Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 4018629, 35 pages
https://doi.org/10.1155/2017/4018629
Research Article

Benchmark Solution for Free Vibration of Moderately Thick Functionally Graded Sandwich Sector Plates on Two-Parameter Elastic Foundation with General Boundary Conditions

1College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
2Naval Academy of Armament, Beijing 100161, China

Correspondence should be addressed to Fuzhen Pang; nc.ude.uebrh@nehzufgnap

Received 2 April 2017; Revised 4 June 2017; Accepted 11 June 2017; Published 12 September 2017

Academic Editor: Lorenzo Dozio

Copyright © 2017 Haichao Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Zafarmand and M. Kadkhodayan, “Three dimensional elasticity solution for static and dynamic analysis of multi-directional functionally graded thick sector plates with general boundary conditions,” Composites Part B: Engineering, vol. 69, pp. 592–602, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Q. Xu, “Three-dimensional exact solutions for the free vibration of laminated transversely isotropic circular, annular and sectorial plates with unusual boundary conditions,” Archive of Applied Mechanics, vol. 78, no. 7, pp. 543–558, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. V. Tahouneh and M. H. Yas, “3-D free vibration analysis of thick functionally graded annular sector plates on Pasternak elastic foundation via 2-D Differential quadrature method,” Acta Mechanica, vol. 223, no. 9, pp. 1879–1897, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  4. M. Tahani and S. M. Mousavi, “Analytical solution for bending problem of moderately thick composite annular sector plates with general boundary conditions and loadings using multi-term extended Kantorovich method,” Archive of Applied Mechanics, vol. 83, no. 6, pp. 969–985, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. Su, G. Jin, and X. Wang, “Free vibration analysis of laminated composite and functionally graded sector plates with general boundary conditions,” Composite Structures, vol. 132, pp. 720–736, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. R. S. Srinivasan and V. Thiruvenkatachari, “Free vibration analysis of laminated annular sector plates,” Journal of Sound and Vibration, vol. 109, no. 1, pp. 89–96, 1986. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Sharma, H. B. Sharda, and Y. Nath, “Stability and vibration of thick laminated composite sector plates,” Journal of Sound and Vibration, vol. 287, no. 1-2, pp. 1–23, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Sharma, “Free vibration of moderately thick antisymmetric laminated annular sector plates with elastic edge constraints,” International Journal of Mechanical Sciences, vol. 83, pp. 124–132, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. A. R. Saidi, F. Hejripour, and E. Jomehzadeh, “On the stress singularities and boundary layer in moderately thick functionally graded sectorial plates,” Applied Mathematical Modelling, vol. 34, no. 11, pp. 3478–3492, 2010. View at Publisher · View at Google Scholar · View at MathSciNet
  10. A. R. Saidi, E. Jomehzadeh, and S. R. Atashipour, “Exact analytical solution for bending analysis of functionally graded annular sector plates,” International Journal of Engineering, Transactions A: Basics, vol. 22, no. 3, pp. 307–316, 2009. View at Google Scholar · View at Scopus
  11. A. R. Saidi and A. Hasani Baferani, “Thermal buckling analysis of moderately thick functionally graded annular sector plates,” Composite Structures, vol. 92, no. 7, pp. 1744–1752, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Sahraee, “Bending analysis of functionally graded sectorial plates using Levinson plate theory,” Composite Structures, vol. 88, no. 4, pp. 548–557, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Panda and G. G. Sopan, “Nonlinear analysis of smart functionally graded annular sector plates using cylindrically orthotropic piezoelectric fiber reinforced composite,” International Journal of Mechanics and Materials in Design, vol. 9, no. 1, pp. 35–53, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. H. R. Noori, E. Jomehzadeh, and A. R. Saidi, “On the stretching and bending analyses of thin functionally graded annular sector plates,” in Materials with Complex Behaviour II, vol. 16 of Advanced Structured Materials, pp. 433–446, Springer, Berlin, Germany, 2012. View at Publisher · View at Google Scholar
