Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 7418635, 34 pages
http://dx.doi.org/10.1155/2016/7418635
Review Article

A Review of the Evaluation, Control, and Application Technologies for Drill String Vibrations and Shocks in Oil and Gas Well

1State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China
2College of Oil and Gas Engineering, Southwest Petroleum University, Chengdu 610500, China

Received 15 May 2016; Revised 16 August 2016; Accepted 29 August 2016

Academic Editor: Tai Thai

Copyright © 2016 Guangjian Dong and Ping Chen. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Hu, J. Bao, and B. Hu, “Trend and progress in global oil and gas exploration,” Petroleum Exploration and Development, vol. 40, no. 4, pp. 439–443, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. C. Zou, Z. Yang, G. Zhang et al., “Conventional and unconventional petroleum ‘orderly accumulation’: concept and practical significance,” Petroleum Exploration and Development, vol. 41, no. 1, pp. 14–30, 2014. View at Google Scholar
  3. G. Dong, P. Chen, T. Ma, C. Yang, and C. Ma, “Key technology of deep water top hole drilling and current situation of equipment research and application,” China Petroleum Machinery, vol. 41, no. 6, pp. 49–53, 2013. View at Google Scholar
  4. X. Shi, Z. Yu, and P. Chen, Design and Control Theory of the Sidetrack Horizontal Well and Branch Wellbore Trajectory, Petroleum Industry Press, Beijing, China, 2009.
  5. P. Chen, Y. Liu, and T. Ma, “Status and prospect of multi-well pad drilling technology in shale gas,” Petroleum Drilling Techniques, vol. 42, no. 3, pp. 1–7, 2014. View at Google Scholar
  6. P. Chen, Drilling and Well Completion Engineering, Petroleum Industry Press, Beijing, China, 2nd edition, 2011.
  7. M. W. Dykstra, D. C.-K. Chen, T. M. Warren, and S. A. Zannoni, “Experimental evaluations of drill bit and drill string dynamics,” in Proceedings of the SPE Annual Technical Conference & Exhibition, pp. 319–334, September 1994. View at Scopus
  8. J. D. Macpherson and P. Jogi, “Application and analysis of simultaneous near bit and surface dynamics measurements,” in Proceedings of the IADC/SPE Drilling Conference, SPE-39397-MS, Dallas, Tex, USA, March 1998.
  9. G. Heisig, J. Sancho, and J. D. Macpherson, “Downhole diagnosis of drilling dynamics data provides new level drilling process control to driller,” in Proceedings of the SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, New Orleans, La, USA, September 1998.
  10. S. L. Chen, K. Blackwood, and E. Lamine, “Field investigation of the effects of stick-slip, lateral, and whirl vibrations on roller-cone bit performance,” SPE Drilling and Completion, vol. 17, no. 1, pp. 15–20, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. J. T. Finger, A. J. Mansure, S. D. Knudsen, and R. D. Jacobson, “Development of a system for diagnostic-while-drilling (DWD),” in Proceedings of the SPE/IADC Drilling Conference, Amsterdam, Netherlands, February 2003.
  12. M. E. Cobern and M. E. Wassell, “Laboratory testing of an active drilling vibration monitoring & control system,” in Proceedings of the AADE National Technical Conference & Exhibition, pp. 5–7, Houston, Tex, USA, 2005.
  13. M. Reeves, J. D. MacPherson, R. Zaeper et al., “High speed drill string telemetry network enables new real time drilling and measurement technologies,” in Proceedings of the IADC/SPE Drilling Conference, Society of Petroleum Engineers, Miami, Fla, USA, February 2006.
  14. L. W. Ledgerwood III, J. R. Jain, O. J. Hoffmann, and R. W. Spencer, “Downhole measurement and monitoring lead to an enhanced understanding of drilling vibrations and polycrystalline diamond compact bit damage,” SPE Drilling and Completion, vol. 28, no. 3, pp. 254–262, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Oueslati, A. Hohl, N. Makkar, T. Schwefe, and C. Herbig, “The need for high frequency vibration measurement along with dynamics modeling to understand the genesis of PDC bit damage,” in Proceedings of the IADC/SPE Drilling Conference and Exhibition, Society of Petroleum, Fort Worth, Tex, USA, March 2014.
  16. J. W. Rector III and B. P. Marion, “The use of drill-bit energy as a downhole seismic source,” Geophysics, vol. 56, no. 5, pp. 628–634, 1991. View at Publisher · View at Google Scholar · View at Scopus
  17. R. F. Mitchell and M. B. Allen, “Case studies of BHA vibration failure,” in Proceedings of the SPE Annual Technical Conference and Exhibition, SPE-16675-MS, Dallas, Tex, USA, September 1987.
