Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 3518232, 13 pages
https://doi.org/10.1155/2017/3518232
Research Article

The Performance of Resistance Progressive Collapse Analysis for High-Rise Frame-Shear Structure Based on OpenSees

Institute of Disaster Prevention Science and Safety Technology, Central South University, Changsha 410128, China

Correspondence should be addressed to Yaozhuang Li; moc.qq@558498144

Received 21 January 2017; Accepted 20 March 2017; Published 4 April 2017

Academic Editor: Aly-Mousaad Aly

Copyright © 2017 Qiang Zhang and Yaozhuang Li. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. Z. Lu, Y. Li, and L. P. Ye, Theory and Design Method for Progressive Collapse Prevention of Concrete Structures, China Architecture & Building Press, Beijing, China, 2011.
  2. M. Sasani, M. Bazan, and S. Sagiroglu, “Experimental and analytical progressive collapse evaluation of actual reinforced concrete structure,” ACI Structural Journal, vol. 104, no. 6, pp. 731–739, 2007. View at Google Scholar · View at Scopus
  3. L. Kwasniewski, “Nonlinear dynamic simulations of progressive collapse for a multistory building,” Engineering Structures, vol. 32, no. 5, pp. 1223–1235, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. P. X. Dat and T. K. Hai, “Membrane actions of RC slabs in mitigating progressive collapse of building structures,” Engineering Structures, vol. 55, pp. 107–115, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. United States General Services Administration (GSA), Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects, United States General Services Administration (GSA), Washington, DC, USA, 2010.
  6. Department of Defense (DoD), Unified Facilities Criteria (UFC): Design of Structures to Resist Progressive Collapse, Department of Defense, Washington, DC, USA, 2010.
  7. China Engineering Construction Standardization Association (CECS), “Code for anti-collapse design of building structures,” CECS 392:2014, China Engineering Construction Standardization Association (CECS), Beijing, China, 2014. View at Google Scholar
  8. W.-J. Yi, Q.-F. He, Y. Xiao, and S. K. Kunnath, “Experimental study on progressive collapse-resistant behavior of reinforced concrete frame structures,” ACI Structural Journal, vol. 105, no. 4, pp. 433–439, 2008. View at Google Scholar · View at Scopus
  9. S. Li, S. Shan, C. Zhai, and L. Xie, “Experimental and numerical study on progressive collapse process of RC frames with full-height infill walls,” Engineering Failure Analysis, vol. 59, pp. 57–68, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. S.-J. Wang, F.-S. Liu, and Z.-D. Xu, “Experimental and theoretical analyses on entire course of vertical progressive collapse of spatial RC frame structures,” Engineering Mechanics, vol. 32, no. 5, pp. 162–177, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. L. M. Zhang and X. L. Liu, “Some issues in the collapse analysis of frame structures,” Journal of Shang Hai Jiao Tong University, vol. 35, no. 10, pp. 1578–1582, 2003. View at Google Scholar
  12. A. G. Vlassis, B. A. Izzuddin, A. Y. Elghazouli, and D. A. Nethercot, “Progressive collapse of multi-storey buildings due to failed floor impact,” Engineering Structures, vol. 31, no. 7, pp. 1522–1534, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Li, X. Lu, H. Guan, and P. Ren, “Numerical investigation of progressive collapse resistance of reinforced concrete frames subject to column removals from different stories,” Advances in Structural Engineering, vol. 19, no. 2, pp. 314–326, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. W.-D. Wang, J.-X. Wang, and X.-Y. Zhou, “Nonlinear dynamic progressive collapse analysis of composite frames with concrete-filled steel tubular columns based on fiber model,” Engineering Mechanics, vol. 31, no. 9, pp. 142–151, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD), “Code for design of concrete structures,” GB 50010-2010, Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD), Beijing, China, 2010. View at Google Scholar
  16. Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD), “Code for seismic design of buildings,” GB 50011-2010, Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD), Beijing, China, 2010. View at Google Scholar