  15. A. Naderi and A. R. Saidi, “Exact solution for stability analysis of moderately thick functionally graded sector plates on elastic foundation,” Composite Structures, vol. 93, no. 2, pp. 629–638, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Naderi and A. R. Saidi, “An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates,” Archive of Applied Mechanics, vol. 81, no. 6, pp. 809–828, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Naderi and A. R. Saidi, “Buckling analysis of functionally graded annular sector plates resting on elastic foundations,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 225, no. 2, pp. 312–325, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. S. M. Mousavi and M. Tahani, “Analytical solution for bending of moderately thick radially functionally graded sector plates with general boundary conditions using multi-term extended Kantorovich method,” Composites Part B: Engineering, vol. 43, no. 3, pp. 1405–1416, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Mehrabian and M. E. Golmakani, “Nonlinear bending analysis of radial-stiffened annular laminated sector plates with dynamic relaxation method,” Computers and Mathematics with Applications, vol. 69, no. 10, pp. 1272–1302, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. P. Malekzadeh, “Three-dimensional free vibration analysis of thick laminated annular sector plates using a hybrid method,” Composite Structures, vol. 90, no. 4, pp. 428–437, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Maleki and M. Tahani, “Bending analysis of laminated sector plates with polar and rectilinear orthotropy,” European Journal of Mechanics. A. Solids, vol. 40, pp. 84–96, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  22. X. Liang, H.-L. Kou, L. Wang, A. C. Palmer, Z. Wang, and G. Liu, “Three-dimensional transient analysis of functionally graded material annular sector plate under various boundary conditions,” Composite Structures, vol. 132, pp. 584–596, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. E. Jomehzadeh, A. R. Saidi, and S. R. Atashipour, “An analytical approach for stress analysis of functionally graded annular sector plates,” Materials and Design, vol. 30, no. 9, pp. 3679–3685, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Jin, Z. Su, T. Ye, and S. Gao, “Three-dimensional free vibration analysis of functionally graded annular sector plates with general boundary conditions,” Composites Part B: Engineering, vol. 83, pp. 352–366, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Houmat, “Large amplitude free vibration of shear deformable laminated composite annular sector plates by a sector p-element,” International Journal of Non-Linear Mechanics, vol. 43, no. 9, pp. 834–843, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Hosseini-Hashemi, H. Akhavan, H. R. D. Taher, N. Daemi, and A. Alibeigloo, “Differential quadrature analysis of functionally graded circular and annular sector plates on elastic foundation,” Materials and Design, vol. 31, no. 4, pp. 1871–1880, 2010. View at Publisher · View at Google Scholar · View at Scopus
  27. M. E. Golmakani and M. Kadkhodayan, “Large deflection thermoelastic analysis of functionally graded stiffened annular sector plates,” International Journal of Mechanical Sciences, vol. 69, pp. 94–106, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. M. E. Golmakani and J. Alamatian, “Large deflection analysis of shear deformable radially functionally graded sector plates on two-parameter elastic foundations,” European Journal of Mechanics. A. Solids, vol. 42, pp. 251–265, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  29. A. Fereidoon, A. Mohyeddin, M. Sheikhi, and H. Rahmani, “Bending analysis of functionally graded annular sector plates by extended Kantorovich method,” Composites Part B: Engineering, vol. 43, no. 5, pp. 2172–2179, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. S. R. Falahatgar and M. Salehi, “Dynamic relaxation nonlinear viscoelastic analysis of annular sector composite plate,” Journal of Composite Materials, vol. 43, no. 3, pp. 257–275, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. K. Cheung and W. L. Kwok, “Dynamic analysis of circular and sector thick, layered plates,” Journal of Sound and Vibration, vol. 42, no. 2, pp. 147–158, 1975. View at Publisher · View at Google Scholar · View at Scopus
