Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016 (2016), Article ID 7974090, 23 pages
http://dx.doi.org/10.1155/2016/7974090
Research Article

Shaking Table Tests on Earthquake Response Characterization of a Complex Museum Isolated Structure in High Intensity Area

1Department of Civil Engineering, Shanghai University, Shanghai 200072, China
2College of Civil Engineering, Tongji University, Shanghai 200092, China
3Shanghai Baoye Group Co., Ltd., Shanghai 200941, China

Received 21 March 2016; Revised 17 June 2016; Accepted 6 November 2016

Academic Editor: Francesco Franco

Copyright © 2016 Wenguang Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Sasaki, E. Sato, K. L. Ryan, T. Okazaki, S. A. Mahin, and K. Kajiwara, “NEES/E-defense base-isolation tests: effectiveness of friction pendulum and lead-rubber bearing systems,” in Proceedings of the 15th World Conference of Earthquake Engineering, 2012.
  2. Y. Liu, W.-G. Liu, X. Wang, W.-F. He, and Q.-R. Yang, “New equivalent linear impact model for simulation of seismic isolated structure pounding against moat wall,” Shock and Vibration, vol. 2014, Article ID 151237, 10 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Nagarajaiah and S. Xiaohong, “Response of base-isolated usc hospital building in northridge earthquake,” Journal of Structural Engineering, vol. 126, no. 10, pp. 1177–1186, 2000. View at Publisher · View at Google Scholar
  4. F. Naeim and J. M. Kelly, Design of Seismic Isolated Structures: From Theory to Practice, John Wiley & Sons, New York, NY, USA, 1999.
  5. J. P. Stewart, J. P. Conte, and I. D. Aiken, “Observed behavior of seismically isolated buildings,” Journal of Structural Engineering, vol. 125, no. 9, pp. 955–964, 1999. View at Publisher · View at Google Scholar · View at Scopus
  6. E. G. Fischer and T. P. Fischer, “Quasi-resonance effects observed in the 1994 Northridge earthquake, and others,” Shock and Vibration, vol. 5, no. 3, pp. 153–158, 1998. View at Publisher · View at Google Scholar · View at Scopus
  7. W. H. Robinson, “Recent research and applications of seismic isolation in New Zealand,” Bulletin of the New Zealand National Society for Earthquake Engineering, vol. 28, no. 4, pp. 253–264, 1995. View at Google Scholar · View at Scopus
  8. B. Myslimaj, S. Gamble, D. Chin-Quee, A. Davies, and B. Breukelman, “Base isolation technologies for seismic protection of museum artifacts,” in Proceedings of the IAMFA Annual Conference, pp. 21–24, San Francisco, Calif, USA, 2003.
  9. X. Lu, G. Fu, W. Shi, and W. Lu, “Shake table model testing and its application,” The Structural Design of Tall and Special Buildings, vol. 17, no. 1, pp. 181–201, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Lu and X. Wu, “Study on a new shear wall system with shaking table test and finite element analysis,” Earthquake Engineering and Structural Dynamics, vol. 29, no. 10, pp. 1425–1440, 2000. View at Google Scholar · View at Scopus
  11. P. Roussis, E. Pavlou, and E. Pisiara, “Base-isolation technology for earthquake protection of art objects,” in Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, 2008.
  12. S. Sorace and G. Terenzi, “Seismic performance assessment and base-isolated floor protection of statues exhibited in museum halls,” Bulletin of Earthquake Engineering, vol. 13, no. 6, pp. 1873–1892, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Iiba, M. Midorikawa, H. Yamanouchi, S. Yamaguchi, Y. Ohashi, and M. Takayama, “Shaking table tests on performance of isolators for houses subjected to three-dimensional earthquake motions,” in Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand, 2000.
  14. X. Lu, Y. Zhu, W. Shi, S. Ueda, D. Feng, and T. Miyama, “Shaking table test on building models with combined isolation system,” China Civil Engineering Journal, vol. 34, pp. 43–49, 2001. View at Google Scholar
