Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 7230326, 10 pages
http://dx.doi.org/10.1155/2016/7230326
Research Article

Study on the Characteristics of Traction Forces Difference Asymmetric Steering Bogies

Traction Power State Key Laboratory, Southwest Jiaotong University, Chengdu, China

Received 14 June 2016; Accepted 4 October 2016

Academic Editor: Tai Thai

Copyright © 2016 Yan Shi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Scheffel, “Experience gained by South african railways with diagonally stabilised (CROSS-ANCHOR) bogies having self-steering wheelsets,” in Proceedings of the Heavy Haul Railways Conference, Perth, Western Australia, 1978.
  2. H. A. List and G. Venn-Brown, Design and Development of a Retrofittable Steering Assembly for Australian Conditions, Institution of Engineers, Australia, 1985.
  3. M. Ahmadian and W. Huang, “A qualitative analysis of the dynamics of self-steering locomotive trucks,” Vehicle System Dynamics, vol. 37, no. 2, pp. 85–127, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. R. E. Smith and J. Kalousek, “A design methodology for wheel and rail profiles for use on steered railway vehicles,” Wear, vol. 144, no. 1-2, pp. 329–342, 1991. View at Publisher · View at Google Scholar · View at Scopus
  5. R. M. Goodall, “Control engineering challengs for railway trains of the future,” Measurement and Control, vol. 44, no. 1, pp. 16–24, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. F. Braghin, S. Bruni, and F. Resta, “Active yaw damper for the improvement of railway vehicle stability and curving performances: simulations and experimental results,” Vehicle System Dynamics, vol. 44, no. 11, pp. 857–869, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. N. Miyajima, A. Matsumoto, Y. Suda et al., “Multi-body dynamics simulation and bogie structure evaluation for active-bogie steering truck,” in Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE '07), pp. 459–465, November 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Ciavarella and J. Barber, “Influence of longitudinal creepage and wheel inertia on short-pitch corrugation:a resonance-free mechanism to explain the roaring rail phenomenon,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 222, no. 3, pp. 171–181, 2008. View at Publisher · View at Google Scholar
  9. J. J. Kalker, Three-Dimensional Elastic Bodies in Rolling Contact, vol. 2, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1990. View at Publisher · View at Google Scholar · View at MathSciNet
  10. W. Zhai, J. Gao, P. Liu, and K. Wang, “Reducing rail side wear on heavy-haul railway curves based on wheel–rail dynamic interaction,” Vehicle System Dynamics, vol. 52, no. 1, pp. 440–454, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. O. Polach, “Creep forces in simulations of traction vehicles running on adhesion limit,” Wear, vol. 258, no. 7-8, pp. 992–1000, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Santamaria, E. G. Vadillo, and J. Gomez, “Influence of creep forces on the risk of derailment of railway vehicles,” Vehicle System Dynamics, vol. 47, no. 6, pp. 721–752, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Yamashita, A. Sakamaki, and H. Sugiyama, “Creep force characteristics of wheel/rail contact under friction control,” in Proceedings of the International Mechanical Engineering Congress and Exposition (ASME '11), pp. 375–379, Denver, Colo, USA, November 2011. View at Publisher · View at Google Scholar
  14. A. Schaefer-Enkeler, “Drehgestelle mit radial einstellbaren radsaetzen fuer triebfahrzeuge,” Zeitschrift für Eisenbahnwesen und Verkehrstechnik, vol. 116, pp. 44–48, 1992. View at Google Scholar
  15. S. A. Simson and C. Cole, “Idealized steering for hauling locomotives,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 221, no. 2, pp. 227–236, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. C. P. Ward, P. F. Weston, E. J. C. Stewart et al., “Condition monitoring opportunities using vehicle-based sensors,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 225, no. 2, pp. 202–218, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. R. M. Goodall, “Control for railways—active suspensions and other opportunities,” in Proceedings of the 19th Mediterranean Conference on Control and Automation (MED '11), pp. 639–643, June 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Alonso, J. G. Giménez, and L. M. Martín, “Spin moment calculation and its importance in railway dynamics,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 223, no. 5, pp. 453–460, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. J. J. Kalker, Three-Dimensional Elastic Bodies in Rolling Contact, vol. 2, Springer, Dordrecht, The Netherlands, 1990. View at Publisher · View at Google Scholar · View at MathSciNet
  20. S. Yan-Swjtu, Z. Wu, W. Ma, and L. Zong, “Comparison of curving performance among bogies of different types,” Journal of the Balkan Tribological Association, vol. 22, no. 2, pp. 1175–1183, 2016. View at Google Scholar