  32. S. A. Belalia and A. Houmat, “Nonlinear free vibration of functionally graded shear deformable sector plates by a curved triangular p-element,” European Journal of Mechanics. A. Solids, vol. 35, pp. 1–9, 2012. View at Publisher · View at Google Scholar · View at MathSciNet
  33. A. H. Baferani, A. R. Saidi, and E. Jomehzadeh, “Exact analytical solution for free vibration of functionally graded thin annular sector plates resting on elastic foundation,” Journal of Vibration and Control, vol. 18, no. 2, pp. 246–267, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. K. Asemi, M. Salehi, and M. Akhlaghi, “Three dimensional biaxial buckling analysis of functionally graded annular sector plate fully or partially supported on Winkler elastic foundation,” Aerospace Science and Technology, vol. 39, pp. 426–441, 2014. View at Publisher · View at Google Scholar · View at Scopus
  35. A. Andakhshideh, S. Maleki, and M. M. Aghdam, “Non-linear bending analysis of laminated sector plates using generalized differential quadrature,” Composite Structures, vol. 92, no. 9, pp. 2258–2264, 2010. View at Publisher · View at Google Scholar · View at Scopus
  36. F. Alinaghizadeh and M. Kadkhodayan, “Investigation of nonlinear bending analysis of moderately thick functionally graded material sector plates subjected to thermomechanical loads by the GDQ method,” Journal of Engineering Mechanics, vol. 140, no. 5, article 04014012, 2014. View at Publisher · View at Google Scholar · View at Scopus
  37. M. M. Aghdam, N. Shahmansouri, and M. Mohammadi, “Extended Kantorovich method for static analysis of moderately thick functionally graded sector plates,” Mathematics and Computers in Simulation, vol. 86, pp. 118–130, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  38. A. R. Saidi, A. H. Baferani, and E. Jomehzadeh, “Benchmark solution for free vibration of functionally graded moderately thick annular sector plates,” Acta Mechanica, vol. 219, no. 3-4, pp. 309–335, 2011. View at Publisher · View at Google Scholar · View at Scopus
  39. S. Mirtalaie, M. Hajabasi, and F. Hejripour, “Free vibration analysis of functionally graded moderately thick annular sector plates using differential quadrature method,” in Applied Mechanics and Materials, Trans Tech Publications, 2012. View at Google Scholar
  40. A. M. Zenkour, “A comprehensive analysis of functionally graded sandwich plates: part 2. Buckling and free vibration,” International Journal of Solids and Structures, vol. 42, no. 18-19, pp. 5243–5258, 2005. View at Publisher · View at Google Scholar · View at Scopus
  41. K. M. Liew, J. Yang, and Y. F. Wu, “Nonlinear vibration of a coating-FGM-substrate cylindrical panel subjected to a temperature gradient,” Computer Methods in Applied Mechanics and Engineering, vol. 195, no. 9-12, pp. 1007–1026, 2006. View at Publisher · View at Google Scholar · View at Scopus
  42. S. Kapuria, M. Bhattacharyya, and A. N. Kumar, “Bending and free vibration response of layered functionally graded beams: a theoretical model and its experimental validation,” Composite Structures, vol. 82, no. 3, pp. 390–402, 2008. View at Publisher · View at Google Scholar · View at Scopus
  43. Q. Li, V. P. Iu, and K. P. Kou, “Three-dimensional vibration analysis of functionally graded material sandwich plates,” Journal of Sound and Vibration, vol. 311, no. 1-2, pp. 498–515, 2008. View at Publisher · View at Google Scholar · View at Scopus
  44. H. J. Xiang and J. Yang, “Free and forced vibration of a laminated FGM Timoshenko beam of variable thickness under heat conduction,” Composites—Part B: Engineering, vol. 39, no. 2, pp. 292–303, 2008. View at Publisher · View at Google Scholar · View at Scopus
  45. M. Kashtalyan and M. Menshykova, “Three-dimensional elasticity solution for sandwich panels with a functionally graded core,” Composite Structures, vol. 87, no. 1, pp. 36–43, 2009. View at Publisher · View at Google Scholar · View at Scopus
  46. S. C. Pradhan and T. Murmu, “Thermo-mechanical vibration of FGM sandwich beam under variable elastic foundations using differential quadrature method,” Journal of Sound and Vibration, vol. 321, no. 1-2, pp. 342–362, 2009. View at Publisher · View at Google Scholar · View at Scopus
