Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 6150193, 10 pages
https://doi.org/10.1155/2017/6150193
Research Article

Experimental and Numerical Research on Cylindrical Tubes under Outer Cylindrical Explosive Waves

1State Key Laboratory for Disaster Prevention & Mitigation of Explosion & Impact, PLA University of Science and Technology, Nanjing 210007, China
2Key Laboratory of Intense Dynamic Loading and Effect, Northwest Institute of Nuclear Technology, Xi’an 710024, China

Correspondence should be addressed to Sui Yaguang; nc.ca.tnin@gnaugayius

Received 5 January 2017; Revised 29 March 2017; Accepted 9 April 2017; Published 4 June 2017

Academic Editor: Evgeny Petrov

Copyright © 2017 Sui Yaguang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. H. Lee and B. H. K. Lee, “Cylindrical Imploding Shock Waves,” Physics of Fluids, vol. 8, no. 12, pp. 2148–2152, 1965. View at Publisher · View at Google Scholar
  2. H. Matsuo, “Converging shock waves generated by instantaneous energy release over cylindrical surfaces,” Physics of Fluids, vol. 22, no. 9, pp. 1618–1622, 1979. View at Publisher · View at Google Scholar · View at Scopus
  3. J. H. T. Wu, R. A. Neemeh, and P. P. Ostrowski, “Experimental studies of the production of converging cylindrical shock waves,” AIAA Journal, vol. 18, no. 1, pp. 47-48, 1980. View at Publisher · View at Google Scholar
  4. N. Apazidis, M. B. Lesser, N. Tillmark, and B. Johansson, “An experimental and theoretical study of converging polygonal shock waves,” Shock Waves, vol. 12, no. 1, pp. 39–58, 2002. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. E. Krasik, A. Grinenko, A. Sayapin, and V. T. Gurovich, “Generation of sub-Mbar pressure by converging shock waves produced by the underwater electrical explosion of a wire array,” Physical Review E, vol. 73, Article ID 057301, 2006. View at Google Scholar
  6. L. D. Bertholf, L. D. Buxton, B. J. Thorne et al., “Damage in steel plates from hypervelocity impact. II. Numerical results and spall measurement,” Journal of Applied Physics, vol. 46, no. 9, pp. 3776–3783, 1975 (Bulgarian). View at Publisher · View at Google Scholar · View at Scopus
  7. J. Buchar, S. Rolc, and J. Hrebícek, “Strain rate dependence of the spall strength of steels,” Le Journal de Physique IV, vol. 07, no. C3, pp. C3-951–C3-956, 1997. View at Publisher · View at Google Scholar
  8. S. F. Gnyusov, V. P. Rotshtein, A. E. Mayer et al., “Simulation and experimental investigation of the spall fracture of 304L stainless steel irradiated by a nanosecond relativistic high-current electron beam,” International Journal of Fracture, vol. 199, no. 1, pp. 59–70, 2016. View at Publisher · View at Google Scholar
  9. G. Heilig, N. Durr, M. Sauer, and A. Klomfass, “Mesoscale analysis of sintered metals fragmentation under explosive and subsequent impact loading,” Procedia Engineering, vol. 58, pp. 653–662, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. K. Ramajeyathilagam, C. P. Vendhan, and V. Bhujanga Rao, “Experimental and numerical investigations on deformation of cylindrical shell panels to underwater explosion,” Shock and Vibration, vol. 8, no. 5, Article ID 798735, pp. 253–270, 2001. View at Publisher · View at Google Scholar · View at Scopus
  11. Z. Zhang, F. Ming, and A. Zhang, “Damage characteristics of coated cylindrical shells subjected to underwater contact explosion,” Shock and Vibration, vol. 2014, Article ID 763607, 15 pages, 2014. View at Publisher · View at Google Scholar
  12. Y. Du, L. Ma, J. Zheng, F. Zhang, and A. Zhang, “Coupled simulation of explosion-driven fracture of cylindrical shell using SPH-FEM method,” International Journal of Pressure Vessels and Piping, pp. 28–35, 2016. View at Publisher · View at Google Scholar
  13. L. Xuemei, “The spall characteristics of cylindrical steel tube under inward explosion loading,” Explosion and Shock Waves, vol. 25, pp. 107–111, 2005. View at Google Scholar
  14. K. Terao, H. Kobayashi, and Z. Dianfeng, “Experimental investigation of cylindrical detonation wave,” Journal of Physics Conference Series, vol. 774, no. 1, article 012074, 2016. View at Publisher · View at Google Scholar
  15. E. A. Kozlov and A. V. Petrovtsev, “Cumulation of a spherically converging shock wave in metals and its dependence on elastic-plastic properties, phase transitions, spall and shear fractures,” Journal of Physics: Conference Series, vol. 490, no. 1, Article ID 012191, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. A. V. Shutov, V. G. Sultanov, and S. V. Dudin, “Mathematical modeling of converging detonation waves at multipoint initiation,” Journal of Physics: Conference Series, vol. 774, no. 1, Article ID 012075, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. J. D. Colton, Measurement of Pressure, Impulse and Detonation Velocity for Detasheet L Explosive, 1971.
  18. C. Li, B. Li, J. Y. Huang et al., “Spall damage of a mild carbon steel: effects of peak stress, strain rate and pulse duration,” Materials Science and Engineering: A, vol. 660, pp. 139–147, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Mirmomeni, A. Heidarpour, X.-L. Zhao, C. R. Hutchinson, J. A. Packer, and C. Wu, “Fracture behaviour and microstructural evolution of structural mild steel under the multi-hazard loading of high-strain-rate load followed by elevated temperature,” Construction and Building Materials, vol. 122, pp. 760–771, 2016. View at Publisher · View at Google Scholar
  20. A. Remennikov, T. Ngo, D. Mohotti, and atal, “Experimental investigation and simplified modeling of response of steel plates subjected to close-in blast loading from spherical liquid explosive charges,” International Journal of Impact Engineering, vol. 101, pp. 78–89, 2017. View at Publisher · View at Google Scholar
  21. J. Mescall and R. Papirno, “Spallation in cylinder-plate impact,” Experimental Mechanics, vol. 14, no. 7, pp. 257–266, 1974. View at Publisher · View at Google Scholar · View at Scopus
  22. F. S. Koslan, M. Z. Othman, A. Mujahid, and A. Zaidi, “Finite element analysis's interrelationship equation to predict the deflection of rolled homogeneous armor steel plate due to explosion based on different explosive masses and plate thicknesses,” Modern Applied Science, vol. 9, no. 4, pp. 178–185, 2015. View at Publisher · View at Google Scholar
  23. V. Aune, G. Valsamos, F. Casadei, M. Larcher, M. Langseth, and T. Børvik, “Numerical study on the structural response of blast-loaded thin aluminium and steel plates,” International Journal of Impact Engineering, vol. 99, pp. 131–144, 2017. View at Publisher · View at Google Scholar