  17. T. Kabeyasawa, H. Shiohara, S. Otani et al., “Analysis of the full-scale seven-story reinforced concrete test structure,” Journal of the Faculty of Engineering, University of Tokyo, vol. 84, pp. 203–239, 1982. View at Google Scholar
  18. K. Kolozvari and J. W. Wallace, “Practical nonlinear modeling of reinforced concrete structural walls,” ASCE Journal of Structural Engineering, vol. 142, no. 12, 2016. View at Publisher · View at Google Scholar
  19. F. C. Filippou and A. Issa, “Nonlinear analysis of reinforced concrete frames under cyclic load reversals,” EERC Report 88/12, Earthquake Engineering Research Center, Berkeley, Calif, USA, 1988. View at Google Scholar
  20. M. Talaat and K. M. Mosalam, “Modeling progressive collapse in reinforced concrete buildings using direct element removal,” Earthquake Engineering and Structural Dynamics, vol. 38, no. 5, pp. 609–634, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. M. H. Scott and G. L. Fenves, “Krylov subspace accelerated newton algorithm: application to dynamic progressive collapse simulation of frames,” Journal of Structural Engineering, vol. 136, no. 5, pp. 473–480, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. H. M. Zhang, Study on the Performance-Based Seismic Design Method for Shear Wall Structures, Tongji University, Shanghai, China, 2007.
  23. T. A. Tran and J. W. Wallace, “Cyclic testing of moderate-aspect-ratio reinforced concrete structural walls,” ACI Structural Journal, vol. 112, no. 6, pp. 653–665, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Dazio, K. Beyer, and H. Bachmann, “Quasi-static cyclic tests and plastic hinge analysis of RC structural walls,” Engineering Structures, vol. 31, no. 7, pp. 1556–1571, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. R. Burgueño, X. Liu, and E. M. Hines, “Web crushing capacity of high-strength concrete structural walls: experimental study,” ACI Structural Journal, vol. 111, no. 2, pp. 235–246, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. P. Ren, Y. Li, X. Lu, H. Guan, and Y. Zhou, “Experimental investigation of progressive collapse resistance of one-way reinforced concrete beam-slab substructures under a middle-column-removal scenario,” Engineering Structures, vol. 118, pp. 28–40, 2016. View at Publisher · View at Google Scholar · View at Scopus
  27. G. E. Wolfgram, Experimental modelling and analysis of three one-tenth-scale reinforced concrete frame-wall structures [Ph.D. thesis], University of Illinois at Urbana-Champaign, Champaign, Ill, USA, 1984.
  28. Y. Bao and S. K. Kunnath, “Simplified progressive collapse simulation of RC frame-wall structures,” Engineering Structures, vol. 32, no. 10, pp. 3153–3162, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. P. Ren, Y. Li, H. Guan et al., “Progressive collapse resistance of two typical high-rise RC frame shear wall structures,” Journal of Performance of Constructed Facilities, vol. 29, no. 3, Article ID 04014087, pp. 1–9, 2015. View at Publisher · View at Google Scholar
  30. Y. Li, X. Lu, H. Guan, and L. Ye, “An improved tie force method for progressive collapse resistance design of reinforced concrete frame structures,” Engineering Structures, vol. 33, no. 10, pp. 2931–2942, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. X. Lu, L. Xie, H. Guan, Y. Huang, and X. Lu, “A shear wall element for nonlinear seismic analysis of super-tall buildings using OpenSees,” Finite Elements in Analysis and Design, vol. 98, pp. 14–25, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Gerasimidis and J. Sideri, “A new partial-distributed damage method for progressive collapse analysis of steel frames,” Journal of Constructional Steel Research, vol. 119, pp. 233–245, 2016. View at Publisher · View at Google Scholar · View at Scopus
  33. S. Gerasimidis, G. Deodatis, T. Kontoroupi, and M. Ettouney, “Loss-of-stability induced progressive collapse modes in 3D steel moment frames,” Structure and Infrastructure Engineering, vol. 11, no. 3, pp. 334–344, 2015. View at Publisher · View at Google Scholar · View at Scopus