  15. B. Yoo and Y.-H. Kim, “Study on effects of damping in laminated rubber bearings on seismic responses for a 1/8 scale isolated test structure,” Earthquake Engineering & Structural Dynamics, vol. 31, no. 10, pp. 1777–1792, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Dolce, D. Cardone, F. C. Ponzo, and C. Valente, “Shaking table tests on reinforced concrete frames without and with passive control systems,” Earthquake Engineering and Structural Dynamics, vol. 34, no. 14, pp. 1687–1717, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Dolce, D. Cardone, and F. C. Ponzo, “Shaking-table tests on reinforced concrete frames with different isolation systems,” Earthquake Engineering and Structural Dynamics, vol. 36, no. 5, pp. 573–596, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. T. A. Rawlinson, J. D. Marshall, K. L. Ryan, and H. Zargar, “Development and experimental evaluation of a passive gap damper device to prevent pounding in base-isolated structures,” Earthquake Engineering and Structural Dynamics, vol. 44, no. 11, pp. 1661–1675, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. E. Takaoka, Y. Takenaka, and A. Nimura, “Shaking table test and analysis method on ultimate behavior of slender base-isolated structure supported by laminated rubber bearings,” Earthquake Engineering and Structural Dynamics, vol. 40, no. 5, pp. 551–570, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Kikuchi, M. Saruta, K. Tamura, J. M. Kelly, L. D. Aiken, and P. W. Clark, “Earthquake simulator test of a base-isolated reinforced concrete building,” Journal of Structural & Construction Engineering, pp. 69–78, 1994. View at Google Scholar
  21. J.-S. Hwang and T.-Y. Hsu, “Experimental study of isolated building under triaxial ground excitations,” Journal of Structural Engineering, vol. 126, no. 8, pp. 879–886, 2000. View at Publisher · View at Google Scholar · View at Scopus
  22. N. Lakshmanan, K. S. Kumar, R. Sreekala, K. Muthumani, J. Guru, and N. Gopalakrishnan, “Experimental investigations on the seismic response of a base-isolated reinforced concrete frame model,” Journal of Performance of Constructed Facilities, vol. 22, no. 5, pp. 289–296, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. W.-J. Chung, C.-B. Yun, N.-S. Kim, and J.-W. Seo, “Shaking table and pseudodynamic tests for the evaluation of the seismic performance of base-isolated structures,” Engineering Structures, vol. 21, no. 4, pp. 365–379, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Miyama and K. Masuda, “Shaking table tests on base-isolated buildings having high aspect ratios: the tensile force on the rubber bearing and the subsequent setting vibration,” Journal of Structural and Construction Engineering, vol. 573, pp. 61–68, 2003. View at Google Scholar
  25. W. F. He, W. G. Liu, Q. R. Yang, and C. Qin, “Study on dynamic response of large and small aspect ratio isolated buildings,” The Structural Design of Tall and Special Buildings, vol. 23, no. 17, pp. 1329–1344, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Kasai, Y. Ooki, S. Motoyui, T. Takeuchi, and E. Sato, “E-defense tests on full-scale steel buildings: part 1—experiments using dampers and isolators,” in Proceedings of the ASCE Structures Congress, pp. 16–19, Long Beach, Calif, USA, May 2007.
  27. K. L. Ryan, N. D. Dao, E. Sato, T. Sasaki, and T. Okazaki, “Aspects of isolation device behavior observed from full-scale testing of an isolated building at E-Defense,” in Proceedings of the Structures Congress, pp. 25–36, 2012.
  28. S.-H. Oh, S.-H. Song, S.-H. Lee, and H.-J. Kim, “Seismic response of base isolating systems with U-shaped hysteretic dampers,” International Journal of Steel Structures, vol. 12, no. 2, pp. 285–298, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. C. O. Azeloglu, A. Edincliler, and A. Sagirli, “Investigation of seismic behavior of container crane structures by shake table tests and mathematical modeling,” Shock and Vibration, vol. 2014, Article ID 682647, 9 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. M. Wu and B. Samali, “Shake table testing of a base isolated model,” Engineering Structures, vol. 24, no. 9, pp. 1203–1215, 2002. View at Publisher · View at Google Scholar · View at Scopus
