Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 8284625, 9 pages
http://dx.doi.org/10.1155/2016/8284625
Research Article

An Identification Method for the Unbalance Parameters of a Rotor-Bearing System

1College of Mechanical Engineering, Hunan Institute of Engineering, Xiangtan 411101, China
2State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
3Hunan Province Cooperative Innovation Center for Wind Power Equipment and Energy Conversion, Hunan Institute of Engineering, Xiangtan 411101, China

Received 27 July 2015; Revised 7 October 2015; Accepted 13 October 2015

Academic Editor: Salvatore Strano

Copyright © 2016 Wengui Mao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Tiwari and V. Chakravarthy, “Simultaneous estimation of the residual unbalance and bearing dynamic parameters from the experimental data in a rotor-bearing system,” Mechanism and Machine Theory, vol. 44, no. 4, pp. 792–812, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. M. B. Deepthikumar, A. S. Sekhar, and M. R. Srikanthan, “Modal balancing of flexible rotors with bow and distributed unbalance,” Journal of Sound and Vibration, vol. 332, no. 24, pp. 6216–6233, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. G. N. D. S. Sudhakar and A. S. Sekhar, “Identification of unbalance in a rotor bearing system,” Journal of Sound and Vibration, vol. 330, no. 10, pp. 2299–2313, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Darlow, Balancing of High-Speed Machinery, Springer, New York, NY, USA, 1989.
  5. T. P. Goodman, “A least-squares method for computing balance corrections,” Journal of Engineering for Industry, vol. 86, no. 3, pp. 273–277, 1964. View at Publisher · View at Google Scholar
  6. C. D. Untaroiu, P. E. Allaire, and W. C. Foiles, “Balancing of flexible rotors using convex optimization techniques: optimum min-max LMI influence coefficient balancing,” Journal of Vibration and Acoustics, vol. 130, no. 2, Article ID 021006, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. F. Han, X. L. Guo, and H. Y. Gao, “Bearing parameter identification of rotor-bearing system based on Kriging surrogate model and evolutionary algorithm,” Journal of Sound and Vibration, vol. 332, no. 11, pp. 2659–2671, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Tiwari and V. Chakravarthy, “Simultaneous identification of residual unbalances and bearing dynamic parameters from impulse responses of rotor-bearing systems,” Mechanical Systems and Signal Processing, vol. 20, no. 7, pp. 1590–1614, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Edwards, A. W. Lees, and M. I. Friswell, “Experimental identification of excitation and support parameters of a flexible rotor-bearings-foundation system from a single run-down,” Journal of Sound and Vibration, vol. 232, no. 5, pp. 963–992, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. K.-Y. Lum, V. T. Coppola, and D. S. Bernstein, “Adaptive autocentering control for an active magnetic bearing supporting a rotor with unknown mass imbalance,” IEEE Transactions on Control Systems Technology, vol. 4, no. 5, pp. 587–597, 1996. View at Publisher · View at Google Scholar · View at Scopus
  11. M. S. De Queiroz, “An active identification method of rotor unbalance parameters,” Journal of Vibration and Control, vol. 15, no. 9, pp. 1365–1374, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. J. M. Varah, “A practical examination of some numerical methods for linear discrete ill-posed problems,” SIAM Review, vol. 21, no. 1, pp. 100–111, 1979. View at Publisher · View at Google Scholar
  13. K. Sekuła, C. Graczykowski, and J. Holnicki-Szulc, “On-line impact load identification,” Shock and Vibration, vol. 20, no. 1, pp. 123–141, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. X. Sun, J. Liu, X. Han et al., “A new improved regularization method for dynamic load identification,” Inverse Problems in Science and Engineering, vol. 22, no. 7, pp. 1741–5977, 2014. View at Google Scholar
  15. G. Genta, “Consistent matrices in rotor dynamic,” Meccanica, vol. 20, no. 3, pp. 235–248, 1985. View at Publisher · View at Google Scholar · View at Scopus
  16. H. P. Liu, H. Xu, P. J. Ellison, and Z. Jin, “Application of computational fluid dynamics and fluid-structure interaction method to the lubrication study of a rotor-bearing system,” Tribology Letters, vol. 38, no. 3, pp. 325–336, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. W. Xiong, Z. Hou, L. Lü et al., “Research on calculation method of stiffness and damping coefficients for hybrid bearings based on dynamic Mesh model,” Journal of Mechanical Engineering, vol. 48, no. 23, pp. 118–126, 2012. View at Google Scholar
  18. Z. Q. Hou, W. L. Xiong, and X. B. Yang, “Study on dynamic characteristics of a hydrostatic and hydrodynamic journal bearings for small diameter grinding spindle,” Advanced Materials Research, vol. 497, pp. 99–104, 2012. View at Google Scholar
  19. W. Mao, X. Han, and G. Liu, “Research on dynamic characteristics of sliding bearing nonlinear oil-film based on fluid-structure interactio,” China Mechanical Engineering, vol. 25, no. 3, pp. 383–387, 2014. View at Publisher · View at Google Scholar · View at Scopus
  20. G. R. Liu and X. Han, Computational Inverse Technique in Nondestructive Evaluation, CRC Press, 2003.
  21. G. R. Liu, W. B. Ma, and X. Han, “An inverse procedure for identification of loads on composite laminates,” Composites Part B: Engineering, vol. 33, no. 6, pp. 425–432, 2002. View at Publisher · View at Google Scholar · View at Scopus
  22. L. Wang, X. Han, J. Liu, X. He, and F. Huang, “A new regularization method and application to dynamic load identification problems,” Inverse Problems in Science and Engineering, vol. 19, no. 6, pp. 765–776, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Liu, X. Han, C. Jiang, H. M. Ning, and Y. C. Bai, “Dynamic load identification for uncertain structures based on interval analysis and regularization method,” International Journal of Computational Methods, vol. 8, no. 4, pp. 667–683, 2011. View at Publisher · View at Google Scholar · View at Scopus