Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017 (2017), Article ID 4137805, 11 pages
https://doi.org/10.1155/2017/4137805
Research Article

Effects of Heating Rate on the Dynamic Tensile Mechanical Properties of Coal Sandstone during Thermal Treatment

1State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China
2School of Mechanics and Civil Engineering, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China
3School of Civil Engineering, Xuzhou Institute of Technology, Xuzhou, Jiangsu 221018, China

Correspondence should be addressed to Xianbiao Mao; moc.361@tmucoambx

Received 25 June 2017; Accepted 18 September 2017; Published 18 October 2017

Academic Editor: Longjun Dong

Copyright © 2017 Ming Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Yang, X. Zhang, S. Liu, L. Yu, and W. Zhang, “Field test of large-scale hydrogen manufacturing from underground coal gasification (UCG),” International Journal of Hydrogen Energy, vol. 33, no. 4, pp. 1275–1285, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Salmachi and M. Haghighi, “Feasibility study of thermally enhanced gas recovery of coal seam gas reservoirs using geothermal resources,” Energy and Fuels, vol. 26, no. 8, pp. 5048–5059, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Tan, Y. Yin, S. Gu, and Z. Tian, “Multi-index monitoring and evaluation on rock burst in Yangcheng Mine,” Shock and Vibration, vol. 2015, Article ID 624893, 5 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Ouyang, Q. Qi, S. Zhao, B. Wu, and N. Zhang, “The mechanism and application of deep-hole precracking blasting on rockburst prevention,” Shock and Vibration, vol. 2015, Article ID 625691, 7 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Cheng, J. Bai, Y. Ma, J. Sun, Y. Liang, and F. Jiang, “Control mechanism of rock burst in the floor of roadway driven along next goaf in thick coal seam with large obliquity angle in deep well,” Shock and Vibration, vol. 2015, Article ID 750807, 10 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. L.-J. Dong, J. Wesseloo, Y. Potvin, and X.-B. Li, “Discriminant models of blasts and seismic events in mine seismology,” International Journal of Rock Mechanics and Mining Sciences, vol. 86, pp. 282–291, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. L. Dong, J. Wesseloo, Y. Potvin, and X. Li, “Discrimination of mine seismic events and blasts using the fisher classifier, naive bayesian classifier and logistic regression,” Rock Mechanics and Rock Engineering, vol. 49, no. 1, pp. 183–211, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. L. Dong, W. Shu, X. Li, G. Han, and W. Zou, “Three dimensional comprehensive analytical solutions for locating sources of sensor networks in unknown velocity mining system,” IEEE Access, vol. 5, pp. 11337–11351, 2017. View at Publisher · View at Google Scholar
  9. L. L. N. Mambou, J. Ndop, and J. M. B. Ndjaka, “Theoretical investigations of mechanical properties of sandstone rock specimen at high temperatures,” Journal of Mining Science, vol. 50, no. 1, pp. 69–80, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. C. Inserra, S. Biwa, and Y. Chen, “Influence of thermal damage on linear and nonlinear acoustic properties of granite,” International Journal of Rock Mechanics and Mining Sciences, vol. 62, pp. 96–104, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. K. Kim, J. Kemeny, and M. Nickerson, “Effect of rapid thermal cooling on mechanical rock properties,” Rock Mechanics and Rock Engineering, vol. 47, no. 6, pp. 2005–2019, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Ghabezloo and J. Sulem, “Stress dependent thermal pressurization of a fluid-saturated rock,” Rock Mechanics and Rock Engineering, vol. 42, no. 1, pp. 1–24, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Yavuz, S. Demirdag, and S. Caran, “Thermal effect on the physical properties of carbonate rocks,” International Journal of Rock Mechanics and Mining Sciences, vol. 47, no. 1, pp. 94–103, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. F. Tang, L. Wang, Y. Lu, and X. Yang, “Thermophysical properties of coal measure strata under high temperature,” Environmental Earth Sciences, vol. 73, no. 10, pp. 6009–6018, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. M. H. B. Nasseri, A. Schubnel, and R. P. Young, “Coupled evolutions of fracture toughness and elastic wave velocities at high crack density in thermally treated Westerly granite,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 4, pp. 601–616, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. Z. X. Zhang, J. Yu, S. Q. Kou, and P.