  18. J. K. Vandlver, J. W. Nicholson, and R.-J. Shyu, “Case studies of the bending vibration and whirling motion of drill collars,” SPE Drilling Engineering, vol. 5, no. 4, pp. 282–290, 1990. View at Publisher · View at Google Scholar · View at Scopus
  19. H. Reckmann, P. Jogi, F. T. Kpetehoto, S. Chandrasekaran, and J. D. Macpherson, “MWD failure rates due to drilling dynamics,” in Proceedings of the IADC/SPE Drilling Conference and Exhibition, pp. 49–58, Society of Petroleum Engineers, New Orleans, La, USA, February 2010. View at Scopus
  20. R. D. Zhu, P. Chen, J. L. Zhou, and X. Li, “The development of a downhole tool used in deep water top hole drilling that can measure pressure and temperature while drilling,” Machinery, vol. 1, no. 1, pp. 93–95, 2012. View at Google Scholar
  21. P. Chen and T. Ma, “Research status of early monitoring technology for deepwater drilling overflow,” Acta Petrolei Sinica, vol. 35, no. 3, pp. 602–612, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. C. Yang, P. Chen, H. Xia, X. Han, and T. Ma, “Progress in research and development of measurement-while-drilling apparatuses,” Natural Gas Industry, vol. 33, no. 2, pp. 71–75, 2013. View at Google Scholar
  23. V. A. Dunayevsky and F. Abbassian, “Application of stability approach to bit dynamics,” SPE Drilling & Completion, vol. 13, no. 2, pp. 99–107, 1998. View at Google Scholar
  24. D. W. Dareing, “Guidelines for controlling drill string vibrations,” Journal of Energy Resources Technology, vol. 106, no. 2, pp. 272–277, 1984. View at Publisher · View at Google Scholar · View at Scopus
  25. Z.-Y. Pan, W.-C. Cui, and X.-C. Zhang, “Overview on VIV of slender marine structures,” Journal of Ship Mechanics, vol. 9, no. 6, pp. 135–154, 2005. View at Google Scholar · View at Scopus
  26. P. A. Patil and C. Teodoriu, “A comparative review of modelling and controlling torsional vibrations and experimentation using laboratory setups,” Journal of Petroleum Science and Engineering, vol. 112, pp. 227–238, 2013. View at Publisher · View at Google Scholar · View at Scopus
  27. X. Zhu, L. Tang, and Q. Yang, “A literature review of approaches for stick-slip vibration suppression in oilwell drillstring,” Advances in Mechanical Engineering, vol. 6, Article ID 967952, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. A. Ghasemloonia, D. Geoff Rideout, and S. D. Butt, “A review of drillstring vibration modeling and suppression methods,” Journal of Petroleum Science and Engineering, vol. 131, pp. 150–164, 2015. View at Publisher · View at Google Scholar · View at Scopus
  29. J. W. Rector III, Utilization of drill-bit vibrations as a downhole seismic source [Ph.D. thesis], Stanford University, 1990.
  30. F. B. Poletto and F. Miranda, Seismic While Drilling: Fundamentals of Drill-Bit Seismic for Exploration, Elsevier, 2004.
  31. A. S. Yigit and A. P. Christoforou, “Stick-slip and bit-bounce interaction in oil-well drillstrings,” Journal of Energy Resources Technology, vol. 128, no. 4, pp. 268–274, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Baumgart, “Stick-slip and bit-bounce of deep-hole drillstrings,” Journal of Energy Resources Technology, vol. 122, no. 2, pp. 78–82, 2000. View at Publisher · View at Google Scholar · View at Scopus
  33. L. A. Sinor, T. M. Warren, and W. K. Armagost, “Development of an anti-whirl core bit,” SPE Drilling & Completion, vol. 10, no. 3, pp. 170–177, 1995. View at Publisher · View at Google Scholar · View at Scopus
  34. W. J. Yucai and G. Zhichuan, “Research on whirling mechanism of bottom drillstring and its rules by inner simulated experiments,” Journal of Guangxi University: Natural Science Edition, vol. 32, no. 2, pp. 126–129, 2007. View at Google Scholar
  35. X. Zhang and Q. Di, “Strength calculation of the whirled drillstring at flexural-torsional alternate stress,” Natural Gas Industry, vol. 24, no. 7, pp. 49–51, 2004. View at Google Scholar · View at Scopus
  36. T. V. Aarrestad and A. Kyllingstad, An Experimental and Theoretical Study of Coupled Boundary Conditions for Vibrations in Drillstrings, Rogaland Research Institute, 1986.
  37. J. K. Al-Thuwaini, M. Emad, H. Hendrazid, W. Mohamed, R. Chafai, and A. D. Murdock, “Combination of unique stabilized Bi-Center bit and Vibration dampening tool improve hole opening performance through interbedded formations in Saudi Arabia,” in Proceedings of the Abu Dhabi International Petroleum Exhibition and Conference, Society of Petroleum Engineers, 2008.
  38. Z. Li, Z. Wang, X. Yang, and X. Tian, “Swirling analysis of drilling strings and anti-whirl stabilizers design,” Oil Drilling & Production Technology, vol. 3, p. 36, 2008. View at Google Scholar
  39. Q. Liu and B. Huang, “Establishment of lateral vibration dynamic model of roller cone rock bit and its solution,” Natural Gas Industry, vol. 21, no. 4, pp. 55–56, 2001. View at Google Scholar · View at Scopus
  40. M. B. Allen, “BHA lateral vibrations: case studies and evaluation of important parameters,” in Proceedings of the SPE/IADC Drilling Conference, Society of Petroleum Engineers, New Orleans, La, USA, March 1987.
  41. G. Heisig and M. Neubert, “Lateral drillstring vibrations in extended-reach wells,” in Proceedings of the IADC/SPE Drilling Conference, Society of Petroleum Engineers, New Orleans, La, USA, Feburary 2000. View at Publisher · View at Google Scholar
  42. Z. Wang, “Effects of the lowing drill fluid on lateral vibration and stability of the drill stem,” China Petroleum Machinery, vol. 18, no. 1, pp. 31–36, 1990. View at Google Scholar
  43. J. Z. Chi, W. Ge, and B. Guo, “Prediction of fatigue life of drillstring under axial-torsional combined vibrations,” in Proceedings of the SPE Gas Technology Symposium, Society of Petroleum Engineers, Calgary, Canada, May 2006.
  44. T. V. Aarrestad, H. A. Tonnesen, and A. Kyllingstad, “Drillstring vibrations: comparison between theory and experiments on a full-scale research drilling rig,” in Proceedings of the SPE/IADC Drilling Conference, Society of Petroleum Engineers, 1986.
