Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 6723605, 18 pages
http://dx.doi.org/10.1155/2016/6723605
Research Article

Fuzzy Multicriteria Model for Selection of Vibration Technology

1Technical School of Industrial Engineering, University of Castilla-La Mancha, Avenida Camilo José Cela, s/n, 13071 Ciudad Real, Spain
2Instituto Superior Técnico, University of Lisbon, Avenida Rovisco Pais 1, 1049-001 Lisbon, Portugal

Received 6 January 2016; Revised 21 March 2016; Accepted 30 March 2016

Academic Editor: Lorenzo Dozio

Copyright © 2016 María Carmen Carnero. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. M. Bari, A. A. Deshpande, and S. S. Patil, “Availability improvement by early detection of motor bearing failure using comprehensive condition monitoring techniques at DTPS,” in Vibration Engineering and Technology of Machinery: Proceedings of VETOMAC X 2014, held at the University of Manchester, UK, September 9–11, 2014, J. K. Sinha, Ed., vol. 23 of Mechanisms and Machine Science, pp. 1101–1111, Springer, Berlin, Germany, 2015. View at Publisher · View at Google Scholar
  2. C. López-Escobar, R. González-Palma, D. Almorza, P. Mayorga, and M. C. Carnero, “Statistical quality control through process self-induced vibration spectrum analysis,” International Journal of Advanced Manufacturing Technology, vol. 58, no. 9–12, pp. 1243–1259, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. R.-E. Precup, P. Angelov, B. S. J. Costa, and M. Sayed-Mouchaweh, “An overview on fault diagnosis and nature-inspired optimal control of industrial process applications,” Computers in Industry, vol. 74, pp. 75–94, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. A. K. S. Jardine, D. Lin, and D. Banjevic, “A review on machinery diagnostics and prognostics implementing condition-based maintenance,” Mechanical Systems and Signal Processing, vol. 20, no. 7, pp. 1483–1510, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. W. G. Lee, J. W. Lee, M. S. Hong, S.-H. Nam, Y. Jeon, and M. G. Lee, “Failure diagnosis system for a ball-screw by using vibration signals,” Shock and Vibration, vol. 2015, Article ID 435870, 9 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. M. C. Carnera, “Selection of diagnostic techniques and instrumentation in a predictive maintenance program. A case study,” Decision Support Systems, vol. 38, no. 4, pp. 539–555, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. Yang, “Automatic condition monitoring of industrial rolling-element bearings using Motor's vibration and current analysis,” Shock and Vibration, vol. 2015, Article ID 486159, 12 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. S. T. Mahmood, Use of vibrations analysis technique in condition based maintenance [Ph.D. thesis], Royal Institute of Technology, Stockholm, Sweden, 2011.
  9. J. Qu, Z. Zhang, and T. Gong, “A novel intelligent method for mechanical fault diagnosis based on dual-tree complex wavelet packet transform and multiple classifier fusion,” Neurocomputing, vol. 171, no. 1, pp. 837–853, 2016. View at Publisher · View at Google Scholar
  10. B. S. J. Costa, P. P. Angelov, and L. A. Guedes, “Fully unsupervised fault detection and identification based on recursive density estimation and self-evolving cloud-based classifier,” Neurocomputing, vol. 150, pp. 289–303, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Yang and H. Liang, “Condition monitoring and fault diagnosis for an antifalling safety device,” Shock and Vibration, vol. 2015, Article ID 286781, 12 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. P. A. Delgado-Arredondo, A. Garcia-Perez, D. Morinigo-Sotelo et al., “Comparative study of time-frequency decomposition techniques for fault detection in induction motors using vibration analysis during startup transient,” Shock and Vibration, vol. 2015, Article ID 708034, 14 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Rosqvist, “Stopping time optimisation in condition monitoring,” Reliability Engineering and System Safety, vol. 76, no. 3, pp. 319–325, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. B. Al-Najjar, “On establishing cost-effective condition-based