Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 6364205, 9 pages
http://dx.doi.org/10.1155/2016/6364205
Research Article

Investigation on the Behavior of Tensile Damage Evolution in T700/6808 Composite Based on Acoustic Emission Technology

Science & Technology on Reliability & Environmental Engineering Laboratory, Beihang University, Beijing 100191, China

Received 24 March 2016; Revised 16 May 2016; Accepted 24 May 2016

Academic Editor: Samuel da Silva

Copyright © 2016 Weihan Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Y. Liu and D. X. Liu, “Study on mechanical properties of T700/3234 laminate,” Fiber Composites, vol. 1, pp. 16–19, 2013. View at Google Scholar
  2. B. Liu, Y. Yan, Z. X. Qi et al., “Tension property prediction and experiment study of T700 warp knitted fabric composite unidirectional laminates,” in Proceedings of the 17th National Conference on Composite Material, pp. 783–788, Beijing, China, October 2012.
  3. A. Hase, H. Mishina, and M. Wada, “Fundamental study on early detection of seizure in journal bearing by using acoustic emission technique,” Wear, vol. 346-347, pp. 132–139, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. B. C. Dykes, W. T. Hardrath, and D. S. Ulm, “An acoustic emission pre-failure warning system for composite structural tests,” NASA Technical Reports A, vol. 93, pp. 175–181, 1992. View at Google Scholar
  5. H. X. Liu, Study on the damage and fracture of the composite flywheel by the acoustic emission method [M.S. thesis], Wuhan University of Technology, Wuhan, China, 2005.
  6. H. Y. Chou, A. P. Mouritz, M. K. Bannister, and A. R. Bunsell, “Acoustic emission analysis of composite pressure vessels under constant and cyclic pressure,” Composites Part A: Applied Science and Manufacturing, vol. 70, pp. 111–120, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. S. K. Al-Jumaili, K. M. Holford, M. J. Eaton, and R. Pullin, “Parameter Correction Technique (PCT): a novel method for acoustic emission characterisation in large-scale composites,” Composites Part B: Engineering, vol. 75, pp. 336–344, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. E. Maillet, N. Godin, M. R. Mili, P. Reynauda, G. Fantozzia, and J. Lamon, “Real-time evaluation of energy attenuation: a novel approach to acousticemission analysis for damage monitoring of ceramic matrix composite,” Journal of the European Ceramic Society, vol. 34, no. 7, pp. 1673–1679, 2014. View at Publisher · View at Google Scholar
  9. M. Saeedifar, M. Fotouhi, M. Ahmadi Najafabadi, and H. Hosseini Toudeshky, “Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques,” Composite Structures, vol. 124, pp. 120–127, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. L. S. Liu and G. W. Xia, “Technic research of apply acoustic emission in crack detection during composite rotor blades fatigue test,” Heli Tech, vol. 1, pp. 35–38, 2003. View at Google Scholar
  11. S. Masmoudi, A. El Mahi, and R. El Guerjouma, “Mechanical behaviour and health monitoring by acoustic emission of sandwich composite integrated by piezoelectric implant,” Composites Part B: Engineering, vol. 67, pp. 76–83, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Zhou, M. A. Baseer, H. Mahfuz, and S. Jeelani, “Statistical analysis on the fatigue strength distribution of T700 carbon fiber,” Composites Science and Technology, vol. 66, no. 13, pp. 2100–2106, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. G. T. Zhang, W. G. Chen, B. Yang et al., “Testing research on mechanical properties of T700 carbon fiber/epoxy composites,” Fiber Composite, vol. 2, pp. 49–52, 2009. View at Google Scholar
  14. J. Wang, X.-Q. Cheng, J.-K. Zhang, and Z.-N. Li, “Study on tension-tension fatigue properties of T700 composite laminates,” Journal of Aeronautical Materials, vol. 32, no. 3, pp. 85–90, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. L. N. S. Chiu, B. G. Falzon, D. Ruan et al., “Crush responses of composite cylinder under quasi-static and dynamic loading,” Composite Structures, vol. 131, pp. 90–98, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. ASTM, “Standard test method for tensile properties of polymer matrix composite materials,” ASTM D3039/D3039M-14, ASTM International, West Conshohocken, Pa, USA, 2010. View at Google Scholar
  17. P. F. Liu, J. K. Chu, Y. L. Liu, and J. Y. Zheng, “A study on the failure mechanisms of carbon fiber/epoxy composite laminates using acoustic emission,” Materials and Design, vol. 37, pp. 228–235, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. X. Zhuang and X. Yan, “Investigation of damage mechanisms in self-reinforced polyethylene composites by acoustic emission,” Composites Science and Technology, vol. 66, no. 3-4, pp. 444–449, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Barré and M. L. Benzeggagh, “On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropylene,” Composites Science and Technology, vol. 52, no. 3, pp. 369–376, 1994. View at Publisher · View at Google Scholar · View at Scopus