Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 5467643, 13 pages
http://dx.doi.org/10.1155/2016/5467643
Research Article

Multiple-Fault Detection Methodology Based on Vibration and Current Analysis Applied to Bearings in Induction Motors and Gearboxes on the Kinematic Chain

1CA Mecatronica, Facultad de Ingenieria, Campus San Juan del Rio, Universidad Autónoma de Querétaro, Rio Moctezuma 249, Colonia San Cayetano, 76807 San Juan del Rio, QRO, Mexico
2Technical University of Catalonia (UPC), Department of Electronic Engineering, MCIA Research Center, Rambla San Nebridi No. 22, Gaia Research Building, 08222 Terrassa, Spain
3CA Procesamiento Digital de Señales, CA Telematica, Division de Ingenierias, Campus Irapuato-Salamanca, Universidad de Guanajuato, Carretera Salamanca-Valle km 3.5 + 1.8, Comunidad de Palo Blanco, 36700 Salamanca, GTO, Mexico

Received 12 November 2015; Accepted 23 February 2016

Academic Editor: Konstantinos N. Gyftakis

Copyright © 2016 Juan Jose Saucedo-Dorantes et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Niu, B.-S. Yang, and M. Pecht, “Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance,” Reliability Engineering & System Safety, vol. 95, no. 7, pp. 786–796, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Bellini, F. Filippetti, C. Tassoni, and G.-A. Capolino, “Advances in diagnostic techniques for induction machines,” IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4109–4126, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. V. T. Tran and B.-S. Yang, “An intelligent condition-based maintenance platform for rotating machinery,” Expert Systems with Applications, vol. 39, no. 3, pp. 2977–2988, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Ayad, D. Chikouche, N. Boukazzoula, and M. Rezki, “Search of a robust defect signature in gear systems across adaptive Morlet wavelet of vibration signals,” IET Signal Processing, vol. 8, no. 9, pp. 918–926, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Frosini, C. Harlisca, and L. Szabó, “Induction machine bearing fault detection by means of statistical processing of the stray flux measurement,” IEEE Transactions on Industrial Electronics, vol. 62, no. 3, pp. 1846–1854, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Antonino-Daviu, M. Riera-Guasp, J. Pons-Llinares et al., “Detection of broken outer-cage bars for double-cage induction motors under the startup transient,” IEEE Transactions on Industry Applications, vol. 48, no. 5, pp. 1539–1548, 2012. View at Publisher · View at Google Scholar
  7. D. A. Tobon-Mejia, K. Medjaher, and N. Zerhouni, “CNC machine tools wear diagnostic and prognostic by using dynamic Bayesian networks,” Mechanical Systems and Signal Processing, vol. 28, pp. 167–182, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Henao, G.-A. Capolino, M. Fernandez-Cabanas et al., “Trends in fault diagnosis for electrical machines: a review of diagnostic techniques,” IEEE Industrial Electronics Magazine, vol. 8, no. 2, pp. 31–42, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. P. Henríquez, J. B. Alonso, M. A. Ferrer, and C. M. Travieso, “Review of automatic fault diagnosis systems using audio and vibration signals,” IEEE Transactions on Systems, Man, and Cybernetics: Systems, vol. 44, no. 5, pp. 642–652, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. P. Bangalore and L. B. Tjernberg, “An artificial neural network approach for early fault detection of gearbox bearings,” IEEE Transactions on Smart Grid, vol. 6, no. 2, pp. 980–987, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. V. Mien, K. Hee-Jun, and S. Kyoo-Sik, “Rolling element bearing fault diagnosis based on non-local means de-noising and empirical mode decomposition,” IET Science, Measurement and Technology, vol. 8, no. 6, pp. 571–578, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. V. C. M. N. Leite, J. G. Borges da Silva, G. F. C. Veloso et al., “Detection of localized bearing faults in induction machines by spectral kurtosis and envelope analysis of stator current,” IEEE Transactions on Industrial Electronics, vol. 62, no. 3, pp. 1855–1865, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Wang, M. Liang, J. Li, W. Cheng, and C. Li, “Bearing fault diagnosis under unknown variable speed via gear noise cancellation and rotational order sideband identification,” Mechanical Systems and Signal Processing, vol. 62-63, pp. 30–53, 2015. View at Publisher · View at Google Scholar