maintenance: exemplified for vibration-based maintenance in case companies,” Journal of Quality in Maintenance Engineering, vol. 18, no. 4, pp. 401–416, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. I. B. Huang, J. Keisler, and I. Linkov, “Multi-criteria decision analysis in environmental sciences: ten years of applications and trends,” Science of the Total Environment, vol. 409, no. 19, pp. 3578–3594, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Munda, P. Nijkamp, and P. Rietveld, “Qualitative multicriteria evaluation for environmental management,” Ecological Economics, vol. 10, no. 2, pp. 97–112, 1994. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Munda, “‘Measuring sustainability’: a multi-criterion framework,” Environment, Development and Sustainability, vol. 7, no. 1, pp. 117–134, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. M. T. Isaai, A. Kanani, M. Tootoonchi, and H. R. Afzali, “Intelligent timetable evaluation using fuzzy AHP,” Expert Systems with Applications, vol. 38, no. 4, pp. 3718–3723, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Lee, G. Mogi, S. Lee, and J. Kim, “Prioritizing the weights of hydrogen energy technologies in the sector of the hydrogen economy by using a fuzzy AHP approach,” International Journal of Hydrogen Energy, vol. 36, no. 2, pp. 1897–1902, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. F. T. Bozbura, A. Beskese, and C. Kahraman, “Prioritization of human capital measurement indicators using fuzzy AHP,” Expert Systems with Applications, vol. 32, no. 4, pp. 1100–1112, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. M. J. Liberatore and R. L. Nydick, “The analytic hierarchy process in medical and health care decision making: a literature review,” European Journal of Operational Research, vol. 189, no. 1, pp. 194–207, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. C. W. de Silva, “Hardware and software selection for experimental modal analysis,” Shock and Vibration Digest, vol. 16, no. 8, pp. 3–10, 1984. View at Google Scholar · View at Scopus
  23. C. M. Harris and A. G. Piersol, Harris' Shock and Vibration Handbook, McGraw-Hill, New York, NY, USA, 2002.
  24. C. Scheffer and P. Girdhar, Machinery Vibration Analysis & Predictive Maintenance, Elsevier, Oxford, UK, 2004.
  25. A. G. Rehorn, J. Jiang, and P. E. Orban, “State-of-the-art methods and results in tool condition monitoring: a review,” The International Journal of Advanced Manufacturing Technology, vol. 26, no. 7-8, pp. 693–710, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. R. B. Randall, Vibration-Based Condition Monitoring: Industrial, Aerospace and Automotive Applications, John Wiley & Sons, Chichester, UK, 2011. View at Publisher · View at Google Scholar
  27. K. E. Holbert and K. Lin, “Nuclear power plant instrumentation fault detection using fuzzy logic,” Science and Technology of Nuclear Installations, vol. 2012, Article ID 421070, 11 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. Q. Wang and J. Gao, “Research and application of risk and condition based maintenance task optimization technology in an oil transfer station,” Journal of Loss Prevention in the Process Industries, vol. 25, no. 6, pp. 1018–1027, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. J. Ren and M. Lützen, “Fuzzy multi-criteria decision-making method for technology selection for emissions reduction from shipping under uncertainties,” Transportation Research Part D: Transport and Environment, vol. 40, pp. 43–60, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Weigel, M. Fischedick, J. Marzinkowski, and P. Winzer, “Multicriteria analysis of primary steelmaking technologies,” Journal of Cleaner Production, vol. 112, no. 1, pp. 1064–1076, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. D. Štreimikiene, J. Šliogeriene, and Z. Turskis, “Multi-criteria analysis of electricity generation technologies in Lithuania,” Renewable Energy, vol. 85, pp. 148–156, 2016. View at Publisher · View at Google Scholar · View at Scopus