  45. J. D. Jansen, L. van den Steen, and E. Zachariasen, “Active damping of torsional drillstring vibrations with a hydraulic top drive,” SPE Drilling & Completion, vol. 10, no. 4, pp. 250–254, 1995. View at Publisher · View at Google Scholar · View at Scopus
  46. R. W. Tucker and C. Wang, “Torsional vibration control and cosserat dynamics of a drill-rig assembly,” Meccanica, vol. 38, no. 1, pp. 143–159, 2003. View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  47. M. Karkoub, Y. L. Abdel-Magid, and B. Balachandran, “Drill-string torsional vibration suppression using GA optimized controllers,” Journal of Canadian Petroleum Technology, vol. 48, no. 12, pp. 32–38, 2009. View at Publisher · View at Google Scholar · View at Scopus
  48. L. Li, Nurzat, and Q. Zhang, “Adaptive PID control strategy for the drilling-rig rotary system,” Acta Petrolei Sinica, vol. 32, no. 1, pp. 158–161, 2011. View at Google Scholar · View at Scopus
  49. K. A. Macdonald and J. V. Bjune, “Failure analysis of drillstrings,” Engineering Failure Analysis, vol. 14, no. 8, pp. 1641–1666, 2007. View at Publisher · View at Google Scholar · View at Scopus
  50. E. N. Sumrall and J. Shamburger, “Modular Data Acquisition for Drilling Operations,” Google Patents, 2013
  51. L. Ge, Z. Hu, and P. Chen, “Design of down-hole engineering parameters measurement while drilling system,” Transducer and Microsystem Technologies, vol. 8, p. 29, 2013. View at Google Scholar
  52. T.-S. Ma and P. Chen, “Development and use of a downhole system for measuring drilling engineering parameters,” Chemistry and Technology of Fuels and Oils, vol. 51, no. 3, pp. 294–307, 2015. View at Publisher · View at Google Scholar · View at Scopus
  53. J. D. Jansen, “Whirl and chaotic motion of stabilized drill collars,” SPE Drilling Engineering, vol. 7, no. 2, pp. 107–114, 1992. View at Publisher · View at Google Scholar · View at Scopus
  54. R. D. Blevins, Flow-Induced Vibration, vol. 1, D. Van Nostrand Reinhold Company, New York, NY, USA, 1977.
  55. C. Feng, The measurement of vortex induced effects in flow past stationary and oscillating circular and d-section cylinders [Retrospective Theses and Dissertations, 1919–2007], University of British Columbia, 1968.
  56. H. M. Blackburn, R. N. Govardhan, and C. H. K. Williamson, “A complementary numerical and physical investigation of vortex-induced vibration,” Journal of Fluids and Structures, vol. 15, no. 3-4, pp. 481–488, 2001. View at Publisher · View at Google Scholar · View at Scopus
  57. P. Teasdale, R. Chafai, D. P. Garcia et al., “BHA modeling coupled with high frequency downhole vibration data provides unique solution to inconsistent drilling performance in South Iraq oilfield development,” in Proceedings of the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, SPE-156445-MS, Society of Petroleum Engineers, Tianjin, China, July 2012. View at Publisher · View at Google Scholar
  58. S. Yigit and A. P. Christoforou, “Active control of stick-slip vibrations: the role of fully coupled dynamics,” in Proceedings of the SPE Middle East Oil Show, SPE-68093-MS, pp. 167–181, Society of Petroleum Engineers, Manama, Bahrain, March 2001. View at Publisher · View at Google Scholar
  59. X. Wu, L. C. Paez, U. T. Partin, and M. Agnihotri, “Decoupling stick/slip and whirl to achieve breakthrough in drilling performance,” in Proceedings of the IADC/SPE Drilling Conference and Exhibition, Society of Petroleum Engineers, 2010.
  60. A. P. Christoforou and A. S. Yigit, “Fully coupled vibrations of actively controlled drillstrings,” Journal of Sound and Vibration, vol. 267, no. 5, pp. 1029–1045, 2003. View at Publisher · View at Google Scholar · View at Scopus
  61. F. H. Deily, W. H. Dareing, G. H. Paff, J. E. Ortloff, and R. D. Lynn, “New drilling-research tool shows what happens down hole,” The Oil and Gas Journal, vol. 492, no. 66, pp. 55–64, 1968. View at Google Scholar
  62. S. Wolf, M. Zacksenhouse, and A. Arian, “Field measurements of downhole drillstring vibrations,” in Proceedings of the SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, Las Vegas, Nev, USA, 1985. View at Publisher · View at Google Scholar
  63. H. Ho, “Method and apparatus for bottom hole measurement,” Google Patents, 1987
  64. D. A. Close, S. C. Owens, and J. D. MacPherson, “Measurement of BHA vibration using MWD,” in Proceedings of the SPE/IADC Drilling Conference, Society of Petroleum Engineers, Feburary 1988. View at Publisher · View at Google Scholar
  65. P. D. Engelder, “Method and apparatus for trelemetry while drilling by changing drill string rotation angle or speed,” Google Patents, 1988
  66. X. Cheng, “Apparatuses and methods for determining temperature data of a component of an earth-boring drilling tool,” Google Patents, 2015
  67. J. Greenberg, “Weatherford sensors track vibration to increase ROP, temperature change for early kick detection,” Drilling Contractor, vol. 64, no. 2, pp. 46–47, 2008. View at Google Scholar
  68. D. Denney, “Distributed-dynamics feasibility study,” Journal of Petroleum Technology, vol. 65, no. 2, pp. 100–107, 2013. View at Publisher · View at Google Scholar
  69. I. Finnie and J. J. Bailey, “An experimental study of drill-string vibration,” Journal of Engineering for Industry, vol. 82, no. 2, pp. 129–135, 1960. View at Publisher · View at Google Scholar
  70. P. R. Paslay and D. B. Bogy, “Drill string vibrations due to intermittent contact of bit teeth,” Journal of Engineering for Industry, vol. 85, no. 2, pp. 187–194, 1963. View at Publisher · View at Google Scholar
  71. K. Millheim and M. C. Apostal, “The effect of bottomhole assembly dynamics on the trajectory of a bit,” Journal of Petroleum Technology, vol. 33, no. 12, pp. 322–338, 1981. View at Google Scholar
  72. D. W. Dareing, “Drill collar length is a major factor in vibration control,” Journal of Petroleum Technology, vol. 36, no. 4, pp. 637–644, 1984. View at Publisher · View at Google Scholar · View at Scopus
  73. E. Kreuzer and M. Steidl, “Controlling torsional vibrations of drill strings via decomposition of traveling waves,” Archive of Applied Mechanics, vol. 82, no. 4, pp. 515–531, 2012. View at Publisher · View at Google Scholar · View at Scopus
  74. X. Zhu and W. Liu, “The effects of drill string impacts on wellbore stability,” Journal of Petroleum Science and Engineering, vol. 109, pp. 217–229, 2013. View at Publisher · View at Google Scholar · View at Scopus
  75. A. Baryshnikov, A. Calderoni, A. Ligrone, and P. Ferrara, “A new approach to the analysis of drillstring fatigue behaviour,” SPE Drilling & Completion, vol. 12, no. 2, pp. 77–84, 1997. View at Publisher · View at Google Scholar · View at Scopus
  76. H. Li and Y. Feng, The Cases Collection of Petroleum Tubular Goods and Equipment Failure Analysis, Petroleum Industry Press, Beijing, China, 2006.
