Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 9739217, 18 pages
http://dx.doi.org/10.1155/2016/9739217
Research Article

The Behaviour of Mistuned Piezoelectric Shunt Systems and Its Estimation

1Department of Industrial Engineering, Università degli Studi di Parma, Parco Area delle Scienze 181/A, 43124 Parma, Italy
2Department of Mechanical Engineering, Politecnico di Milano, Via La Masa 34, 20156 Milan, Italy

Received 20 May 2016; Revised 18 July 2016; Accepted 26 July 2016

Academic Editor: Nicola Caterino

Copyright © 2016 M. Berardengo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Preumont, Vibration Control of Active Structures: An Introduction, Kluwer Academic, Dordrecht, Netherlands, 2nd edition, 2002. View at Publisher · View at Google Scholar · View at MathSciNet
  2. A. Preumont, Mechatronics—Dynamics of Electromechanical and Piezoelectric Systems, Springer, Dordrecht, The Netherlands, 2006.
  3. C. Fuller, S. Elliott, and P. Nelson, Active Control of Vibration, Acadamic Press, London, UK, 1997.
  4. N. W. Hagood and A. von Flotow, “Damping of structural vibrations with piezoelectric materials and passive electrical networks,” Journal of Sound and Vibration, vol. 146, no. 2, pp. 243–268, 1991. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Guyomar, Y. Jayet, L. Petit et al., “Synchronized switch harvesting applied to selfpowered smart systems: piezoactive microgenerators for autonomous wireless transmitters,” Sensors and Actuators A: Physical, vol. 138, no. 1, pp. 151–160, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Tang and K. W. Wang, “Active-passive hybrid piezoelectric networks for vibration control: comparisons and improvement,” Smart Materials and Structures, vol. 10, no. 4, pp. 794–806, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. K. Yamada, H. Matsuhisa, H. Utsuno, and K. Sawada, “Optimum tuning of series and parallel LR circuits for passive vibration suppression using piezoelectric elements,” Journal of Sound and Vibration, vol. 329, no. 24, pp. 5036–5057, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Soltani, G. Kerschen, G. Tondreau, and A. Deraemaeker, “Piezoelectric vibration damping using resonant shunt circuits: an exact solution,” Smart Materials and Structures, vol. 23, no. 12, Article ID 125014, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Høgsberg and S. Krenk, “Balanced calibration of resonant shunt circuits for piezoelectric vibration control,” Journal of Intelligent Material Systems and Structures, vol. 23, no. 17, pp. 1937–1948, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Høgsberg and S. Krenk, “Balanced calibration of resonant piezoelectric RL shunts with quasi-static background flexibility correction,” Journal of Sound and Vibration, vol. 341, pp. 16–30, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. O. Thomas, J. Ducarne, and J.-F. Deü, “Performance of piezoelectric shunts for vibration reduction,” Smart Materials and Structures, vol. 21, no. 1, article 015008, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. E. Doebelin, Measurement Systems: Application and Design, McGraw-Hill, New York, NY, USA, 2003.
  13. J. J. Hollkamp and T. F. Starchville Jr., “Self-tuning piezoelectric vibration absorber,” Journal of Intelligent Material Systems and Structures, vol. 5, no. 4, pp. 559–566, 1994. View at Publisher · View at Google Scholar · View at Scopus
  14. B. Zhou, F. Thouverez, and D. Lenoir, “Essentially nonlinear piezoelectric shunt circuits applied to mistuned bladed disks,” Journal of Sound and Vibration, vol. 333, no. 9, pp. 2520–2542, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Zhou, F. Thouverez, and D. Lenoir, “Vibration reduction of mistuned bladed disks by passive piezoelectric shunt damping techniques,” AIAA Journal, vol. 52, no. 6, pp. 1194–1206, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Behrens, A. J. Fleming, and S. O. R. Moheimani, “A broadband controller for shunt piezoelectric damping of structural vibration,” Smart Materials and Structures, vol. 18, no. 12, pp. 18–28, 2003. View at Google Scholar
  17. D. Niederberger, M. Morari, and S. Pietrzko, “Adaptive resonant shunted piezoelectric devices for vibration suppression,” in Proceedings of the Smart Structures and Materials 2003: Smart Structures and Integrated Systems, pp. 213–224, San Diego, Calif, USA, March 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. H. Hanselka, “Adaptronik und fragen zur systemzuverl ATP,” Automatisierungstechnische Praxis, vol. 2, pp. 44–49, 2002. View at Google Scholar
  19. M. Berardengo, A. Cigada, S. Manzoni, and M. Vanali, “Vibration control by means of piezoelectric actuators shunted with LR impedances: performance and robustness analysis,” Shock and Vibration, vol. 2015, Article ID 704265, 30 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Moheimani and A. Fleming, Piezoelectric Transducers for Vibration Control and Damping, Springer, London, UK, 2006.
  21. S. O. R. Moheimani, A. J. Fleming, and S. Behrens, “On the feedback structure of wideband piezoelectric shunt damping systems,” Smart Materials and Structures, vol. 12, no. 1, pp. 49–56, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. B. De Marneffe and A. Preumont, “Vibration damping with negative capacitance shunts: theory and experiment,” Smart Materials and Structures, vol. 17, no. 3, article 035015, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Krenk, “Frequency analysis of the tuned mass damper,” Journal of Applied Mechanics, vol. 72, no. 6, pp. 936–942, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. D. J. Ewins, Modal Testing: Theory, Practice and Application, Research Studies Press, Baldock, UK, 2nd edition, 2000.
  25. J. Ducarne, O. Thomas, and J.-F. Deü, “Placement and dimension optimization of shunted piezoelectric patches for vibration reduction,” Journal of Sound and Vibration, vol. 331, no. 14, pp. 3286–3303, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. O. Thomas, J.-F. Deü, and J. Ducarne, “Vibrations of an elastic structure with shunted piezoelectric patches: efficient finite element formulation and electromechanical coupling coefficients,” International Journal for Numerical Methods in Engineering, vol. 80, no. 2, pp. 235–268, 2009. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  27. M. Berardengo, O. Thomas, C. Giraud-Audine, and S. Manzoni, “Improved resistive shunt by means of negative capacitance: new circuit, performances and multi-mode control,” Smart Materials and Structures, vol. 25, no. 7, Article ID 075033, 2016. View at Publisher · View at Google Scholar
  28. B. Peeters, H. Van Der Auweraer, P. Guillaume, and J. Leuridan, “The PolyMAX frequency-domain method: a new standard for modal parameter estimation?” Shock and Vibration, vol. 11, no. 3-4, pp. 395–409, 2004. View at Publisher · View at Google Scholar · View at Scopus
  29. O. Thomas, C. Touzé, and A. Chaigne, “Asymmetric non-linear forced vibrations of free-edge circular plates. Part II: experiments,” Journal of Sound and Vibration, vol. 265, no. 5, pp. 1075–1101, 2003. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Brandt, Noise and Vibration Analysis—Signal Analysis and Experimental Procedures, John Wiley & Sons, New York, NY, USA, 2011.
  31. C. H. Park and D. J. Inman, “Enhanced piezoelectric shunt design,” Shock and Vibration, vol. 10, no. 2, pp. 127–133, 2003. View at Publisher · View at Google Scholar · View at Scopus
  32. B. Seba, J. Ni, and B. Lohmann, “Vibration attenuation using a piezoelectric shunt circuit based on finite element method analysis,” Smart Materials and Structures, vol. 15, no. 2, pp. 509–517, 2006. View at Publisher · View at Google Scholar · View at Scopus