  32. S.-P. Wan, F. Wang, and J.-Y. Dong, “A novel group decision making method with intuitionistic fuzzy preference relations for RFID technology selection,” Applied Soft Computing, vol. 38, pp. 405–422, 2016. View at Publisher · View at Google Scholar · View at Scopus
  33. I. Ivlev, J. Vacek, and P. Kneppo, “Multi-criteria decision analysis for supporting the selection of medical devices under uncertainty,” European Journal of Operational Research, vol. 247, no. 1, pp. 216–228, 2015. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  34. H.-C. Liu, J.-X. You, C. Lu, and Y.-Z. Chen, “Evaluating health-care waste treatment technologies using a hybrid multi-criteria decision making model,” Renewable and Sustainable Energy Reviews, vol. 41, pp. 932–942, 2015. View at Publisher · View at Google Scholar · View at Scopus
  35. M. C. Carnero and J. C. Hidalgo, “Evaluation of condition based maintenance through activity based cost,” Maintenance Journal, vol. 16, pp. 54–61, 2003. View at Google Scholar
  36. M. C. Carnero, “The control of the setting up of a predictive maintenance programme using a system of indicators,” Omega, vol. 32, no. 1, pp. 57–75, 2004. View at Publisher · View at Google Scholar · View at Scopus
  37. M. C. Carnero, “An evaluation system of the setting up of predictive maintenance programmes,” Reliability Engineering & System Safety, vol. 91, no. 8, pp. 945–963, 2006. View at Publisher · View at Google Scholar · View at Scopus
  38. M. C. Carnero, “Model for the selection of predictive maintenance techniques,” INFOR, vol. 45, no. 2, pp. 83–94, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. M. C. Carnero, “Selection of condition monitoring techniques using discrete probability distributions: a case study,” Journal of Risk and Reliability, vol. 223, pp. 99–117, 2009. View at Google Scholar
  40. C. A. Bana e Costa, M. C. Carnero, and M. D. Oliveira, “A multi-criteria model for auditing a Predictive Maintenance Programme,” European Journal of Operational Research, vol. 217, no. 2, pp. 381–393, 2012. View at Publisher · View at Google Scholar · View at Scopus
  41. T. L. Saaty, The Analytic Hierarchy Process, McGraw-Hill, New York, NY, USA, 1980. View at MathSciNet
  42. C.-H. Cheng, “Evaluating naval tactical missile systems by fuzzy AHP based on the grade value of membership function,” European Journal of Operational Research, vol. 96, no. 2, pp. 343–350, 1997. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  43. H.-C. Liu, J.-X. You, X.-Y. You, and M.-M. Shan, “A novel approach for failure mode and effects analysis using combination weighting and fuzzy VIKOR method,” Applied Soft Computing Journal, vol. 28, pp. 579–588, 2015. View at Publisher · View at Google Scholar · View at Scopus
  44. Y.-M. Wang, Y. Luo, and Z. Hua, “On the extent analysis method for fuzzy AHP and its applications,” European Journal of Operational Research, vol. 186, no. 2, pp. 735–747, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  45. K.-J. Zhu, Y. Jing, and D.-Y. Chang, “Discussion on extent analysis method and applications of fuzzy AHP,” European Journal of Operational Research, vol. 116, no. 2, pp. 450–456, 1999. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  46. L. A. Zadeh, “Fuzzy sets,” Information and Computation, vol. 8, pp. 338–353, 1965. View at Google Scholar · View at MathSciNet
  47. U. Cebeci, “Fuzzy AHP-based decision support system for selecting ERP systems in textile industry by using balanced scorecard,” Expert Systems with Applications, vol. 36, no. 5, pp. 8900–8909, 2009. View at Publisher · View at Google Scholar · View at Scopus
  48. D.-Y. Chang, “Applications of the extent analysis method on fuzzy AHP,” European Journal of Operational Research, vol. 95, no. 3, pp. 649–655, 1996. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  49. A. Kaufmann and M. M. Gupta, Fuzzy Mathematical Models in Engineering and Management Science, North-Holland, Amsterdam, The Netherlands, 1988. View at Publisher · View at Google Scholar · View at MathSciNet
  50. O. Meixner, “Fuzzy AHP group decision analysis and its application for the evaluation of energy sources,” in Proceedings of the 10th International Symposium on the Analytic Hierarchy/Network Process, Pittsburgh, Pa, USA, 2009.
