Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017 (2017), Article ID 4051541, 14 pages
https://doi.org/10.1155/2017/4051541
Research Article

Modeling Friction Performance of Drill String Torsional Oscillation Using Dynamic Friction Model

1State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, China
2Independent Project Analysis Inc., Washington, DC, USA
3School of Mechatronic Engineering, Southwest Petroleum University, Chengdu, China

Correspondence should be addressed to Xingming Wang

Received 2 January 2017; Revised 10 June 2017; Accepted 2 July 2017; Published 14 August 2017

Academic Editor: Giorgio Dalpiaz

Copyright © 2017 Xingming Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. Maidla and M. Haci, “Understanding Torque: The Key to Slide-Drilling Directional Wells,” in Proceedings of the IADC/SPE Drilling Conference, Society of Petroleum Engineers, Dallas, Tex, USA, 2004. View at Publisher · View at Google Scholar
  2. E. Maidla, M. Haci, S. Jones, M. Cluchey, M. Alexander, and T. Warren, “Field proof of the new sliding technology for directional drilling,” in Proceedings of the 2005 SPE/IADC Drilling Conference - Drilling Technology: Back to Basics, pp. 723–730, February 2005. View at Scopus
  3. E. Maidla, M. Haci, and D. Wright, “Case history summary: Horizontal drilling performance improvement due to torque rocking on 800 horizontal land wells drilled for unconventional gas resources,” in Proceedings of the SPE Annual Technical Conference and Exhibition 2009, ATCE 2009, pp. 195–206, October 2009. View at Scopus
  4. C. Gillan, S. Boone, G. Kostiuk, C. Schlembach, J. Pinto, and M. LeBlanc, “Applying precision drill pipe rotation and oscillation to slide drilling problems,” in Proceedings of the SPE/IADC Drilling Conference and Exhibition 2009, pp. 53–65, March 2009. View at Scopus
  5. M. Urbakh, J. Klafter, D. Gourdon, and J. Israelachvill, “The nonlinear nature of friction,” Nature, vol. 430, no. 6999, pp. 525–528, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. R. Pohlman and E. Lehfeldt, “Influence of ultrasonic vibration on metallic friction,” Ultrasonics, vol. 4, no. 4, pp. 178–185, 1966. View at Publisher · View at Google Scholar
  7. S. Matunaga and J. OnodA, “A novel method of friction force reduction by vibration and its application to gravity compensation,” in Proceedings of the 33rd Structures, Structural Dynamics and Materials Conference, Dallas, Tex, USA, 1992. View at Publisher · View at Google Scholar
  8. H. Storck, W. Littmann, J. Wallaschek, and M. Mracek, “The effect of friction reduction in presence of ultrasonic vibrations and its relevance to travelling wave ultrasonic motors,” Ultrasonics, vol. 40, no. 1-8, pp. 379–383, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. V. C. Kumar and I. M. Hutchings, “Reduction of the sliding friction of metals by the application of longitudinal or transverse ultrasonic vibration,” Tribology International, vol. 37, no. 10, pp. 833–840, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. C. C. Tsai and C. H. Tseng, “The effect of friction reduction in the presence of in-plane vibrations,” Archive of Applied Mechanics, vol. 75, no. 2-3, pp. 164–176, 2006. View at Publisher · View at Google Scholar
  11. P. Gutowski and M. Leus, “The effect of longitudinal tangential vibrations on friction and driving forces in sliding motion,” Tribology International, vol. 55, pp. 108–118, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. P. Gutowski and M. Leus, “Computational model for friction force estimation in sliding motion at transverse tangential vibrations of elastic contact support,” Tribology International, vol. 90, pp. 455–462, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. X. Wang, P. Chen, and T. Ma, “a. Modeling and experimental investigations on the drag reduction performance of an axial oscillation tool,” Journal of Natural Gas Science Engineering, pp. 39–118, 2017. View at Google Scholar