  77. E. Bailey and J. Smith, “The goodman diagram as an analytical tool to optimize fatigue life of rotary shouldered connections,” in Proceedings of the SPE/IADC Drilling Conference, Society of Petroleum Engineers, Feburary 2003. View at Publisher · View at Google Scholar
  78. M. Hossain, M. K. Rahman, S. S. Rahman, F. Akgun, and H. Kinzel, “Fatigue life evaluation: a key to avoid drillpipe failure due to die-marks,” in Proceedings of the IADC/SPE Asia Pacific Drilling Technology, Society of Petroleum Engineers, Jakarta, Indonesia, September 1998.
  79. T. H. Hill, S. E. Ellis, K. Lee, N. M. Reynolds, and N. Zheng, “An innovative design approach to reduce drill string fatigue,” SPE Drilling & Completion, vol. 20, no. 2, pp. 94–100, 2005. View at Publisher · View at Google Scholar · View at Scopus
  80. J. Wu, “Drill-pipe bending and fatigue in rotary drilling of horizontal wells,” in Proceedings of the SPE Eastern Regional Meeting, Society of Petroleum Engineers, Columbus, Ohio, USA, October 1996.
  81. B. S. Wassell, “Method of establishing vibration limits and determining accumulative vibration damage in drilling tools,” in Proceedings of the SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, Florence, Italy, September 2010.
  82. Y. Zang, R. Wang, R. Zhang, and Z. Wang, “A failure analysis of drill string based on fault tree,” Acta Petrolei Sinica, vol. 32, no. 1, pp. 171–176, 2011. View at Publisher · View at Google Scholar · View at Scopus
  83. Y. I. Arevalo and A. J. Fernandes, “Quantification of drillstring-integrity-failure risk using real-time vibration measurements,” SPE Drilling & Completion, vol. 27, no. 2, pp. 216–222, 2012. View at Google Scholar
  84. Y.-J. Park, A. H.-S. Ang, and Y. K. Wen, “Seismic damage analysis of reinforced concrete buildings,” Journal of Structural Engineering, vol. 111, no. 4, pp. 740–757, 1985. View at Publisher · View at Google Scholar · View at Scopus
  85. S. L. Kramer, Geotechnical Earthquake Engineering, Pearson, New Jersey, NJ, USA, 1996.
  86. A. Arias, “A measure of earthquake intensity,” in Seismic Design of Nuclear Power Plants, R. J. Hansen, Ed., Massachusetts Institute of Technology Press, Cambridge, Mass, USA, 1970. View at Google Scholar
  87. B. Maldonado, A. Arrazola, and B. Morton, “Ultradeep HP/HT completions: classification, design methodologies, and technical challenges,” in Proceedings of the Offshore Technology Conference, 2006.
  88. F. Rodney, “Method and apparatus for computing drill bit vibration power spectral density,” Google Patents, 2000
  89. D. K. Ashley, X. M. McNary, and J. C. Tomlinson, “Extending BHA life with multi-axis vibration measurements,” in Proceedings of the SPE/IADC Drilling Conference, pp. 89–99, Society of Petroleum Engineers, Amsterdam, The Netherlands, March 2001. View at Scopus
  90. R. Riddell, “On ground motion intensity indices,” Earthquake Spectra, vol. 23, no. 1, pp. 147–173, 2007. View at Publisher · View at Google Scholar · View at Scopus
  91. G. W. Housner and P. C. Jennings, “Generation of artificial earthquakes,” in Selected Earthquake Engineering Papers of George W. Housner, pp. 438–475, ASCE, 1964. View at Google Scholar
  92. E. L. Wilson, Three Dimensional Static and Dynamic Analysis of Structures: A Physical Approach with Emphasis on Earthquake Engineering, Computers and Structures Inc, 1998.
  93. F. Naeim, The Seismic Design Handbook, Springer, 1989. View at Publisher · View at Google Scholar
  94. D. Denney, “Quantifying drillstring-integrity-failure risk: real-time vibration measurements,” Journal of Petroleum Technology, vol. 64, no. 2, pp. 66–69, 2012. View at Publisher · View at Google Scholar
  95. T. Huang and D. W. Dareing, “Buckling and lateral vibration of drill pipe,” Journal of Engineering for Industry, vol. 90, no. 4, pp. 613–619, 1968. View at Publisher · View at Google Scholar
  96. H. Menand, J. Sellami, J. Akowanou et al., “How drillstring rotation affects critical buckling load?” in Proceedings of the IADC/SPE Drilling Conference, Society of Petroleum Engineers, 2008.
  97. Z. Qu, J. Chen, and S. Liu, “Analysis of the downhole temperature affection on the inherent vibration characteristics of the drillstring containing drill fluid flow,” Journal of Vibration and Shock, vol. 2, pp. 75–78, 1998. View at Google Scholar
  98. H. Oueslati, J. R. Jain, H. Reckmann, L. W. Ledgerwood III, and S. Chandrasekaran, “New insights into drilling dynamics through high-frequency vibration measurement and modeling,” in Proceedings of the SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, New Orleans, La, USA, September-October 2013.