  14. A. Bellini, F. Immovilli, R. Rubini, and C. Tassoni, “Diagnosis of bearing faults in induction machines by vibration or current signals: a critical comparison,” in Proceedings of the IEEE Industry Applications Society Annual Meeting (IAS '08), pp. 1–8, IEEE, Edmonton, Canada, October 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. P.-L. Zhang, B. Li, S.-S. Mi, Y.-T. Zhang, and D.-S. Liu, “Bearing fault detection using multi-scale fractal dimensions based on morphological covers,” Shock and Vibration, vol. 19, no. 6, pp. 1373–1383, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Guoji, S. McLaughlin, X. Yongcheng, and P. White, “Theoretical and experimental analysis of bispectrum of vibration signals for fault diagnosis of gears,” Mechanical Systems and Signal Processing, vol. 43, no. 1-2, pp. 76–89, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. P. A. Delgado-Arredondo, A. Garcia-Perez, D. Morinigo-Sotelo et al., “Comparative study of time-frequency decomposition techniques for fault detection in induction motors using vibration analysis during startup transient,” Shock and Vibration, vol. 2015, Article ID 708034, 14 pages, 2015. View at Publisher · View at Google Scholar
  18. B. Trajin, J. Regnier, and J. Faucher, “Comparison between vibration and stator current analysis for the detection of bearing faults in asynchronous drives,” IET Electric Power Applications, vol. 4, no. 2, pp. 90–100, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. K. Shin and S.-H. Lee, “Machinery fault diagnosis using two-channel analysis method based on fictitious system frequency response function,” Shock and Vibration, vol. 2015, Article ID 561238, 7 pages, 2015. View at Publisher · View at Google Scholar
  20. J.-C. Urresty, J.-R. Riba, L. Romeral, and J. A. Ortega, “Mixed resistive unbalance and winding inter-turn faults model of permanent magnet synchronous motors,” Electrical Engineering, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Uddin, M. Kang, D. V. Nguyen, and J.-M. Kim, “Reliable fault classification of induction motors using texture feature extraction and a multiclass support vector machine,” Mathematical Problems in Engineering, vol. 2014, Article ID 814593, 9 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Amarnath and I. R. Praveen Krishna, “Empirical mode decomposition of acoustic signals for diagnosis of faults in gears and rolling element bearings,” IET Science, Measurement and Technology, vol. 6, no. 4, pp. 279–287, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Li and D. He, “Rotational machine health monitoring and fault detection using EMD-based acoustic emission feature quantification,” IEEE Transactions on Instrumentation and Measurement, vol. 61, no. 4, pp. 990–1001, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Qu, D. He, J. Yoon, B. Van Hecke, E. Bechhoefer, and J. Zhu, “Gearbox tooth cut fault diagnostics using acoustic emission and vibration sensors-a comparative,” Sensors, vol. 14, no. 1, pp. 1372–1393, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. D. P. Jena and S. N. Panigrahi, “Automatic gear and bearing fault localization using vibration and acoustic signals,” Applied Acoustics, vol. 98, pp. 20–33, 2015. View at Publisher · View at Google Scholar
  26. I. Bediaga, X. Mendizabal, A. Arnaiz, and J. Munoa, “Ball bearing damage detection using traditional signal processing algorithms,” IEEE Instrumentation and Measurement Magazine, vol. 16, no. 2, pp. 20–25, 2013. View at Publisher · View at Google Scholar · View at Scopus