  14. A. Mehmood, S. Laghrouche, M. El Bagdouri, and F. S. Ahmed, “Sensitivity analysis of lugre friction model for pneumatic actuator control,” in Proceedings of the 2010 IEEE Vehicle Power and Propulsion Conference, VPPC 2010, September 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. P. S. M. Dougherty, R. Pudjoprawoto, and C. Fred Higgs, “Bit cutter-on-rock tribometry: Analyzing friction and rate-of-penetration for deep well drilling substrates,” Tribology International, vol. 77, pp. 178–185, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. J. A. Greenwood and J. B. P. Williamson, “Contact of nominally flat surfaces,” Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol. 295, no. 1442, pp. 300–319, 1966. View at Google Scholar
  17. A. Majumdar and B. Bhushan, “Fractal model of elastic-plastic contact between rough surfaces,” Journal of Tribology, vol. 113, no. 1, pp. 1–11, 1991. View at Publisher · View at Google Scholar
  18. C. Canudas de Wit, H. Olsson, K. J. Astrom, and P. Lischinsky, “A new model for control of systems with friction,” IEEE Transactions on Automatic Control, vol. 40, no. 3, pp. 419–425, 1995. View at Publisher · View at Google Scholar · View at MathSciNet
  19. H. Olsson, K. J. Åström, C. Canudas De Wit, M. Gäfvert, and P. Lischinsky, “Friction Models and Friction Compensation,” European Journal of Control, vol. 4, no. 3, pp. 176–195, 1998. View at Publisher · View at Google Scholar · View at Scopus
  20. S. A. Mirhaj, “Evaluation of Shear Forces and Stream-Thrust Forces in Torque and Drag Analysis,” in Proceedings of the SPE Asia Pacific Oil and Gas Conference and Exhibition, Jakarta, Indonesia, 2001. View at Publisher · View at Google Scholar
  21. E. Cayeux, H. J. Skadsem, B. Daireaux, and R. Holand, “Challenges and Solutions to the Correct Interpretation of Drilling Friction Tests,” in Proceedings of the SPE/IADC Drilling Conference and Exhibition, The Hague, The Netherlands, 2017. View at Publisher · View at Google Scholar
  22. P. Wang, H. Ni, R. Wang, Z. Li, and Y. Wang, “Experimental investigation of the effect of in-plane vibrations on friction for different materials,” Tribology International, vol. 99, pp. 237–247, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. M. R. Kermani, R. V. Patel, and M. Moallem, “Friction identification in robotic manipulators: case studies,” in Proceedings of 2005 IEEE Conference on Control Applications, 2005. CCA 2005, pp. 1170–1175, Toronto, Canada, 2005. View at Publisher · View at Google Scholar
  24. Y. Yu, Y. Li, and J. Li, “Parameter identification and sensitivity analysis of an improved LuGre friction model for magnetorheological elastomer base isolator,” Meccanica, vol. 50, no. 11, pp. 2691–2707, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. H. Dou and Y. Yang, “Further understanding on fluid flow through multi-porous media in low-permeability reservoirs,” Petroleum Exploration and Development, vol. 39, no. 5, pp. 674–682, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. I. Giorgio and D. Scerrato, “Multi-scale concrete model with rate-dependent internal friction,” European Journal of Environmental and Civil Engineering, pp. 1–19, 2016. View at Publisher · View at Google Scholar · View at Scopus
  27. X. Wang, H. Ni, and R. Wang, “b. Modeling and analyzing the movement of drill string while being rocked on the ground,” Journal of Natural Gas Science Engineering, pp. 39–28, 2017. View at Google Scholar
  28. Z. F. Li, “Fundamental equations and its applications for dynamical analysis of rod and pipe string in oil and gas wells,” Acta Petrolei Sinica, vol. 20, no. 3, pp. 87–90, 1999. View at Google Scholar
  29. T. Piatkowski, “Dahl and LuGre dynamic friction models - The analysis of selected properties,” Mechanism and Machine Theory, vol. 73, pp. 91–100, 2014. View at Publisher · View at Google Scholar · View at Scopus