  31. B. Samali, Y. M. Wu, and J. Li, “Shake table tests on a mass eccentric model with base isolation,” Earthquake Engineering & Structural Dynamics, vol. 32, no. 9, pp. 1353–1372, 2003. View at Publisher · View at Google Scholar · View at Scopus
  32. T. J. Paulson, D. P. Abrams, and R. L. Mayes, “Shaking-table study of base isolation for masonry buildings,” Journal of Structural Engineering, vol. 117, no. 11, pp. 3315–3336, 1991. View at Publisher · View at Google Scholar · View at Scopus
  33. N. Sato, A. Kato, Y. Fukushima, and M. Iizuka, “Shaking table tests on failure characteristics of base isolation system for a DFBR plant,” Nuclear Engineering and Design, vol. 212, no. 1–3, pp. 293–305, 2002. View at Publisher · View at Google Scholar · View at Scopus
  34. T. Matsui, K. Mizuno, E. Sugiyama, Y. Esaka, and T. Hibino, “Shaking table tests on a seismically-isolated large-span arch supported by base structures,” Journal of Structural & Construction Engineering, pp. 87–94, 2004. View at Google Scholar
  35. M. Tomaževič, I. Klemenc, and P. Weiss, “Seismic upgrading of old masonry buildings by seismic isolation and CFRP laminates: a shaking-table study of reduced scale models,” Bulletin of Earthquake Engineering, vol. 7, no. 1, pp. 293–321, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. Liu, W.-G. Liu, W.-F. He, and Q.-R. Yang, “Shaking table tests for a complex museum's isolated structure,” Journal of Vibration and Shock, vol. 33, no. 4, pp. 107–112, 2014. View at Publisher · View at Google Scholar · View at Scopus
  37. GB, “Code for seismic design of buildings,” GB 50011-2010, National Standard of the People's Republic of China, 2010. View at Google Scholar
  38. “Technical specification for concrete structures of tall buildings,” Tech. Rep. JGJ3-2002, Profession Standard of the People's Republic of China, 2002.
  39. X. Lu, Y. Zhou, and W. Lu, “Shaking table model test and numerical analysis of a complex high-rise building,” Structural Design of Tall and Special Buildings, vol. 16, no. 2, pp. 131–164, 2007. View at Publisher · View at Google Scholar · View at Scopus
  40. “Specification of testing methods for earthquake resistant building,” Tech. Rep. JGJ101-96, Profession Standard of the People's Republic of China, 1996.
  41. R. Maseki, I. Nagashima, and M. Hisano, “An experimental study on application of hybrid-type base isolation system to high-rise buildings,” in Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand, 2000.
  42. I. V. Kalpakidis and M. C. Constantinou, “Principles of scaling and similarity for testing of lead-rubber bearings,” Earthquake Engineering & Structural Dynamics, vol. 39, no. 13, pp. 1551–1568, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. X. Lu, Y. Chen, and Y. Mao, “Shaking table model test and numerical analysis of a supertall building with high-level transfer storey,” The Structural Design of Tall and Special Buildings, vol. 21, no. 10, pp. 699–723, 2012. View at Publisher · View at Google Scholar · View at Scopus
  44. I. V. Kalpakidis and M. C. Constantinou, “Effects of heating on the behavior of lead-rubber bearings. I: theory,” Journal of Structural Engineering, vol. 135, no. 12, pp. 1440–1449, 2009. View at Publisher · View at Google Scholar · View at Scopus
  45. I. V. Kalpakidis and M. C. Constantinou, “Effects of heating on the behavior of lead-rubber bearings. II: Verification of theory,” Journal of Structural Engineering, vol. 135, no. 12, pp. 1450–1461, 2009. View at Publisher · View at Google Scholar · View at Scopus