  47. M. Cinefra, S. Belouettar, M. Soave, and E. Carrera, “Variable kinematic models applied to free-vibration analysis of functionally graded material shells,” European Journal of Mechanics, A/Solids, vol. 29, no. 6, pp. 1078–1087, 2010. View at Publisher · View at Google Scholar · View at Scopus
  48. N. El Meiche, A. Tounsi, N. Ziane, I. Mechab, and E. A. Adda.Bedia, “A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate,” International Journal of Mechanical Sciences, vol. 53, no. 4, pp. 237–247, 2011. View at Publisher · View at Google Scholar · View at Scopus
  49. L. Hadji, H. A. Atmane, A. Tounsi, I. Mechab, and E. A. Adda Bedia, “Free vibration of functionally graded sandwich plates using four-variable refined plate theory,” Applied Mathematics and Mechanics. English Edition, vol. 32, no. 7, pp. 925–942, 2011. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  50. S. Natarajan and G. Manickam, “Bending and vibration of functionally graded material sandwich plates using an accurate theory,” Finite Elements in Analysis and Design, vol. 57, pp. 32–42, 2012. View at Publisher · View at Google Scholar · View at Scopus
  51. A. M. A. Neves, A. J. M. Ferreira, E. Carrera et al., “Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique,” Composites Part B: Engineering, vol. 44, no. 1, pp. 657–674, 2013. View at Publisher · View at Google Scholar · View at Scopus
  52. M. Sobhy, “Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions,” Composite Structures, vol. 99, pp. 76–87, 2013. View at Publisher · View at Google Scholar · View at Scopus
  53. A. Alibeigloo and K. M. Liew, “Free vibration analysis of sandwich cylindrical panel with functionally graded core using three-dimensional theory of elasticity,” Composite Structures, vol. 113, no. 1, pp. 23–30, 2014. View at Publisher · View at Google Scholar · View at Scopus
  54. F. A. Fazzolari and E. Carrera, “Refined hierarchical kinematics quasi-3D Ritz models for free vibration analysis of doubly curved FGM shells and sandwich shells with FGM core,” Journal of Sound and Vibration, vol. 333, no. 5, pp. 1485–1508, 2014. View at Publisher · View at Google Scholar · View at Scopus
  55. P. Malekzadeh and M. Ghaedsharaf, “Three-dimensional free vibration of laminated cylindrical panels with functionally graded layers,” Composite Structures, vol. 108, no. 1, pp. 894–904, 2014. View at Publisher · View at Google Scholar · View at Scopus
  56. H.-T. Thai, T.-K. Nguyen, T. P. Vo, and J. Lee, “Analysis of functionally graded sandwich plates using a new first-order shear deformation theory,” European Journal of Mechanics. A. Solids, vol. 45, pp. 211–225, 2014. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  57. G. Jin, S. Shi, Z. Su, S. Li, and Z. Liu, “A modified Fourier–Ritz approach for free vibration analysis of laminated functionally graded shallow shells with general boundary conditions,” International Journal of Mechanical Sciences, vol. 93, pp. 256–269, 2015. View at Publisher · View at Google Scholar
  58. W. L. Li, “Free vibrations of beams with general boundary conditions,” Journal of Sound and Vibration, vol. 237, no. 4, pp. 709–725, 2000. View at Publisher · View at Google Scholar · View at Scopus
  59. W. L. Li, “Comparison of fourier sine and cosine series expansions for beams with arbitrary boundary conditions,” Journal of Sound and Vibration, vol. 255, no. 1, pp. 185–194, 2003. View at Publisher · View at Google Scholar · View at Scopus
  60. D. Shi, Q. Wang, X. Shi, and F. Pang, “An accurate solution method for the vibration analysis of Timoshenko beams with general elastic supports,” Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, pp. 2327–2340, 2014. View at Publisher · View at Google Scholar
  61. D. Shao, S. Hu, Q. Wang, and F. Pang, “Free vibration of refined higher-order shear deformation composite laminated beams with general boundary conditions,” Composites Part B: Engineering, vol. 108, pp. 75–90, 2017. View at Publisher · View at Google Scholar
  62. W. L. Li, “A new method for structural model updating and joint stiffness identification,” Mechanical Systems and Signal Processing, vol. 16, no. 1, pp. 155–167, 2002. View at Publisher · View at Google Scholar · View at Scopus
  63. Q. Wang, D. Shi, and Q. Liang, “Free vibration analysis of axially loaded laminated composite beams with general boundary conditions by using a modified Fourier-Ritz approach,” Journal of Composite Materials, vol. 50, no. 15, pp. 2111–2135, 2016. View at Publisher · View at Google Scholar · View at Scopus
