure Engineering, vol. 24, no. 1, pp. 62–79, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Alvandi and C. Cremona, “Assessment of vibration-based damage identification techniques,” Journal of Sound and Vibration, vol. 292, no. 1-2, pp. 179–202, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. I. Talebinejad, C. Fischer, and F. Ansari, “Numerical evaluation of vibration-based methods for damage assessment of cable-stayed bridges,” Computer-Aided Civil and Infrastructure Engineering, vol. 26, no. 3, pp. 239–251, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. J. H. G. Macdonald and W. E. Daniell, “Variation of modal parameters of a cable-stayed bridge identified from ambient vibration measurements and FE modelling,” Engineering Structures, vol. 27, no. 13, pp. 1916–1930, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. D. F. Giraldo, S. J. Dyke, and J. M. Caicedo, “Damage detection accommodating varying environmental conditions,” Structural Health Monitoring, vol. 5, no. 2, pp. 155–172, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. B. Moaveni and I. Behmanesh, “Effects of changing ambient temperature on finite element model updating of the Dowling Hall Footbridge,” Engineering Structures, vol. 43, pp. 58–68, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. I. Behmanesh and B. Moaveni, “Probabilistic identification of simulated damage on the Dowling Hall footbridge through Bayesian finite element model updating,” Structural Control and Health Monitoring, vol. 22, no. 3, pp. 463–483, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Li, S. Li, J. Ou, and H. Li, “Modal identification of bridges under varying environmental conditions: temperature and wind effects,” Structural Control and Health Monitoring, vol. 17, no. 5, pp. 495–512, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. G.-D. Zhou and T.-H. Yi, “A summary review of correlations between temperatures and vibration properties of long-span bridges,” Mathematical Problems in Engineering, vol. 2014, Article ID 638209, 19 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Xia, B. Chen, S. Weng, Y.-Q. Ni, and Y.-L. Xu, “Temperature effect on vibration properties of civil structures: a literature review and case studies,” Journal of Civil Structural Health Monitoring, vol. 2, no. 1, pp. 29–46, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. É. Balmès, M. Basseville, F. Bourquin, L. Mevel, H. Nasser, and F. Treyssède, “Merging sensor data from multiple temperature scenarios for vibration monitoring of civil structures,” Structural Health Monitoring, vol. 7, no. 2, pp. 129–142, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Xia, H. Hao, G. Zanardo, and A. Deeks, “Long term vibration monitoring of an RC slab: temperature and humidity effect,” Engineering Structures, vol. 28, no. 3, pp. 441–452, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Moser and B. Moaveni, “Environmental effects on the identified natural frequencies of the Dowling Hall Footbridge,” Mechanical Systems and Signal Processing, vol. 25, no. 7, pp. 2336–2357, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. P. Cornwell, C. R. Farrar, S. W. Doebling, and H. Sohn, “Environmental variability of modal properties,” Experimental Techniques, vol. 23, no. 6, pp. 45–48, 1999. View at Google Scholar · View at Scopus
  18. H. Sohn, M. Dzwonczyk, E. G. Straser, A. S. Kiremidjian, K. Law, and T. Meng, “An experimental study of temperature effect on modal parameters of the Alamosa Canyon Bridge,” Earthquake Engineering and Structural Dynamics, vol. 28, no. 7-8, pp. 879–897, 1999. View at Publisher · View at Google Scholar · View at Scopus
  19. C. R. Farrar, S. W. Doebling, P. J. Cornwell, and E. G. Straser, “Variability of modal parameters measured on the Alamosa Canyon bridge,” in Proceedings of the 15th International Modal Analysis Conference (IMAC ’97), pp. 257–263, Orlando, Fla, USA, February 1997. View at Scopus
  20. B. Peeters and G. De Roeck, “One-year monitoring of the Z24-bridge: environmental effectsversus damage events,” Earthquake Engineering and Structural Dynamics, vol. 30, no. 2, pp. 149–171, 2001. View at Google Scholar · View at Scopus
  21. J. Maeck, B. Peeters, and G. De Roeck, “Damage identification on the Z24-bridge using vibration monitoring analysis,” in Proceedings of the European COST F3 Conference on System Identification and Structural Health Monitoring, pp. 233–242, 2000.