  27. R. G. Teixeira de Almeida, S. A. da Silva Vicente, and L. Rodrigues Padovese, “New technique for evaluation of global vibration levels in rolling bearings,” Shock and Vibration, vol. 9, no. 4-5, pp. 225–234, 2002. View at Publisher · View at Google Scholar · View at Scopus
  28. A. Soualhi, K. Medjaher, and N. Zerhouni, “Bearing health monitoring based on hilbert-huang transform, support vector machine, and regression,” IEEE Transactions on Instrumentation and Measurement, vol. 64, no. 1, pp. 52–62, 2015. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Amar, I. Gondal, and C. Wilson, “Vibration spectrum imaging: a novel bearing fault classification approach,” IEEE Transactions on Industrial Electronics, vol. 62, no. 1, pp. 494–502, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. E. T. Esfahani, S. Wang, and V. Sundararajan, “Multisensor wireless system for eccentricity and bearing fault detection in induction motors,” IEEE/ASME Transactions on Mechatronics, vol. 19, no. 3, pp. 818–826, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. X. Zhang, J. Kang, L. Xiao, J. Zhao, and H. Teng, “A new improved kurtogram and its application to bearing fault diagnosis,” Shock and Vibration, vol. 2015, Article ID 385412, 22 pages, 2015. View at Publisher · View at Google Scholar
  32. H. Li, H. Zheng, and L. Tang, “Gear fault detection based on teager-huang transform,” International Journal of Rotating Machinery, vol. 2010, Article ID 502064, 9 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. S. Hedayati Kia, H. Henao, and G.-A. Capolino, “Trends in gear fault detection using electrical signature analysis in induction machine-based systems,” in Proceedings of the IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD '15), pp. 297–303, Torino, Italy, March 2015.
  34. J. J. Saucedo-Dorantes, A. G. Garcia-Ramirez, J. C. Jauregui-Correa, R. A. Osornio-Rios, A. Garcia-Perez, and R. J. Romero-Troncoso, “Reliable methodology for gearbox wear monitoring based on vibration analysis,” in Proceedings of the 40th Annual Conference of the IEEE Industrial Electronics Society (IECON '14), pp. 3381–3385, IEEE, Dallas, Tex, USA, October-Novermber 2014. View at Publisher · View at Google Scholar
  35. T. Geramitcioski, L. Trajcevski, I. Vilos, and V. Mitrevski, “Early gear tooth damage diagnostic from the vibration signatures,” in Proceedings of the 3rd International Conference (Power Transmissions '09), Thessaloniki, Greece, 2009.
  36. W. D. Mark, “Time-synchronous-averaging of gear-meshing-vibration transducer responses for elimination of harmonic contributions from the mating gear and the gear pair,” Mechanical Systems and Signal Processing, vol. 62-63, pp. 21–29, 2015. View at Publisher · View at Google Scholar
  37. M. P. Norton and D. G. Karczub, Fundamental of Noise and Vibration Analysis for Engineers, Cambridge University Press, Cambridge, UK, 2nd edition, 2003.
  38. J. C. Jauregui-Correa and O. M. Gonzales, Mechanical Vibrations of Discontinuous Systems, Nova Science, New York, NY, USA, 1st edition, 2009.
  39. J. C. Jauregui-Correa, “The effect of nonlinear traveling waves on rotating machinery,” Mechanical Systems and Signal Processing, vol. 39, no. 1-2, pp. 129–142, 2013. View at Publisher · View at Google Scholar · View at Scopus
  40. J. A. Vite-Frias, R. D. J. Romero-Troncoso, and A. Ordaz-Moreno, “VHDL core for 1024-point radix-4 FFT computation,” in proceedings of the IEEE International Conference on Reconfigurable Computing and FPGAs (RECONFIG '05), Puebla, Mexico, September 2005. View at Publisher · View at Google Scholar · View at Scopus
  41. J. D. J. Rangel-Magdaleno, R. D. J. Romero-Troncoso, R. A. Osornio-Rios, E. Cabal-Yepez, and A. Dominguez-Gonzalez, “FPGA-based vibration analyzer for continuous CNC machinery monitoring with fused FFT-DWT signal processing,” IEEE Transactions on Instrumentation and Measurement, vol. 59, no. 12, pp. 3184–3194, 2010. View at Publisher · View at Google Scholar · View at Scopus