Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 7246356, 10 pages
https://doi.org/10.1155/2017/7246356
Research Article

Experimental Study on Vibration Reduction Characteristics of Gear Shafts Based on ISFD Installation Position

Beijing Key Laboratory of Health Monitoring and Self-Recovery for High-End Mechanical Equipment, Beijing University of Chemical Technology, Beijing 100029, China

Correspondence should be addressed to Lidong He; moc.361@eh3691

Received 25 August 2017; Accepted 28 November 2017; Published 19 December 2017

Academic Editor: Marc Thomas

Copyright © 2017 Kaihua Lu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Zhou, W. Sun, and G. Liu, “Review of vibration and noise in gear reducer,” Journal of Mechanical Transmission, vol. 38, no. 6, pp. 163–170, 2014 (Chinese). View at Google Scholar
  2. K. Ding, X. Zhu, and Y. Chen, “The vibration characteristics of typical gearbox faults and its diagnosis plan,” Journal of Vibration and Shock, vol. 20, no. 3, pp. 7–12, 2001. View at Google Scholar · View at Scopus
  3. G. Wang, P. Sun, and K. Fang, “A research on the reduction of vibration and noise of the gearbox by using damping alloys,” Journal of Jiangsu University of Science and Technology (Natural Science Edition), vol. 8, no. 3, pp. 14–20, 1994. View at Google Scholar
  4. C. Gu and X. Wu, “Passive vibration damping technology of gear,” Machinery Design & Manufacture, vol. 9, pp. 74–76, 2010. View at Google Scholar
  5. Z. Youchen, Research on Vibration Reliability And Vibration Damping Strategy with Modification of Gears, Northeastern University, Shenyang, China, 2010. View at Publisher · View at Google Scholar
  6. B. Mao, L. Lin, and T. Cao, “Study on reducing vibration and noise of the gear transmissions by using damped ring,” Machine Design and Research, vol. 21, no. 1, pp. 47–49, 2005. View at Google Scholar
  7. Q.-Y. Wang, D.-Q. Cao, and J.-B. Yang, “Axial vibration reduction characteristics of a gear system with a damping ring,” Journal of Vibration and Shock, vol. 32, no. 6, pp. 190–194, 2013. View at Google Scholar · View at Scopus
  8. J. Vance, F. Zeidan, and B. Murphy, Machinery Vibration and Rotordynamics, John Wiley & Sons, Inc, 2010.
  9. C.-S. Chen, S. Natsiavas, and H. D. Nelson, “Coupled lateral-torsional vibration of a gear-pair system supported by a squeeze film damper,” Journal of Vibration and Acoustics, vol. 120, no. 4, pp. 860–867, 1998. View at Publisher · View at Google Scholar · View at Scopus
  10. C. Chen, S. Natsiavas, and H. D. Nelson, “Stability analysis and complex dynamics of a gear-pair system supported by a squeeze film damper,” Journal of Vibration and Acoustics, vol. 119, no. 1, pp. 85–88, 1997. View at Publisher · View at Google Scholar
  11. C.-W. Chang-Jian, “Bifurcation and chaos analysis of the porous squeeze film damper mounted gear-bearing system,” Computers & Mathematics with Applications, vol. 64, no. 5, pp. 798–812, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Ertas, V. Cerny, J. Kim, and V. Polreich, “Stabilizing A 46 MW multi-stage utility steam turbine using integral squeeze film bearing support dampers,” in Proceedings of the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (GT '14), Düsseldorf, Germany, June 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. O. De Santiago and L. S. Andrés, “Dynamic response of a rotor-integral squeeze film damper to couple imbalances,” in Proceedings of the ASME Turbo Expo 2000: Power for Land, Sea, and Air (GT '00), Munich, Germany, May 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Zhu, J. Lou, Q. He, and X. Weng, Vibration Theory and Vibration Isolation, National Defense Industry Press, 2006. View at Publisher · View at Google Scholar
  15. O. C. De Santiago and L. A. San Andrés, “Imbalance response and damping force coefficients of a rotor supported on end sealed integral squeeze film dampers,” in Proceedings of the ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition (GT '99), Indianapolis, IN, USA, June 1999. View at Publisher · View at Google Scholar · View at Scopus
  16. O. De Santiago, L. San Andrés, and J. Oliveras, “Imbalance response of a rotor supported on open-ends integral squeeze film dampers,” Journal of Engineering for Gas Turbines and Power, vol. 121, no. 4, pp. 718–724, 1999. View at Publisher · View at Google Scholar · View at Scopus
  17. K. Ding, W. Li, and X. Zhu, Gears and Gearbox Fault Diagnosis Practical Technology, China Machine Press, 2005.