  22. V. Askegaard and P. Mossing, “Long term observation of RC-bridge using changes in natural frequency,” Nordic Concrete Research, vol. 7, pp. 20–27, 1988. View at Google Scholar · View at Scopus
  23. S. L. Desjardins, N. A. Londoño, D. T. Lau, and H. Khoo, “Real-time data processing, analysis and visualization for structural monitoring of the confederation bridge,” Advances in Structural Engineering, vol. 9, no. 1, pp. 141–157, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. C. Liu and J. T. DeWolf, “Effect of temperature on modal variability of a curved concrete bridge under ambient loads,” Journal of Structural Engineering, vol. 133, no. 12, pp. 1742–1751, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. A. A. Mosavi, R. Seracino, and S. Rizkalla, “Effect of temperature on daily modal variability of a steel-concrete composite bridge,” Journal of Bridge Engineering, vol. 17, no. 6, pp. 979–983, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Breccolotti, G. Franceschini, and A. L. Materazzi, “Sensitivity of dynamic methods for damage detection in structural concrete bridges,” Shock and Vibration, vol. 11, no. 3-4, pp. 383–394, 2004. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. L. Ding and A. Q. Li, “Temperature-induced variations of measured modal frequencies of steel box girder for a long-span suspension bridge,” International Journal of Steel Structures, vol. 11, no. 2, pp. 145–155, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. C. Liu, J. T. DeWolf, and J.-H. Kim, “Development of a baseline for structural health monitoring for a curved post-tensioned concrete box-girder bridge,” Engineering Structures, vol. 31, no. 12, pp. 3107–3115, 2009. View at Publisher · View at Google Scholar · View at Scopus
  29. J. D. Hios and S. D. Fassois, “Stochastic identification of temperature effects on the dynamics of a smart composite beam: assessment of multi-model and global model approaches,” Smart Materials and Structures, vol. 18, no. 3, Article ID 035011, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. Xia, Y.-L. Xu, Z.-L. Wei, H.-P. Zhu, and X.-Q. Zhou, “Variation of structural vibration characteristics versus non-uniform temperature distribution,” Engineering Structures, vol. 33, no. 1, pp. 146–153, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. National Standard of the People’s Republic of China, “Standard for evaluation of concrete compressive strength,” Tech. Rep. GB/T50107, 2010 (Chinese).
  32. P. Moser and B. Moaveni, “Design and deployment of a continuous monitoring system for the dowling hall footbridge,” Experimental Techniques, vol. 37, no. 1, pp. 15–26, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. H. F. Zhou, Y. Q. Ni, and J. M. Ko, “Constructing input to neural networks for modeling temperature-caused modal variability: mean temperatures, effective temperatures, and principal components of temperatures,” Engineering Structures, vol. 32, no. 6, pp. 1747–1759, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. X. He, Vibration-based damage identification and health monitoring of civil structures [Ph.D. thesis], Department of Structural Engineering, University of California, San Diego, San Diego, Calif, USA, 2008.
  35. R. Baldwin and M. A. North, “A stress-strain relationship for concrete at high temperatures,” Magazine of Concrete Research, vol. 25, no. 85, pp. 208–212, 1973. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. Jiao, H. Liu, X. Wang, Y. Zhang, G. Luo, and Y. Gong, “Temperature effect on mechanical properties and damage identification of concrete structure,” Advances in Materials Science and Engineering, vol. 2014, Article ID 191360, 10 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  37. National Standard of the People’s Republic of China, “Standard for test method of mechanical properties on ordinary concrete,” Tech. Rep. GB/T 50081-2002, 2003 (Chinese).
  38. B. Downie, Effect of moisture and temperature on the mechanical properties of concrete, [Ph.D. thesis], West Virginia University, Morgantown, Va, USA, 2005.
  39. G.-W. Chen, S. Beskhyroun, and P. Omenzetter, “Experimental investigation into amplitude-dependent modal properties of an eleven-span motorway bridge,” Engineering Structures, vol. 107, pp. 80–100, 2016. View at Publisher · View at Google Scholar · View at Scopus
  40. R. G. Grimes, J. G. Lewis, and H. D. Simon, “A shifted block Lanczos algorithm for solving sparse symmetric generalized eigenproblems,” SIAM Journal on Matrix Analysis and Applications, vol. 15, no. 1, pp. 228–272, 1994. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet