Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 7982170, 12 pages
https://doi.org/10.1155/2017/7982170
Research Article

A Study on the Dynamic Behaviour of Lightweight Gears

Department of Mechanical, Energy and Management Engineering, Università della Calabria, 87036 Rende, Italy

Correspondence should be addressed to Domenico Mundo; ti.lacinu@odnum.ocinemod

Received 3 August 2017; Accepted 7 September 2017; Published 16 October 2017

Academic Editor: Matteo Filippi

Copyright © 2017 Shadi Shweiki et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Li, “Experimental investigation and FEM analysis of resonance frequency behavior of three-dimensional, thin-walled spur gears with a power-circulating test rig,” Mechanism and Machine Theory, vol. 43, no. 8, pp. 934–963, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. F. L. Litvin and A. Fuentes, Gear Geometry and Applied Theory, Cambridge University Press, Cambridge, UK, 2004. View at Publisher · View at Google Scholar
  3. T. J. Lin, H. Ou, and R. F. Li, “A finite element method for 3D static and dynamic contact/impact analysis of gear drives,” Computer Methods Applied Mechanics and Engineering, vol. 196, no. 9–12, pp. 1716–1728, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. J. A. Korta and D. Mundo, “Multi-objective micro-geometry optimization of gear tooth supported by response surface methodology,” Mechanism and Machine Theory, vol. 109, pp. 278–296, 2017. View at Publisher · View at Google Scholar · View at Scopus
  5. G. W. Blankenship and A. Kahraman, “Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearity,” Journal of Sound and Vibration, vol. 185, no. 5, pp. 743–765, 1995. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Bonori, M. Barbieri, and F. Pellicano, “Optimum profile modifications of spur gears by means of genetic algorithms,” Journal of Sound and Vibration, vol. 313, no. 3–5, pp. 603–616, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. G. Liu and R. G. Parker, “Nonlinear dynamics of idler gear systems,” Nonlinear Dynamics, vol. 53, no. 4, pp. 345–367, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. L. Zhang, Y. Wang, K. Wu, and R. Sheng, “Three-Dimensional Modeling and Structured Vibration Modes of Two-Stage Helical Planetary Gears Used in Cranes,” Shock and Vibration, vol. 2017, Article ID 9864959, 2017. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Dong, Y. Cao, and Z. Fang, “Dynamic Vibration Characteristic Analysis for the Power-Split Transmission System Based on Loaded Tooth Contact Analysis,” Shock and Vibration, vol. 2015, Article ID 871894, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Cai, “Simulation on the rotational vibration of helical gears in consideration of the tooth separation phenomenon (a new stiffness function of helical involute tooth pair),” Journal of Mechanical Design, vol. 117, no. 3, pp. 460–469, 1995. View at Publisher · View at Google Scholar · View at Scopus
  11. C. G. Cooley, C. Liu, X. Dai, and R. G. Parker, “Gear tooth mesh stiffness: A comparison of calculation approaches,” Mechanism and Machine Theory, vol. 105, pp. 540–553, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. W. Yang and D. Jiang, “An improved rigid multibody model for the dynamic analysis of the planetary gearbox in a wind turbine,” Shock and Vibration, vol. 2016, Article ID 9742673, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Palermo, D. Mundo, R. Hadjit, and W. Desmet, “Multibody element for spur and helical gear meshing based on detailed three-dimensional contact calculations,” Mechanism and Machine Theory, vol. 62, pp. 13–30, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Andersson and L. Vedmar, “A dynamic model to determine vibrations in involute helical gears,” Journal of Sound and Vibration, vol. 260, no. 2, pp. 195–212, 2003. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Fernandez Del Rincon, F. Viadero, M. Iglesias, P. García, A. De-Juan, and R. Sancibrian, “A model for the study of meshing stiffness in spur gear transmissions,” Mechanism and Machine Theory, vol. 61, pp. 30–58, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. B. Guilbert, P. Velex, D. Dureisseix, and P. Cutuli, “A Mortar-Based Mesh Interface for Hybrid Finite-Element/Lumped-Parameter Gear Dynamic Models - Applications to Thin-Rimmed Geared Systems,” Journal of Mechanical Design, vol. 138, no. 12, Article ID 123301, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Ren, S. Chang, G. Liu, L. Wu, and T. C. Lim, “Impedance synthesis based vibration analysis of geared transmission system,” Shock and Vibration, vol. 2017, Article ID 4846532, 14 pages, 2017. View at Publisher · View at Google Scholar
  18. J. D. Smith, Gear Noise and Vibration, Cambridge, 2003.