  99. G. Akinniranye, A. Megat, H. Elsweisy, J. Palacio, B. Poedjono, and R. Goobie, “Implementation of a shock and vibration mitigation process: achieving real-time solutions and savings,” SPE Drilling & Completion, vol. 24, no. 2, pp. 301–310, 2009. View at Publisher · View at Google Scholar · View at Scopus
  100. Z. Li, “Fundamental equations and its applications for dynamical analysis of rod and pipe string in oil and gas wells,” Acta Petrolei Sinica, vol. 20, pp. 87–90, 1999. View at Google Scholar
  101. J. R. Bailey and S. M. Remmert, “Managing drilling vibrations through BHA design optimization,” SPE Drilling & Completion, vol. 25, no. 4, pp. 458–471, 2010. View at Publisher · View at Google Scholar · View at Scopus
  102. M. Burgess, G. L. McDaniel, and P. K. Das, “Improving BHA tool reliability with drillstring vibration models: field experience and limitations,” in Proceedings of the SPE/IADC Drilling Conference, Society of Petroleum Engineers, New Orleans, La, USA, March 1987.
  103. E. Skaugen, “The effects of quasi-random drill bit vibrations upon drillstring dynamic behavior,” in Proceedings of the SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, Dallas, Tex, USA, September 1987.
  104. P. Defourny and F. Abbassian, “Flexible bit: a new anti-vibration PDC bit concept,” SPE Drilling & Completion, vol. 13, no. 4, pp. 237–242, 1998. View at Google Scholar
  105. S. C. Johnson, “A new method of producing laterally stable PDC drill bits,” SPE Drilling & Completion, vol. 23, no. 3, pp. 314–324, 2008. View at Publisher · View at Google Scholar · View at Scopus
  106. S. P. Barton, H. S. May, and S. Johnson, “Gauge, cutting structure, torque control components—what really counts for optimal tool face control with FC drill bits?” SPE Drilling & Completion, vol. 24, no. 2, pp. 293–300, 2009. View at Publisher · View at Google Scholar · View at Scopus
  107. R. Pessier and M. Damschen, “Hybrid bits offer distinct advantages in selected roller-cone and PDC-bit applications,” SPE Drilling & Completion, vol. 26, no. 1, pp. 96–103, 2011. View at Publisher · View at Google Scholar · View at Scopus
  108. G. Pelfrene, H. Sellami, and L. Gerbaud, “Mitigating stick-slip in deep drilling based on optimization of PDC bit design,” in Proceedings of the SPE/IADC Drilling Conference and Exhibition, pp. 332–343, Society of Petroleum Engineers, March 2011. View at Scopus
  109. T. Schwefe, L. W. Ledgerwood III, J. R. Jain, D. M. Fuselier, H. Oueslati, and L. Endres, “Development and testing of stick/slip-resistant PDC Bits,” in Proceedings of the IADC/SPE Drilling Conference and Exhibition, Society of Petroleum Engineers, Fort Worth, Tex, USA, March 2014. View at Publisher · View at Google Scholar
  110. T. Schwefe, L. W. Ledgerwood III, J. R. Jain, D. M. Fuselier, H. Oueslati, and L. Endres, “Development and testing of stick/slip-resistant PDC bits,” in Proceedings of the SPE/IADC Drilling Conference and Exhibition, pp. 974–984, March 2014. View at Scopus
  111. S. F. Sowers, F. E. Dupriest, J. R. Bailey, and L. Wang, “Use of roller reamers improves drilling performance in wells limited by bit and bottomhole assembly vibrations,” in Proceedings of the SPE/IADC Drilling Conference and Exhibition, Society of Petroleum Engineers, 2009.
  112. S. R. Radford, M. A. Jenkins, and T. Li, “Novel concentric expandable stabilizer results in increased penetration rates and drilling efficiency with reduced vibration,” in Proceedings of the SPE/IADC Drilling Conference and Exhibition, Society of Petroleum Engineers, Amsterdam, The Netherlands, March 2009.
  113. J. P. Mccarthy, A. A. Kabbara, T. Burnett, and I. Forster, “Careful planning and application of an asymmetric vibration damping tool dramatically improves underreaming while drilling performance in deepwater drilling,” in Proceedings of the SPE Deepwater Drilling and Completions Conference, Society of Petroleum Engineers, 2012.
  114. P. C. Bates, C. Bouziane, D. Nicholl et al., “Anti-vibration sub allows high signal-to-noise ratio and improved borehole quality,” in Proceedings of the SPE Offshore Europe Conference and Exhibition (OE '13), pp. 34–47, Society of Petroleum Engineers, September 2013. View at Scopus
  115. F. Clayer, J. K. Vandiver, and H. Y. Lee, “The effect of surface and downhole boundary conditions on the vibration of drillstrings,” in Proceedings of the SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, 1990.
  116. K. S. Seines, C. Clemmensen, and N. Reimers, “Drilling difficult formations efficiently with the use of an antistall tool,” SPE Drilling & Completion, vol. 24, no. 4, pp. 531–536, 2009. View at Publisher · View at Google Scholar · View at Scopus
  117. N. Reimers, “Antistall tool reduces risk in drilling difficult formations,” Journal of Petroleum Technology, vol. 64, no. 1, pp. 26–29, 2012. View at Publisher · View at Google Scholar
  118. A. Serrarens, M. Van de Molengraft, J. J. Kok, and L. Van den Steen, “H control for suppressing stick-slip in oil well drillstrings,” IEEE Control Systems, vol. 18, no. 2, pp. 19–30, 1998. View at Google Scholar
  119. E. M. Navarro-López and R. Suárez, “Practical approach to modelling and controlling stick-slip oscillations in oilwell drillstrings,” in Proceedings of the IEEE International Conference on Control Applications, pp. 1454–1460, September 2004. View at Scopus
  120. C. Canudas-de-Wit, M. A. Corchero, F. R. Rubio, and E. Navarro-López, “D-OSKIL: a new mechanism for suppressing stick-slip in oil well drillstrings,” in Proceedings of the 44th IEEE Conference on Decision and Control and the European Control Conference (CDC-ECC '05), pp. 8260–8265, IEEE, Seville, Spain, December 2005. View at Publisher · View at Google Scholar · View at Scopus
  121. H. Puebla and J. Alvarez-Ramirez, “Suppression of stick-slip in drillstrings: a control approach based on modeling error compensation,” Journal of Sound and Vibration, vol. 310, no. 4-5, pp. 881–901, 2008. View at Publisher · View at Google Scholar · View at Scopus
  122. F. A. Majeed, H. Karki, M. Karkoub, and Y. L. A. Magid, “Experimental verification of drill string vibration suppression using an adaptive self-tuning controller,” International Journal of Acoustics and Vibrations, vol. 18, no. 1, pp. 20–26, 2013. View at Google Scholar · View at Scopus
  123. S. A. Al-Hiddabi, B. Samanta, and A. Seibi, “Non-linear control of torsional and bending vibrations of oilwell drillstrings,” Journal of Sound and Vibration, vol. 265, no. 2, pp. 401–415, 2003. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  124. F. Abdulgalil and H. Siguerdidjane, “PID based on sliding mode control for rotary drilling system,” in Proceedings of the International Conference on Computer as a Tool (EUROCON '05), pp. 262–265, November 2005. View at Scopus
  125. D. Pavković, J. Deur, and A. Lisac, “A torque estimator-based control strategy for oil-well drill-string torsional vibrations active damping including an auto-tuning algorithm,” Control Engineering Practice, vol. 19, no. 8, pp. 836–850, 2011. View at Publisher · View at Google Scholar · View at Scopus
  126. J. Deur, T. Koledić, and N. Perić, “Optimization of speed control system for electric drives with elastic coupling,” in Proceedings of the IEEE International Conference on Control Applications, pp. 319–325, IEEE, Trieste, Italy, September 1998.