-A. Lindqvist, “Effects of high temperatures on dynamic rock fracture,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 2, pp. 211–225, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. T. Yin, X. Li, K. Xia, and S. Huang, “Effect of thermal treatment on the dynamic fracture toughness of laurentian granite,” Rock Mechanics and Rock Engineering, vol. 45, no. 6, pp. 1087–1094, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. T. Yin, X. Li, W. Cao, and K. Xia, “Effects of thermal treatment on tensile strength of laurentian granite using brazilian test,” Rock Mechanics and Rock Engineering, vol. 48, no. 6, pp. 2213–2223, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. W. Yao, Y. Xu, W. Wang, and P. Kanopolous, “Dependence of dynamic tensile strength of longyou sandstone on heat-treatment temperature and loading rate,” Rock Mechanics and Rock Engineering, vol. 49, no. 10, pp. 3899–3915, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Huang and K. Xia, “Effect of heat-treatment on the dynamic compressive strength of Longyou sandstone,” Engineering Geology, vol. 191, pp. 1–7, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. Q. B. Zhang and J. Zhao, “A review of dynamic experimental techniques and mechanical behaviour of rock materials,” Rock Mechanics and Rock Engineering, vol. 47, no. 4, pp. 1411–1478, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Siegesmund, S. Mosch, C. Scheffzük, and D. I. Nikolayev, “The bowing potential of granitic rocks: rock fabrics, thermal properties and residual strain,” Environmental Geology, vol. 55, no. 7, pp. 1437–1448, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. Y. Chen, T. Kobayashi, Y. Kuriki, and H. Kusuda, “Observation of microstructures in granite samples subjected to one cycle of heating and cooling,” Journal of the Japan Society of Engineering Geology, vol. 49, no. 4, pp. 217–226, 2008. View at Publisher · View at Google Scholar
  24. J. Zuo, H. Xie, H. Zhou, and S. Peng, “Thermal-mechanical coupled effect on fracture mechanism and plastic characteristics of sandstone,” Science China Technological Sciences, vol. 50, no. 6, pp. 833–843, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. K. Thirumalai and S. G. Demou, “Effect of reduced pressure on thermal-expansion behavior of rocks and its significance to thermal fragmentation,” Journal of Applied Physics, vol. 41, no. 13, pp. 5147–5151, 1970. View at Publisher · View at Google Scholar · View at Scopus
  26. D. Richter and G. Simmons, “Thermal expansion behavior of igneous rocks,” in International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 11, pp. 403–411, Elsevier, 1974. View at Publisher · View at Google Scholar · View at Scopus
  27. M. M. Attallah, M. Strangwood, and C. L. Davis, “Influence of the heating rate on the initiation of primary recrystallization in a deformed Al-Mg alloy,” Scripta Materialia, vol. 63, no. 4, pp. 371–374, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. E. Cruz-Zaragoza, P. R. González, J. Azorín, and C. Furetta, “Heating rate effect on thermoluminescence glow curves of LiF:Mg,Cu,P+PTFE phosphor,” Applied Radiation and Isotopes, vol. 69, no. 10, pp. 1369–1373, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. W. Pan, Z. Ma, J. Liu, Q. Liu, and J. Wang, “Effect of heating rate on morphology and structure of COFe2O4 nanofibers,” Materials Letters, vol. 65, no. 21-22, pp. 3269–3271, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. N. M. Lohan, B. Pricop, L.-G. Bujoreanu, and N. Cimpoeşu, “Heating rate effects on reverse martensitic transformation in a Cu-Zn-Al shape memory alloy,” International Journal of Materials Research, vol. 102, no. 11, pp. 1345–1351, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. D. Wu, G. Liu, S. Chen, and R. Sun, “An experimental investigation on heating rate effect in the thermal behavior of perhydrous bituminous coal during pyrolysis,” Journal of Thermal Analysis and Calorimetry, vol. 119, no. 3, pp. 2195–2203, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. C. Yong and C.-Y. Wang, “Thermally induced acoustic emission in westerly granite,” Geophysical Research Letters, vol. 7, no. 12, pp. 1089–1092, 1980. View at Publisher · View at Google Scholar
  33. Y. X. Zhou, K. Xia, X. B. Li et al., “Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials,” International Journal of Rock Mechanics and Mining Sciences, vol. 49, pp. 105–112, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. F. Dai, R. Chen, and K. Xia, “A Semi-circular bend technique for determining dynamic fracture toughness,” Experimental Mechanics, vol. 50, no. 6, pp. 783–791, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. G. J. Churchman, “Is the geological concept of clay minerals appropriate for soil science? A literature-based and philosophical analysis,” Physics and Chemistry of the Earth, vol. 35, no. 15-18, pp. 927–940, 2010. View at Publisher · View at Google Scholar · View at Scopus
  36. R. A. Dawe, G. C. Maitland, M. Rigby, and E. B. Smith, “High temperature viscosities and intermolecular forces of quasi-spherical molecules,” Transactions of the Faraday Society, vol. 66, pp. 1955–1965, 1970. View at Publisher · View at Google Scholar · View at Scopus