Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 5387459, 13 pages
https://doi.org/10.1155/2017/5387459
Research Article

Acoustic Emission Characteristics and Failure Mechanism of Fractured Rock under Different Loading Rates

1Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
2State Key Laboratory of Mining Disaster Prevention and Control Co-Founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China
3Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan 250061, China
4State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China
5College of Pipeline and Civil Engineering, China University of Petroleum, Qingdao 266555, China

Correspondence should be addressed to Gang Wang; moc.liamg@0111gnaggnaw

Received 13 June 2017; Revised 21 August 2017; Accepted 12 September 2017; Published 15 October 2017

Academic Editor: M. I. Herreros

Copyright © 2017 Yongzheng Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. F. Brace and E. G. Bombolakis, “A note on brittle crack growth in compression,” Journal of Geophysical Research: Atmospheres, vol. 68, no. 12, pp. 3709–3713, 1963. View at Publisher · View at Google Scholar
  2. M. Adams and G. Sines, “Crack extension from flaws in a brittle material subjected to compression,” Tectonophysics, vol. 49, no. 1-2, pp. 97–118, 1978. View at Publisher · View at Google Scholar · View at Scopus
  3. T. N. Dey and C.-Y. Wang, “Some mechanisms of microcrack growth and interaction in compressive rock failure,” International Journal of Rock Mechanics and Mining Sciences, vol. 18, no. 3, pp. 199–209, 1981. View at Publisher · View at Google Scholar · View at Scopus
  4. M. F. Ashby and S. D. Hallam, “The failure of brittle solids containing small cracks under compressive stress states,” Acta Metallurgica et Materialia, vol. 34, no. 3, pp. 497–510, 1986. View at Publisher · View at Google Scholar · View at Scopus
  5. A. V. Dyskin and L. N. Germanovich, “A model of crack growth in microcracked rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 30, no. 7, pp. 813–820, 1993. View at Publisher · View at Google Scholar · View at Scopus
  6. R. H. C. Wong and K. T. Chau, “The coalescence of frictional cracks and the shear zone formation in brittle solids under compressive stresses,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 34, no. 3-4, p. 366, 1997. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Vásárhelyi and A. Bobet, “Modeling of crack initiation, propagation and coalescence in uniaxial compression,” Rock Mechanics and Rock Engineering, vol. 33, no. 2, pp. 119–139, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. R. H. C. Wong, K. T. Chau, C. A. Tang, and P. Lin, “Analysis of crack coalescence in rock-like materials containing three flaws—part I: experimental approach,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 7, pp. 909–924, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. E. Sahouryeh, A. V. Dyskin, and L. N. Germanovich, “Crack growth under biaxial compression,” Engineering Fracture Mechanics, vol. 69, no. 18, pp. 2187–2198, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Lee and S. Jeon, “An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression,” International Journal of Solids and Structures, vol. 48, no. 6, pp. 979–999, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. S. Wang, W. S. Sloan, and C. D. Sheng, “Numerical study of failure behaviour of pre-cracked rock specimens under conventional triaxial compression,” International Journal of Solids and Structures, vol. 51, no. 5, pp. 1132–1148, 2014. View at Google Scholar
  12. J.-X. Ren and X.-T. Hui, “Primary study on meso-damage propagation mechanism of cracked-sandstone using computerized tomography under uniaxial compression,” Rock and Soil Mechanics, vol. 26, pp. 48–52, 2005. View at Google Scholar · View at Scopus
  13. S. Li, T. Li, G. Wang et al., “CT real-time scanning tests on rock specimens with artificial initial crack under uniaxial conditions,” Chinese Journal of Rock Mechanics and Engineering, vol. 26, no. 3, pp. 484–429, 2007. View at Google Scholar
  14. S. Yang, X. Liu, and Y. Li, “Experimental analysis of mechanical behavior of sandstone containing hole and fissure under uniaxial compression,” Chinese Journal of Rock Mechanics and Engineering, vol. 31, no. 2, pp. 3539–3546, 2012. View at Google Scholar · View at Scopus
  15. A. A. Griffith, “The phenomena of rupture and flow in solids,” Philosophical Transactions of the Royal Society A: Mathematical, Physical & Engineering Sciences, vol. 221, pp. 163–198, 1920. View at Publisher · View at Google Scholar
  16. N. B. Whittaker, N. R. Singh, and G. Sun, Rock Fracture Mechanics Principles, Design and Applications, Elsevier, 1992.
  17. P. A. Cundall, “Computer Model for Simulating Progressive, Large-Scale Movements in Block Rock Systems,” Symposium of International Society of Rock Mechanics, vol. 1, no. ii-b, pp. 11–18, 1971. View at Google Scholar
  18. P. A. Cundall and O. D. L. Strack, “The distinct numerical model for granular assemblies,” Géotechnique, vol. 29, no. 1, pp. 47–65, 1979. View at Publisher · View at Google Scholar · View at Scopus
  19. D. O. Potyondy and P. A. Cundall, “A bonded-particle model for rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 8, pp. 1329–1364, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Cho, C. D. Martin, and D. C. Sego, “A clumped particle model for rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 7, pp. 997–1010, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Yoon, “Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 6, pp. 871–889, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. X.-P. Zhang and L. N. Y. Wong, “Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach,” Rock Mechanics and Rock Engineering, vol. 45, no. 5, pp. 711–737, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Ming-rong and C. Jian-feng, Rock mechanics, 49-50, Tongji University Press, Shanghai, 2006.
  24. W.-Z. Zhong, K.-J. He, Z.-Y. Zhou, W. Xia, and Y.-Y. Li, “Calibration of damping coefficient in discrete element method simulation,” Acta Physica Sinica, vol. 58, no. 8, pp. 5155–5161, 2009. View at Google Scholar · View at Scopus
  25. G.-Q. Zhou, J. Zhou, Y. Lu, and T. Li, “Selection of damping parameters used in a particle flow code (PFC2D),” Journal of China University of Mining and Technology, vol. 40, no. 5, pp. 667–672, 2011. View at Google Scholar · View at Scopus
  26. A. J. Feustel, “Seismic attenuation in underground mines: A comparative evaluation of methods and results,” Tectonophysics, vol. 289, no. 1-3, pp. 31–49, 1998. View at Publisher · View at Google Scholar · View at Scopus
  27. J. Hazzard and B. Damjanac, “Further investigations of microseismicity in bonded particle models,” in Proceedings of the 3rd international FLAC/DEM symposium, pp. 22–24.
  28. A. McGarr, “Some comparisons between mining-induced and laboratory earthquakes,” Pure and Applied Geophysics, vol. 142, no. 3-4, pp. 467–489, 1994. View at Publisher · View at Google Scholar · View at Scopus
  29. J. F. Hazzard, R. P. Young, and S. C. Maxwell, “Micromechanical modeling of cracking and failure in brittle rocks,” Journal of Geophysical Research: Solid Earth, vol. 105, no. 7, pp. 16683–16697, 2000. View at Publisher · View at Google Scholar · View at Scopus
  30. J. F. Hazzard and R. P. Young, “Simulating acoustic emissions in bonded-particle models of rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 37, no. 5, pp. 867–872, 2000. View at Publisher · View at Google Scholar · View at Scopus