Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 5468950, 23 pages
https://doi.org/10.1155/2017/5468950
Research Article

Long-Term Vibration Monitoring of the Effects of Temperature and Humidity on PC Girders with and without Fly Ash considering ASR Deterioration

1Graduate School of Natural Science and Technology, Kanazawa University, Kanazawa, Japan
2School of Environmental Design, Kanazawa University, Kanazawa, Japan

Correspondence should be addressed to Tuan Minh Ha; moc.liamg@kbdx90nauthnim

Received 26 May 2017; Accepted 27 July 2017; Published 26 September 2017

Academic Editor: Chao Tao

Copyright © 2017 Tuan Minh Ha et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. O. Huth, G. Feltrin, J. Maeck, N. Kilic, and M. Motavalli, “Damage identification using modal data: experiences on a prestressed concrete bridge,” Journal of Structural Engineering, vol. 131, no. 12, pp. 1898–1910, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Hassiotis and G. D. Jeong, “Identification of stiffness reductions using natural frequencies,” Journal of Engineering Mechanics, vol. 121, no. 10, pp. 1106–1113, 1995. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Xia, H. Hao, J. M. W. Brownjohn, and P.-Q. Xia, “Damage identification of structures with uncertain frequency and mode shape data,” Earthquake Engineering & Structural Dynamics, vol. 31, no. 5, pp. 1053–1066, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Y. Shi, S. S. Law, and L. M. Zhang, “Damage localization by directly using incomplete mode shapes,” Journal of Engineering Mechanics, vol. 126, no. 6, pp. 656–660, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. A. K. Pandey, M. Biswas, and M. M. Samman, “Damage detection from changes in curvature mode shapes,” Journal of Sound and Vibration, vol. 145, no. 2, pp. 321–332, 1991. View at Publisher · View at Google Scholar · View at Scopus
  6. A. K. Pandey and M. Biswas, “Damage detection in structures using changes in flexibility,” Journal of Sound and Vibration, vol. 169, no. 1, pp. 3–17, 1994. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. Y. Shi, S. S. Law, and L. M. Zhang, “Improved damage quantification from elemental modal strain energy change,” Journal of Engineering Mechanics, vol. 128, no. 5, pp. 521–529, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Xia, H. Hao, G. Zanardo, and A. Deeks, “Long term vibration monitoring of an RC slab: temperature and humidity effect,” Engineering Structures, vol. 28, no. 3, pp. 441–452, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. J. H. G. Macdonald and W. E. Daniell, “Variation of modal parameters of a cable-stayed bridge identified from ambient vibration measurements and FE modelling,” Engineering Structures, vol. 27, no. 13, pp. 1916–1930, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. Z.-D. Xu and Z. Wu, “Simulation of the effect of temperature variation on damage detection in a long-span cable-stayed bridge,” Structural Health Monitoring, vol. 6, no. 3, pp. 177–189, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Kim, J. Park, and B. Lee, “Vibration-based damage monitoring in model plate-girder bridges under uncertain temperature conditions,” Engineering Structures, vol. 29, no. 7, pp. 1354–1365, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. P. Cornwell, C. R. Farrar, S. W. Doebling, and H. Sohn, “Environmental variability of modal properties,” Experimental Techniques, vol. 23, no. 6, pp. 45–48, 1999. View at Google Scholar · View at Scopus
  13. B. Peeters and G. De Roeck, “One-year monitoring of the Z24-bridge: environmental effects versus damage events,” Earthquake Engineering & Structural Dynamics, vol. 30, no. 2, pp. 149–171, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Ha, S. Fukada, N. Arima, N. Moriyama, and T. Miyashita, “Study on vibration and structural performance of PC Girder removed due to salt damage,” in Proceedings of the 14th East Asia-Pacific Conference on Structural Engineering and Construction, pp. 680-681, 2016.
  15. Y. Xia, Y.-L. Xu, Z.-L. Wei, H.-P. Zhu, and X.-Q. Zhou, “Variation of structural vibration characteristics versus non-uniform temperature distribution,” Engineering Structures, vol. 33, no. 1, pp. 146–153, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Yamamura, M. Sakurada, K. Kobayashi, and K. Torii, “Application of concrete using fly ash to PC girder bridges,” Cement & Concrete, vol. 828, pp. 22–27, 2016. View at Google Scholar
  17. J.-N. Juang and R. S. Pappa, “An eigensystem realization algorithm for modal parameter identification and model reduction,” Journal of Guidance, Control, and Dynamics, vol. 8, no. 5, pp. 620–627, 1985. View at Publisher · View at Google Scholar · View at Scopus
  18. The R Manuals, 2017, https://cran.r-project.org/manuals.html.
  19. P. Moser and B. Moaveni, “Environmental effects on the identified natural frequencies of the Dowling Hall Footbridge,” Mechanical Systems and Signal Processing, vol. 25, no. 7, pp. 2336–2357, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Sugiura, K. Kobayashi, S. Fukada, and K. Torii, “Diagnosis the ASR deterioration of the prestressed concrete girder by cylinder cores,” in Proceedings of the JCI annual convention, Sendai, Japan, 2017. View at Publisher · View at Google Scholar
  21. A. D. Dimarogonas, “Vibration of cracked structures: a state of the art review,” Engineering Fracture Mechanics, vol. 55, no. 5, pp. 831–857, 1996. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Rezaee and H. Fekrmandi, “A theoretical and experimental investigation on free vibration vehavior of a cantilever beam with a breathing crack,” Shock and Vibration, vol. 19, no. 2, pp. 175–186, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. A. P. Bovsunovskii, “Numerical study of vibrations of a nonlinear mechanical system simulating a cracked body,” Strength of Materials, vol. 31, no. 6, pp. 571–581, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. R. O. Curadelli, J. D. Riera, D. Ambrosini, and M. G. Amani, “Damage detection by means of structural damping identification,” Engineering Structures, vol. 30, no. 12, pp. 3497–3504, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. D. J. Ewins, Modal Testing: Theory and Practice, Research Studies, New York, NY, USA, 2nd edition, 2000.
  26. “User’s manual of FX+ for DIANA version 9.6. Tnodiana.com,” 2016, https://support.tnodiana.com/manuals/d96/Diana.html.
  27. V. Kodur, “Properties of concrete at elevated temperatures,” ISRN Civil Engineering, vol. 2014, Article ID 468510, 15 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. P. J. Barr, J. F. Stanton, and M. O. Eberhard, “Effects of temperature variations on precast, prestressed concrete bridge girders,” Journal of Bridge Engineering, vol. 10, no. 2, pp. 186–194, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. W. Li, R. Wang, D. Li, and D. Fang, “A model of temperature-dependent Young's modulus for ultrahigh temperature ceramics,” Physics Research International, vol. 2011, Article ID 791545, 3 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. “EN, 1992-1-2: Design of concrete structures. Part 1-2: general rules-structural fire design. Eurocode 2, European Committee for Standardization, Brussels, Belgium,” 2004.
  31. V. R. Kodur and T. Z. Harmathy, “Properties of building materials,” in SFPE Handbook of Fire Protection Engineering, P. J. DiNenno, Ed., National Fire Protection Association, Quincy, MA, USA, 2008. View at Publisher · View at Google Scholar
  32. CEB-FIP, Model Code 1993, Thomas Telford, London, UK, 1993.
  33. S. Fukada, T. M. Ha, K. Kobayashi, and K. Torii, “Influence on load carrying capacity of PC girder using reactive aggregate by fly ash,” Proceedings of the Japan Concrete Institute, vol. 39, no. 2, pp. 355–360, 2017. View at Google Scholar