  64. D. Shi, Q. Wang, X. Shi, and F. Pang, “A series solution for the in-plane vibration analysis of orthotropic rectangular plates with non-uniform elastic boundary constraints and internal line supports,” Archive of Applied Mechanics, vol. 85, no. 1, pp. 51–73, 2015. View at Publisher · View at Google Scholar · View at Scopus
  65. D. Shao, F. Hu, Q. Wang, F. Pang, and S. Hu, “Transient response analysis of cross-ply composite laminated rectangular plates with general boundary restraints by the method of reverberation ray matrix,” Composite Structures, vol. 152, pp. 168–182, 2016. View at Publisher · View at Google Scholar · View at Scopus
  66. D. Shi, Q. Liang, Q. Wang, and X. Teng, “A unified solution for free vibration of orthotropic circular, annular and sector plates with general boundary conditions,” Journal of Vibroengineering, vol. 18, no. 5, pp. 3138–3152, 2016. View at Publisher · View at Google Scholar
  67. D. Shi, X. Lv, Q. Wang, and Q. Liang, “A unified solution for free vibration of orthotropic annular sector thin plates with general boundary conditions, internal radial line and circumferential arc supports,” Journal of Vibroengineering, vol. 18, no. 1, pp. 361–377, 2016. View at Google Scholar · View at Scopus
  68. X. Shi, D. Shi, W. L. Li, and Q. Wang, “A unified method for free vibration analysis of circular, annular and sector plates with arbitrary boundary conditions,” Journal of Vibration and Control, vol. 22, no. 2, pp. 442–456, 2016. View at Publisher · View at Google Scholar · View at Scopus
  69. Q. Wang, D. Shi, Q. Liang, and F. Ahad, “An improved Fourier series solution for the dynamic analysis of laminated composite annular, circular, and sector plate with general boundary conditions,” Journal of Composite Materials, vol. 50, no. 30, pp. 4199–4233, 2016. View at Publisher · View at Google Scholar
  70. Q. Wang, D. Shi, Q. Liang, and F. e Ahad, “A unified solution for free in-plane vibration of orthotropic circular, annular and sector plates with general boundary conditions,” Applied Mathematical Modelling, vol. 40, no. 21-22, pp. 9228–9253, 2016. View at Publisher · View at Google Scholar · View at MathSciNet
  71. Q. Wang, D. Shi, Q. Liang, and X. Shi, “A unified solution for vibration analysis of functionally graded circular, annular and sector plates with general boundary conditions,” Composites Part B: Engineering, vol. 88, pp. 264–294, 2016. View at Publisher · View at Google Scholar · View at Scopus
  72. Q. Wang, D. Shi, and X. Shi, “A modified solution for the free vibration analysis of moderately thick orthotropic rectangular plates with general boundary conditions, internal line supports and resting on elastic foundation,” Meccanica, vol. 51, no. 8, pp. 1985–2017, 2016. View at Publisher · View at Google Scholar · View at Scopus
  73. Q. Wang, F. Pang, B. Qin, and Q. Liang, “A unified formulation for free vibration of functionally graded carbon nanotube reinforced composite spherical panels and shells of revolution with general elastic restraints by means of the Rayleigh-Ritz method,” Polymer Composites, 2017. View at Publisher · View at Google Scholar
  74. Q. Wang, D. Shi, Q. Liang, and F. Pang, “A unified solution for vibration analysis of moderately thick, functionally graded rectangular plates with general boundary restraints and internal line supports,” Mechanics of Advanced Materials and Structures, vol. 24, no. 11, pp. 961–973, 2017. View at Publisher · View at Google Scholar
  75. H. Zhang, D. Shi, and Q. Wang, “An improved Fourier series solution for free vibration analysis of the moderately thick laminated composite rectangular plate with non-uniform boundary conditions,” International Journal of Mechanical Sciences, vol. 121, pp. 1–20, 2017. View at Publisher · View at Google Scholar
  76. K. Zhang, D. Shi, W. Wang, and Q. Wang, “Mechanical characterization of hybrid lattice-to-steel joint with pyramidal CFRP truss for marine application,” Composite Structures, vol. 160, pp. 1198–1204, 2017. View at Publisher · View at Google Scholar
  77. D. Shi, Y. Zhao, Q. Wang, X. Teng, and F. Pang, “A unified spectro-geometric-ritz method for vibration analysis of open and closed shells with arbitrary boundary conditions,” Shock and Vibration, vol. 2016, Article ID 4097123, 30 pages, 2016. View at Publisher · View at Google Scholar
