Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 7150472, 10 pages
Research Article

Research on the Field Dynamic Balance Technologies for Large Diesel Engine Crankshaft System

College of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin 300222, China

Correspondence should be addressed to Shihai Zhang; moc.361@77ykhsz

Received 15 June 2017; Revised 29 August 2017; Accepted 18 September 2017; Published 18 October 2017

Academic Editor: Mahmoud Bayat

Copyright © 2017 Shihai Zhang and Zimiao Zhang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. W. Lanchester, Valve-gear of internal-combustion engines, United States Patent, US19110668055(1911).
  2. M. Ishikawa, Y. Nakamura, N. Kodama, and H. Hosoi, “Development of resin gear balance shaft system for 2AZ-FE engine,” Jsae Review, vol. 23, no. 1, pp. 27–32, 2002. View at Google Scholar
  3. W.-X. Fan, B.-C. Zhang, X.-D. Zhang, and G.-T. Yang, “Optimum of the balance mechanism for a four-cylinder in-line diesel engine,” Chinese Internal Combustion Engine Engineering, vol. 28, no. 3, pp. 52–54, 2007. View at Google Scholar · View at Scopus
  4. V. P. Solferino, Internal combustion engine with dynamic balancing system, United States Patent, US20090504699 (2009).
  5. S. C. Sajdowitz, C. D. Thorn, J. T. Bykowski, T. W. Leroy, and R. W. Albert, “Single cylinder balance system,” European Patent Applications, vol. EP2977644, 2015. View at Google Scholar
  6. M. Q. Sun and Y. F. Fang, “Study on shaking force balance of internal combustion engines by total mass center displacement method,” Journal of Northern Jiaotong University, vol. 24, no. 4, pp. 87–90, 2000. View at Google Scholar
  7. X. J. Sun, K. Q. Li, and X. F. Wang, “Study on an eccentric slide block balancing mechanism in a single-cylinder engine,” Journal of Sound and vibration, vol. 26, no. 7, pp. 97–100, 2007. View at Google Scholar
  8. Y. Yilmaz and G. Anlas, “An investigation of the effect of counterweight configuration on main bearing load and crankshaft bending stress,” Advances in Engineering Software, vol. 40, no. 2, pp. 95–104, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Yang, Z. Hao, and G. Zheng, “Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod,” Transactions of Tianjin University, vol. 15, no. 4, pp. 255–259, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. C. Q. Liu and R. L. Huston, “Theoretical and practical aspects for balancing crankshafts of six-cylinder V60 degree engines,” International Journal of Vehicle Noise and Vibration, vol. 7, no. 1, pp. 68–89, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. C.-J. Kim, Y. J. Kang, B.-H. Lee, and H.-J. Ahn, “Determination of optimal position for both support bearing and unbalance mass of balance shaft,” Mechanism and Machine Theory, vol. 50, pp. 150–158, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Karabulut, “Dynamic model of a two-cylinder four-stroke internal combustion engine and vibration treatment,” International Journal of Engine Research, vol. 13, no. 6, pp. 616–627, 2012. View at Google Scholar
  13. J. Huo, H. Wu, W. Sun, J. Chen, and L. Wang, “Improved design of the transmission mechanism of the of 4-cylinder double-acting Stirling engine,” Journal of Vibroengineering, vol. 17, no. 2, pp. 643–654, 2015. View at Google Scholar
  14. D. Ipci and H. Karabulut, “Thermodynamic and dynamic modeling of a single cylinder four stroke diesel engine,” Applied Mathematical Modelling, vol. 40, no. 5-6, pp. 3925–3937, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. R. D. Tang, Y. L. Xu, B. F. Zu, J. Liu, C. L. Hao, and D. S. Li, “Theoretical analysis of balancing of the offset crankshaft 3-cylinder engine,” Chinese Internal Combustion Engine Engineering, vol. 37, no. 4, pp. 92–96, 2016. View at Google Scholar
  16. Y. Kang, Y.-P. Chang, M.-H. Tseng, P.-H. Tang, and Y.-F. Chang, “Modified approach based on influence coefficient method for balancing crank-shafts,” Journal of Sound and Vibration, vol. 234, no. 2, pp. 277–296, 2000. View at Publisher · View at Google Scholar · View at Scopus
  17. W. G. Liu, F. Dong, and D. W. Zhao, “New concept for the balance of the second-harmonic inertia forces in an in-line, four-cylinder diesel engine,” Internal Combustion Engines, vol. 18, no. 3, pp. 7-8, 2003. View at Google Scholar
  18. S. Zhang and Y. Cai, “A new double-face online dynamic balance device and its control system for high speed machine tool spindle,” Journal of Vibration and Control, vol. 22, no. 4, pp. 1037–1048, 2016. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  19. Z. B. Hu, M. X. Xu, G. D. Jiang, and D. S. Zhang, “Analysis of non-stationary signal of a sudden unbalanced spindle based on wavelet noise reduction and short-time Fourier transformation,” Journal of Vibration and Shock, vol. 33, no. 5, pp. 20–23, 2014. View at Google Scholar
  20. Y. Liao, G. Lang, F. Wu, and L. Qu, “An improvement to holospectrum based field balancing method by reselection of balancing object,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 131, no. 3, pp. 987–1002, 2009. View at Google Scholar