  127. M. M. Sarker, D. G. Rideout, and S. D. Butt, “Advantages of an lqr controller for stick-slip and bit-bounce mitigation in an oilwell drillstring,” in Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE '12), pp. 1305–1313, American Society of Mechanical Engineers, November 2012. View at Publisher · View at Google Scholar · View at Scopus
  128. B. Saldivar and S. Mondié, “Drilling vibration reduction via attractive ellipsoid method,” Journal of the Franklin Institute, vol. 350, no. 3, pp. 485–502, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  129. K. Javanmardi and D. T. Gaspard, “Application of soft-torque rotary table in mobile bay,” in Proceedings of the SPE/IADC Drilling Conference, pp. 645–650, Society of Petroleum Engineers, New Orleans, La, USA, February 1992. View at Scopus
  130. M. E. Wassell, M. E. Cobern, V. Saheta, A. Purwanto, and M. Cepeda, “Active vibration damper improves performance and reduces drilling costs,” World Oil, vol. 229, no. 9, pp. 109–111, 2008. View at Google Scholar · View at Scopus
  131. M. Hutchinson, “Automated downhole vibration damping,” in Proceedings of the SPE/IADC Middle East Drilling Technology Conference & Exhibition, Society of Petroleum Engineers, Dubai, UAE, October 2013.
  132. M. Hutchinson, D. Burgess, F. Thompson, and A. Kopfstein, Self-Adapting Bottom Hole Assembly Vibration Suppression, Society of Petroleum Engineers, 2013.
  133. S. Hu, The Principle of Automatic Control, Science Press, Beijing, China, 5th edition, 2007.
  134. G. Lin, T. Zhu, and B. Lin, “Similarity technique for dynamic structural model test,” Journal of Dalian University of Technology, vol. 40, pp. 1–8, 2000. View at Google Scholar
  135. X. P. Do and S.-B. Choi, “High loaded mounts for vibration control using magnetorheological fluids: review of design configuration,” Shock and Vibration, vol. 2015, Article ID 915859, 18 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  136. E. Harpst and E. E. Davis, “Rotary percussion drilling,” Oil and Gas Journal, vol. 11, no. 1, pp. 10–15, 1949. View at Google Scholar
  137. A. Pratt, “Modifications to and experience with percussion air drilling,” in Proceedings of the SPE/IADC Drilling Conference, pp. 15–18, New Orleans, La, USA, March 1987.
  138. Y. Melamed, A. Kiselev, M. Gelfgat, D. Dreesen, and J. Blacic, “Hydraulic hammer drilling technology: developments and capabilities,” Journal of Energy Resources Technology, vol. 122, no. 1, pp. 1–7, 2000. View at Publisher · View at Google Scholar
  139. H. F. Downs, Application and Evaluation of Air-Hammer Drilling in the Permian Basin. Drilling and Production Practice, American Petroleum Institute, Washington, DC, USA, 1960.
  140. C. A. Pratt, “Modifications to and experience with air-percussion drilling,” SPE Drilling Engineering, vol. 4, no. 4, pp. 315–320, 1989. View at Publisher · View at Google Scholar · View at Scopus
  141. M. C. Whiteley and W. P. England, “Air drilling operations improved by percussion bit/hammer tool tandem,” in Proceedings of the SPE/IADC Drilling Conference, Society of Petroleum Engineers, 1985.
  142. R. P. Johns, C. Witt, and M. Frederick, “Hammer bits control deviation in crooked hole country,” in Proceedings of the SPE/IADC Drilling Conference, pp. 341–18659, Society of Petroleum Engineers, New Orleans, La, USA, March 1989. View at Scopus
  143. C. H. Reinsvold, J. Clement, M. Oliver, C. Witt, and J. Crockett, “Diamond-enhanced hammer bits reduce cost per foot in the Arkoma and Appalachian basins,” in Proceedings of the SPE/IADC Drilling Conference, Society of Petroleum Engineers, Febeuary-March 1988.
  144. J. Meyers and M. Sagan, “Air hammers cut Barnett Shale drilling time in half,” World Oil, vol. 225, no. 9, pp. 71–72, 2004. View at Google Scholar · View at Scopus
  145. P. Vieira, C. Lagrandeur, and K. Sheets, “Hammer drilling technology—the proved solution to drill hard rock formations in the Middle East,” in Proceedings of the SPE Middle East Oil and Gas Show and Conference, Society of Petroleum Engineers, Manama, Bahrain, September 2011. View at Publisher · View at Google Scholar
  146. R. Wedel, S. Mathison, G. Hightower, and C. Staley, “Mitigating bit related stick slip with a torsional impact hammer,” in Proceedings of the AADE National Technical Conference and Exhibition, 2011.