  78. D. Shao, S. Hu, Q. Wang, and F. Pang, “An enhanced reverberation-ray matrix approach for transient response analysis of composite laminated shallow shells with general boundary conditions,” Composite Structures, vol. 162, pp. 133–155, 2017. View at Publisher · View at Google Scholar
  79. Q. Wang, B. Qin, D. Shi, and Q. Liang, “A semi-analytical method for vibration analysis of functionally graded carbon nanotube reinforced composite doubly-curved panels and shells of revolution,” Composite Structures, vol. 174, pp. 87–109, 2017. View at Publisher · View at Google Scholar
  80. Q. Wang, D. Shi, Q. Liang, and F. Pang, “Free vibrations of composite laminated doubly-curved shells and panels of revolution with general elastic restraints,” Applied Mathematical Modelling, vol. 46, pp. 227–262, 2017. View at Publisher · View at Google Scholar
  81. Q. Wang, D. Shi, Q. Liang, and F. Pang, “Free vibration of four-parameter functionally graded moderately thick doubly-curved panels and shells of revolution with general boundary conditions,” Applied Mathematical Modelling, vol. 42, pp. 705–734, 2017. View at Publisher · View at Google Scholar · View at MathSciNet
  82. Q. Wang, D. Shi, F. Pang, and F. e Ahad, “Benchmark solution for free vibration of thick open cylindrical shells on Pasternak foundation with general boundary conditions,” Meccanica, vol. 52, no. 1-2, pp. 457–482, 2017. View at Publisher · View at Google Scholar · View at MathSciNet
  83. H. Zhang, D. Shi, Q. Wang, and B. Qin, “Free vibration of functionally graded parabolic and circular panels with general boundary conditions,” Curved and Layered Structures, vol. 4, no. 1, pp. 52–84, 2017. View at Publisher · View at Google Scholar
  84. H. Xu and W. L. Li, “Dynamic behavior of multi-span bridges under moving loads with focusing on the effect of the coupling conditions between spans,” Journal of Sound and Vibration, vol. 312, no. 4-5, pp. 736–753, 2008. View at Publisher · View at Google Scholar · View at Scopus
  85. Y. H. Chen, G. Jin, J. Du, and Z. Liu, “Power transmission analysis of coupled rectangular plates with elastically restrained coupling edge including in-plane vibration,” in Proceedings of the 20th International Congress on Acoustics, ICA 2010, pp. 1–7, Sydney, Australia, 2010.
  86. J. Du, W. L. Li, Z. Liu, T. Yang, and G. Jin, “Free vibration of two elastically coupled rectangular plates with uniform elastic boundary restraints,” Journal of Sound and Vibration, vol. 330, no. 4, pp. 788–804, 2011. View at Publisher · View at Google Scholar · View at Scopus
  87. Y. Chen, G. Jin, M. Zhu, Z. Liu, J. Du, and W. L. Li, “Vibration behaviors of a box-type structure built up by plates and energy transmission through the structure,” Journal of Sound and Vibration, vol. 331, no. 4, pp. 849–867, 2012. View at Publisher · View at Google Scholar · View at Scopus
  88. X. Lv, D. Shi, Q. Wang, and Q. Liang, “A unified solution for the in-plane vibration analysis of multi-span curved Timoshenko beams with general elastic boundary and coupling conditions,” Journal of Vibroengineering, vol. 18, no. 2, pp. 1071–1087, 2016. View at Google Scholar · View at Scopus
  89. F. Gruttmann and W. Wagner, “Shear correction factors in timoshenko's beam theory for arbitrary shaped cross-sections,” Computational Mechanics, vol. 27, no. 3, pp. 199–207, 2001. View at Publisher · View at Google Scholar · View at Scopus
  90. Y. Zhou, Q. Wang, D. Shi, Q. Liang, and Z. Zhang, “Exact solutions for the free in-plane vibrations of rectangular plates with arbitrary boundary conditions,” International Journal of Mechanical Sciences, vol. 130, pp. 1–10, 2017. View at Publisher · View at Google Scholar
  91. V. Tajeddini and A. Ohadi, “Three-dimensional vibration analysis of functionally graded thick, annular plates with variable thickness via polynomial-Ritz method,” Journal of Vibration and Control, vol. 18, no. 11, pp. 1698–1707, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  92. V. Tajeddini, A. Ohadi, and M. Sadighi, “Three-dimensional free vibration of variable thickness thick circular and annular isotropic and functionally graded plates on Pasternak foundation,” International Journal of Mechanical Sciences, vol. 53, no. 4, pp. 300–308, 2011. View at Publisher · View at Google Scholar · View at Scopus