Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 9581650, 2 pages
http://dx.doi.org/10.1155/2016/9581650
Editorial

The Use of Vibration Signals for Structural Health Monitoring, System Identification, Test Planning/Optimization, and Dynamic Model Validation/Updating

1Departamento de Engenharia Mecânica, Faculdade de Engenharia de Ilha Solteira, Universidade Estadual Paulista (UNESP), Ilha Solteira, SP, Brazil
2Department of Structural Engineering, University of California, San Diego, San Diego, CA, USA
3Department of Mechanical Engineering & Aeronautics, Stochastic Mechanical Systems & Automation Laboratory, University of Patras, Patras, Greece
4Engineering and the Environment, University of Southampton, Highfield, Southampton, UK

Received 6 September 2016; Accepted 6 September 2016

Copyright © 2016 Samuel da Silva et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

This article has no abstract.