  147. H. Gao, J. Qu, and P. Zeng, “Research and practice to improve drilling speed in Yuanba Area,” Petroleum Drilling Techniques, vol. 38, no. 4, pp. 26–29, 2010. View at Google Scholar
  148. Q. Sun, Y. Zhang, S. Li, and X. Wang, “Application of bit torsional impact generator in well Yuanba 10,” Petroleum Drilling Techniques, vol. 38, no. 6, pp. 84–87, 2010. View at Google Scholar
  149. X.-H. Zhu, L.-P. Tang, and H. Tong, “Rock breaking mechanism of a high frequency torsional impact drilling,” Journal of Vibration and Shock, vol. 31, no. 20, pp. 75–109, 2012. View at Google Scholar · View at Scopus
  150. C. A. Deen, R. J. Wedel, A. Nayan, S. K. Mathison, and G. Hightower, “Application of a torsional impact hammer to improve drilling efficiency,” in Proceedings of the SPE Annual Technical Conference and Exhibition (ATCE '11), pp. 3740–3750, Denver, Colo, USA, November 2011. View at Scopus
  151. P. Ge, Q. Ma, and M. Guo, “Application of air hammer drilling technology in continental well in Yuanba Block,” China Petroleum Machinery, vol. 8, 2013. View at Google Scholar
  152. Y. Kong and J. Zhang, “Air hammer used in puguang gas field,” Chinese Journal of Engineering Geophysics, vol. 5, no. 2, pp. 237–241, 2008. View at Google Scholar
  153. Z. Guan, H. Zhang, W. Zhang, Y. Liu, and D. Liang, “Equipment and technique for improving penetration rate by the transformation of drill string vibration to hydraulic pulsating jet,” Petroleum Exploration and Development, vol. 41, no. 5, pp. 678–683, 2014. View at Publisher · View at Google Scholar · View at Scopus
  154. W. Li, T. Yan, S. Li, and X. Zhang, “Rock fragmentation mechanisms and an experimental study of drilling tools during high-frequency harmonic vibration,” Petroleum Science, vol. 10, no. 2, pp. 205–211, 2013. View at Publisher · View at Google Scholar · View at Scopus
  155. S. Q. Li, T. Yan, W. Li, and F. Q. Bi, “Modeling of vibration response of rock by harmonic impact,” Journal of Natural Gas Science and Engineering, vol. 23, pp. 90–96, 2015. View at Publisher · View at Google Scholar · View at Scopus
  156. M. Haftani, B. Bohloli, A. Nouri, M. R. M. Javan, M. Moosavi, and M. Moradi, “Influence of penetration rate and indenter diameter in strength measurement by indentation testing on small rock specimens,” Rock Mechanics and Rock Engineering, vol. 48, no. 2, pp. 527–534, 2015. View at Publisher · View at Google Scholar · View at Scopus
  157. G. J. Dong, P. Chen, and T. S. Ma, “Indentation fragmentation mechanism of anisotropy shale under dynamic and static loads,” in Rock Dynamics: From Research to Engineering: Proceedings of the 2nd International Conference on Rock Dynamics and Applications, J. Zhao, Ed., chapter 38, pp. 283–288, CRC Press, 2016. View at Publisher · View at Google Scholar
  158. Q. Han, P. Chen, and T. Ma, “Influencing factor analysis of shale micro-indentation measurement,” Journal of Natural Gas Science and Engineering, vol. 27, pp. 641–650, 2015. View at Publisher · View at Google Scholar · View at Scopus
  159. P. Chen, Q. Han, T. Ma, and D. Lin, “The mechanical properties of shale based on micro-indentation test,” Petroleum Exploration and Development, vol. 42, no. 5, pp. 723–732, 2015. View at Publisher · View at Google Scholar · View at Scopus
  160. T. O. Stagg and R. H. Reiley, “Watchdog: an anti-collision wellhead monitoring system,” in Proceedings of the International Arctic Technology Conference, Society of Petroleum Engineers, Anchorage, Alaska, USA, May 1991.
  161. G. Liu, Q. Yang, Z. Dong, B. He, and Z. Geng, “A drill bit vibration anti-collision monitoring system and field experiment,” Natural Gas Industry, vol. 33, no. 6, pp. 66–70, 2013. View at Publisher · View at Google Scholar · View at Scopus
  162. Google Patents, “Method of making sub-surface determinations,” 1936
  163. B. A. Hardage, “Vertical seismic profiling, part A: principles,” in Handbook of Geophysical Exploration, K. Helbig and S. Treitel, Eds., Geophysical Press, London, UK, 1983. View at Google Scholar
  164. B. Sun, A. Bóna, B. Zhou, A. King, C. Dupuis, and A. Kepic, “Drill-rig noise suppression using the Karhunen-Loéve transform for seismic-while-drilling experiment at Brukunga, South Australia,” Exploration Geophysics, vol. 47, no. 1, pp. 44–57, 2015. View at Publisher · View at Google Scholar
  165. J. W. Rector III and B. A. Hardage, “Radiation pattern and seismic waves generated by a working roller-cone drill bit,” Geophysics, vol. 57, no. 10, pp. 1319–1333, 1992. View at Publisher · View at Google Scholar · View at Scopus
  166. C. Naville, S. Serbutoviez, A. Throo, O. Vincké, and F. Cecconi, “Seismic While Drilling (SWD) techniques with downhole measurements, introduced by IFP and its partners in 1990–2000,” Oil & Gas Science and Technology, vol. 59, no. 4, pp. 371–403, 2004. View at Publisher · View at Google Scholar · View at Scopus
  167. A. Anchliya, “A review of seismic while drilling (SWD) techniques: a journey from 1986 to 2005,” in Proceedings of the SPE Europec/EAGE Annual Conference and Exhibition, Society of Petroleum Engineers, 2006.