  51. F. R. Lima, L. Osiro, and L. C. R. Carpinetti, “A comparison between Fuzzy AHP and Fuzzy TOPSIS methods to supplier selection,” Applied Soft Computing Journal, vol. 21, pp. 194–209, 2014. View at Publisher · View at Google Scholar · View at Scopus
  52. T. L. Saaty, Decision Making with Dependence and Feedback: The Analytic Network Process, RWS Publications, Pittsburgh, Pa, USA, 2001.
  53. G. Daza, Apuntes del Curso Vibraciones Mecánicas, Universidad Técnica Federico Santa María, 2007.
  54. J. Veldman, W. Klingenberg, and H. Wortmann, “Managing conditionbased maintenance technology: a multiple case study in the process industry,” Journal of Quality in Maintenance Engineering, vol. 17, no. 1, pp. 40–62, 2011. View at Publisher · View at Google Scholar · View at Scopus
  55. F. Ballesteros, “Equipos portátiles de medida de vibración para diagnóstico de maquinaria,” Tech. Rep. NT08/2, Preditec-IRM, Zaragoza, Spain, 2014. View at Google Scholar
  56. A. J. M. Goossens and R. J. I. Basten, “Exploring maintenance policy selection using the analytic hierarchy process; an application for naval ships,” Reliability Engineering and System Safety, vol. 142, pp. 31–41, 2015. View at Publisher · View at Google Scholar · View at Scopus
  57. A. Dargi, A. Anjomshoae, M. R. Galankashi, A. Memari, and M. B. M. Tap, “Supplier selection: a fuzzy-ANP approach,” Procedia Computer Science, vol. 31, pp. 691–700, 2014. View at Publisher · View at Google Scholar
  58. J. Lee, H. Cho, and Y. S. Kim, “Assessing business impacts of agility criterion and order allocation strategy in multi-criteria supplier selection,” Expert Systems with Applications, vol. 42, no. 3, pp. 1136–1148, 2015. View at Publisher · View at Google Scholar · View at Scopus
  59. R. Abratt, “Industrial buying in high-tech markets,” Industrial Marketing Management, vol. 15, no. 4, pp. 293–298, 1986. View at Publisher · View at Google Scholar · View at Scopus
  60. R. L. Keeney, Value-Focused Thinking: A Path to Creative Decision Making, Harvard University Press, Cambridge, Mass, USA, 1996.
  61. C. A. Bana e Costa, É. C. Corrêa, J.-M. De Corte, and J.-C. Vansnick, “Facilitating bid evaluation in public call for tenders: a socio-technical approach,” Omega, vol. 30, no. 3, pp. 227–242, 2002. View at Publisher · View at Google Scholar · View at Scopus
  62. C. L. Hwang and K. Yoon, Multiple Attribute Decision Making: Methods and Applications. A State-of-the-Art Survey, vol. 186 of Lecture Notes in Economics and Mathematical Systems, Springer, New York, NY, USA, 1981. View at MathSciNet
  63. C.-T. Chen, “Extensions of the TOPSIS for group decision-making under fuzzy environment,” Fuzzy Sets and Systems, vol. 114, no. 1, pp. 1–9, 2000. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  64. C. Kahraman, S. C. Onar, and B. Oztaysi, “Fuzzy multicriteria decision-making: a literature review,” International Journal of Computational Intelligence Systems, vol. 8, no. 4, pp. 637–666, 2015. View at Publisher · View at Google Scholar · View at Scopus
  65. F. Uysal and Ö. Tosun, “Fuzzy TOPSIS-based computerized maintenance management system selection,” Journal of Manufacturing Technology Management, vol. 23, no. 2, pp. 212–228, 2012. View at Publisher · View at Google Scholar · View at Scopus
  66. Y. O. Ouma, J. Opudo, and S. Nyambenya, “Comparison of fuzzy AHP and fuzzy TOPSIS for road pavement maintenance prioritization: methodological exposition and case study,” Advances in Civil Engineering, vol. 2015, Article ID 140189, 17 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus