Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017 (2017), Article ID 2314858, 6 pages
https://doi.org/10.1155/2017/2314858
Research Article

Simulations and Experiments on the Vibrational Characteristics of Cylindrical Shell Resonator Actuated by Piezoelectric Electrodes with Different Thicknesses

College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha, China

Correspondence should be addressed to Tianliang Qu

Received 24 March 2017; Accepted 15 May 2017; Published 12 June 2017

Academic Editor: Athanasios Chasalevris

Copyright © 2017 Yiming Luo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. M. Rozelle, “The hemispherical resonator gyro: from wineglass to the planets,” Advances in the Astronautical Sciences, vol. 134, pp. 1157–1178, 2009. View at Google Scholar
  2. V. V. Chikovani, I. M. Okon, A. S. Barabashov, and P. Tewksbury, “A set of high accuracy low cost metallic resonator CVG,” in Proceedings of the 2008 IEEE/ION Position, Location and Navigation Symposium (PLANS '08), pp. 238–243, Monterey, CA, USA, May 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. V. V. Chikovani, Y. A. Yatsenko, A. S. Barabashov, P. I. Marusyk, E. O. Umakhanov, and V. N. Taturin, “Improved accuracy metallic resonator CVG,” IEEE Aerospace and Electronic Systems Magazine, vol. 24, no. 5, pp. 40–43, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Titterton and J. Weston, “Modern inertial navigation technology and its application,” Electronics & Communication Engineering Journal, vol. 12, no. 2, pp. 49–64, 2000. View at Publisher · View at Google Scholar
  5. V. Chikovani and Y. Yatzenko, Coriolis force gyroscope with high sensitivity[P], United States Patent: 7281425B2, 2008.
  6. Y. A. Yatsenko and J. F. Petrenko, “Technological aspects of manufacturing of compound hemispherical resonators for small-sized vibratory gyroscopes,” in Proceedings of the Integrated Navigation Systems, RTO SCI International Conference, pp. 71–75, Petersburg, Russia, May 1999.
  7. Waston Industries, 2016, http://watson-gyro.com/product/rate-gyros/pro-gyro-rate-gyro.
  8. Innalabs, 2016, http://www.innalabs.com/en/products/gyroscopes/.
  9. V. F. Zhuravlev, “Theoretical Foundation of Hemispherical Resonator Gyro (HRG),” Izv. RAN, Mekhanika Tverdogo Tela, vol. 28, no. 3, pp. 3–15, 1993. View at Google Scholar
  10. Y. K. Zhbanov, “Theoretical aspects of balancing the hemispherical resonator gyro,” in Proceedings of the 2nd Saint Petersburg International Conference on Gyroscopic Technology and Navigation, vol. 88, 1995.
  11. F. V. Zhuravlev and D. D. Lynch, “Electric model of a hemispherical resonator gyro,” Mechanics of Solids, vol. 30, no. 5, pp. 10–21, 1995. View at Google Scholar
  12. D. A. Kovriguine, “Geometrical nonlinearity stabilizes a wave solid-state gyro,” Archive of Applied Mechanics, vol. 84, no. 2, pp. 159–172, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. E. I. Green, “The story of Q,” American Scientist, pp. 584–594, 1955. View at Google Scholar
  14. Y. Pan, D. Wang, Y. Wang et al., “Monolithic cylindrical fused silica resonators with high Q factors,” Sensors, vol. 16, no. 8, article 1185, 2016. View at Publisher · View at Google Scholar
  15. F. Goldschmidtboeing and P. Woias, “Characterization of different beam shapes for piezoelectric energy harvesting,” Journal of Micromechanics and Microengineering, vol. 18, no. 10, Article ID 104013, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. J. E. Loper and D. D. Lynch, “Sonic vibrating bell gyro,” Sonic vibrating bell gyro, U.S. Patent 4,157,041[P], 1979-6-5.
  17. D. Lynch and A. Matthews, “Dual-mode hemispherical resonator gyro operating characteristics,” in Proceedings of the 3rd Saint Petersburg International Conference on Integrated Navigation Systems, pp. 37–44, 1996.
  18. E. J. Loper and D. D. Lynch, “Projected system performance based on recent HRG test results (low noise inertial rotation sensor),” in Proceedings of the IEEE/AIAA 5th Digital Avionics Systems Conference, p. 18, 1983.
  19. D. M. Rozelle, “The hemispherical resonator gyro: from wineglass to the planets,” in Proceedings of the 19th AAS/AIAA Space Flight Mechanics Meeting, pp. 1157–1178, 2009.
  20. Y. Tao, Study on key technologies of cupped wave [pdf thesis], National University of Defense Technology, Changsha, China, 2011.
  21. J. Soderkvist, “Piezoelectric beams and vibrating angular rate sensors,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 38, no. 3, pp. 271–280, 1991. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Uehara, T. Ohtsuka, T. Inoue, M. Yoshimatu, H. Matudo, and M. Okazaki, “Miniaturized angular rate sensor with laminated quartz tuning fork,” in Proceedings of the 2005 Joint IEEE International Frequency Control Symposium (FCS) and Precise Time and Time Interval (PTTI) Systems and Applications Meeting, pp. 886–891, August 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. P. W. Loveday, “Analysis of piezoelectric ulstraonic transducers attached to waveguides using waveguide finite elements,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 54, no. 10, pp. 2045–2051, 2004. View at Google Scholar
  24. T. L. Floyd, Electric Circuits Fundamentals, Prentice hall, New Jersey, NJ, USA, 2009.
  25. B. Zhu, Y. Tao, Y. Wu, and Z. Chen, “Research on adhensive layer and its effects on vibtation characteristics of resonator and PZT of cupped gyro,” Chinese Journal of Sensors and Actuators, vol. 24, no. 9, pp. 1248–1252, 2011. View at Publisher · View at Google Scholar · View at Scopus