  168. B. Hardage, “Seismic-while-drilling: techniques using the drill bit as the seismic source,” AAPG Explorer, 2009. View at Google Scholar
  169. F. Poletto, “Energy balance of a drill-bit seismic source, part 2: drill-bit versus conventional seismic sources,” Geophysics, vol. 70, no. 2, pp. T29–T44, 2005. View at Publisher · View at Google Scholar · View at Scopus
  170. R. L. Kirlin and W. J. Done, Covariance Analysis for Seismic Signal Processing, SEG Books, 1999.
  171. H. C. Vennin, “Drilling bits optimized for the Paris basin,” Oil and Gas Journal, vol. 87, no. 31, 1989. View at Google Scholar
  172. F. Poletto, F. Miranda, P. Corubolo, and F. Abramo, “Seismic while drilling using PDC signals—Seisbit® experience and perspectives,” in Proceedings of the in 59th EAGE Conference & Exhibition, Geneva, Switzerland, May 1997.
  173. M. Malusa, F. Poletto, and F. Miranda, “SWD using lateral vibrations of PDC bits,” in Proceedings of the SEG Annual Meeting, Society of Exploration Geophysicists, Dallas, Tex, USA, October 2003.
  174. J. J. Kolle and K. Theimer, “Seismic-while-drilling using a swept impulse source,” in Proceedings of the SPE/IADC Drilling Conference, Society of Petroleum Engineers, Amsterdam, The Netherlands, February 2005.
  175. M. Malusa, F. Poletto, and F. Miranda, “Prediction ahead of the bit by using drill-bit pilot signals and reverse vertical seismic profiling (RVSP),” Geophysics, vol. 67, no. 4, pp. 1169–1176, 2002. View at Publisher · View at Google Scholar · View at Scopus
  176. J. B. U. Haldorsen, D. E. Miller, and J. J. Walsh, “Walk-away VSP using drill noise as a source,” Geophysics, vol. 60, no. 4, pp. 978–997, 1995. View at Publisher · View at Google Scholar · View at Scopus
  177. I. Vasconcelos and R. Snieder, “Interferometry by deconvolution: part 2—theory for elastic waves and application to drill-bit seismic imaging,” Geophysics, vol. 73, no. 3, pp. S129–S141, 2008. View at Publisher · View at Google Scholar · View at Scopus
  178. I. Vasconcelos and R. Snieder, “Interferometry by deconvolution, Part 1—theory for acoustic waves and numerical examples,” Geophysics, vol. 73, no. 3, pp. S115–S128, 2008. View at Publisher · View at Google Scholar · View at Scopus
  179. K. M. Al-Yahya, “Application of the partial Karhunen-Loève transform to suppress random noise in seismic sections,” Geophysical Prospecting, vol. 39, no. 1, pp. 77–93, 1991. View at Publisher · View at Google Scholar · View at Scopus
  180. R. Montagne and G. L. Vasconcelos, “Optimized suppression of coherent noise from seismic data using the Karhunen-Loève transform,” Physical Review E, vol. 74, no. 1, Article ID 16213, 2006. View at Publisher · View at Google Scholar · View at Scopus
  181. K. Wapenaar and J. Fokkema, “Green's function representations for seismic interferometry,” Geophysics, vol. 71, no. 4, pp. SI33–SI46, 2006. View at Publisher · View at Google Scholar · View at Scopus
  182. J. Garnier and G. Papanicolaou, “Passive sensor imaging using cross correlations of noisy signals in a scattering medium,” SIAM Journal on Imaging Sciences, vol. 2, no. 2, pp. 396–437, 2009. View at Publisher · View at Google Scholar · View at MathSciNet
  183. F. Poletto, M. Malusa, F. Miranda, and U. Tinivella, “Seismic-while-drilling by using dual sensors in drill strings,” Geophysics, vol. 69, no. 5, pp. 1261–1271, 2004. View at Publisher · View at Google Scholar · View at Scopus
  184. B. Cornish and R. Deady, “Multi-sensor seismic-while-drilling,” in Proceedings of the SPWLA 47th Annual Logging Symposium, Society of Petrophysicists and Well-Log Analysts, Veracruz, Mexico, June 2006.
  185. A. Alali and S. P. Barton, “Unique axial oscillation tool enhances performance of directional tools in extended reach applications,” in Proceedings of the Brasil Offshore, Society of Petroleum Engineers, Macaé, Brazil, June 2011.
  186. R. Gee, I. Forster, J. R. Clausen, J. Prill, and A. E. Schen, “Drilling with induced vibrations improves ROP and mitigates stick/slip in vertical and directional wells,” in Proceedings of the IADC/SPE Drilling Conference and Exhibition, Society of Petroleum Engineers, 2014.
  187. B. Li, “Development and pilot test of hydro-oscillator,” Petroleum Drilling Techniques, vol. 42, no. 1, pp. 111–113, 2014. View at Google Scholar
  188. Y. Liu, P. Chen, X. Wang, and T. Ma, “Modeling friction-reducing performance of an axial oscillation tool using dynamic friction model,” Journal of Natural Gas Science and Engineering, vol. 33, pp. 397–404, 2016. View at Publisher · View at Google Scholar
  189. P. R. Dahl, “Solid friction damping of mechanical vibrations,” AIAA Journal, vol. 14, no. 12, pp. 1675–1682, 1976. View at Publisher · View at Google Scholar · View at Scopus
  190. P. A. Bliman, “Mathematical study of the Dahl's friction model,” European Journal of Mechanics A: Solids, vol. 11, no. 6, pp. 835–848, 1992. View at Google Scholar
  191. L. Skyles, Y. Amiraslani, and J. Wilhoit, “Converting static friction to kinetic friction to drill further and faster in directional holes,” in Proceedings of the IADC/SPE Drilling Conference and Exhibition, Society of Petroleum Engineers, San Diego, Calif, USA, March 2012.
  192. R. Gee, C. Hanley, R. Hussain, L. Canuel, and J. Martinez, “Axial oscillation tools vs. lateral vibration tools for friction reduction—what's the best way to shake the pipe?” in Proceedings of the SPE/IADC Drilling Conference and Exhibition, Society of Petroleum Engineers, London, UK, March 2015.