Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 9864959, 18 pages
https://doi.org/10.1155/2017/9864959
Research Article

Three-Dimensional Modeling and Structured Vibration Modes of Two-Stage Helical Planetary Gears Used in Cranes

1School of Mechanical Engineering, Shandong University, Jinan, China
2Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Ministry of Education, Jinan, China
3Weichai Power Co., Ltd., Weifang, China

Correspondence should be addressed to Yong Wang; moc.361@368ywem

Received 9 September 2016; Revised 26 November 2016; Accepted 22 December 2016; Published 27 February 2017

Academic Editor: Francesco Ripamonti

Copyright © 2017 Lina Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Sondkar and A. Kahraman, “A dynamic model of a double-helical planetary gear set,” Mechanism and Machine Theory, vol. 70, pp. 157–174, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Kahraman, “Natural modes of planetary gear trains,” Journal of Sound and Vibration, vol. 173, no. 1, pp. 125–130, 1994. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Lin and R. G. Parker, “Analytical characterization of the unique properties of planetary gear free vibration,” Journal of Vibration and Acoustics, vol. 121, no. 3, pp. 316–321, 1999. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Lin and R. G. Parker, “Structured vibration characteristics of planetary gears with unequally spaced planets,” Journal of Sound and Vibration, vol. 233, no. 5, pp. 921–928, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Lin and R. G. Parker, “Sensitivity of planetary gear natural frequencies and vibration modes to model parameters,” Journal of Sound and Vibration, vol. 228, no. 1, pp. 109–128, 1999. View at Publisher · View at Google Scholar · View at Scopus
  6. T. Eritenel and R. G. Parker, “Modal properties of three-dimensional helical planetary gears,” Journal of Sound and Vibration, vol. 325, no. 1-2, pp. 397–420, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. Sheng, J. Tang, S. Chen, and Z. Hu, “Modal analysis of double-helical planetary gears with numerical and analytical approach,” Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, vol. 137, no. 4, Article ID 041012, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. P.-Y. Qian, Y.-L. Zhang, G. Cheng, S.-R. Ge, and C.-F. Zhou, “Model analysis and verification of 2K-H planetary gear system,” Journal of Vibration and Control, vol. 21, no. 10, pp. 1946–1957, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  9. V. Abousleiman and P. Velex, “A hybrid 3D finite element/lumped parameter model for quasi-static and dynamic analyses of planetary/epicyclic gear sets,” Mechanism and Machine Theory, vol. 41, no. 6, pp. 725–748, 2006. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  10. L. Zhang, Y. Wang, K. Wu, R. Sheng, and Q. Huang, “Dynamic modeling and vibration characteristics of a two-stage closed-form planetary gear train,” Mechanism and Machine Theory, vol. 97, pp. 12–28, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. C. G. Cooley and R. G. Parker, “Vibration properties of high-speed planetary gears with gyroscopic effects,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 134, no. 6, Article ID 61014, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. X. Gu and P. Velex, “A lumped parameter model to analyse the dynamic load sharing in planetary gears with planet errors,” Applied Mechanics and Materials, vol. 86, pp. 374–379, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Chen and Y. Shao, “Dynamic features of a planetary gear system with tooth crack under different sizes and inclination angles,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 135, no. 3, Article ID 031004, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. X. Gu and P. Velex, “On the dynamic simulation of eccentricity errors in planetary gears,” Mechanism and Machine Theory, vol. 61, pp. 14–29, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Yang and P. Yang, “Random vibration analysis of planetary gear trains,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 135, no. 2, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. D. Qin, Z. Zhou, J. Yang, and H. Chen, “Time-dependent reliability analysis of gear transmission system of wind turbine under stochastic wind load,” Journal of Mechanical Engineering, vol. 48, no. 3, pp. 1–8, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. V. K. Ambarisha and R. G. Parker, “Nonlinear dynamics of planetary gears using analytical and finite element models,” Journal of Sound and Vibration, vol. 302, no. 3, pp. 577–595, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. X. Wu and R. G. Parker, “Modal properties of planetary gears with an elastic continuum ring gear,” Journal of Applied Mechanics, Transactions ASME, vol. 75, no. 3, 12 pages, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Cunliffe, J. D. Smith, and D. B. Welbourn, “DYNAMIC TOOTH LOADS IN EPICYCLIC GEARS.,” J Eng Ind Trans ASME, vol. 96, no. 2, pp. 578–584, 1974. View at Publisher · View at Google Scholar · View at Scopus
  20. J. G. Wang, Y. Wang, Y. Y. An, and Q. L. Huang, “Sensitivity analysis of natural frequency to structural parameters of helical gear shaft for wind turbine gearbox,” Applied Mechanics and Materials, vol. 86, pp. 380–383, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Kahraman, “Dynamic analysis of a multi-mesh helical gear train,” Journal of Mechanical Design, Transactions Of the ASME, vol. 116, no. 3, pp. 706–712, 1994. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Kahraman, H. N. Ozguven, D. R. Houser, and J. J. Zakrajsek, “Dynamic analysis of geared rotors by finite elements,” Journal of Mechanical Design—Transactions of the ASME, vol. 114, no. 3, pp. 507–514, 1992. View at Publisher · View at Google Scholar · View at Scopus
  23. L. Vedmar and B. Henriksson, “A general approach for determining dynamic forces in spur gears,” Journal of Mechanical Design, Transactions of the ASME, vol. 120, no. 4, pp. 593–598, 1998. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Baud and P. Velex, “Static and dynamic tooth loading in spur and helical geared systems-experiments and model validation,” Journal of Mechanical Design, Transactions of the ASME, vol. 124, no. 2, pp. 334–346, 2002. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Fernandez Del Rincon, F. Viadero, M. Iglesias, P. García, A. De-Juan, and R. Sancibrian, “A model for the study of meshing stiffness in spur gear transmissions,” Mechanism and Machine Theory, vol. 61, pp. 30–58, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Gradu, K. Langenbeck, and B. Breunig, “Planetary gears with improved vibrational behaviour in automatic transmissions,” VDI BERICHTE, vol. 1230, pp. 861–882, 1996. View at Google Scholar
  27. V. Abousleiman, P. Velex, and S. Becquerelle, “Modeling of spur and helical gear planetary drives with flexible ring gears and planet carriers,” Journal of Mechanical Design, Transactions of the ASME, vol. 129, no. 1, pp. 95–106, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Kubur, A. Kahraman, D. M. Zini, and K. Kienzle, “Dynamic analysis of a multi-shaft helical gear transmission by finite elements: model and experiment,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 126, no. 3, pp. 398–406, 2004. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Al-Shyyab and A. Kahraman, “Non-linear dynamic analysis of a multi-mesh gear train using multi-term harmonic balance method: period-one motions,” Journal of Sound and Vibration, vol. 284, no. 1-2, pp. 151–172, 2005. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Al-Shyyab and A. Kahraman, “Non-linear dynamic analysis of a multi-mesh gear train using multi-term harmonic balance method: sub-harmonic motions,” Journal of Sound and Vibration, vol. 279, no. 1-2, pp. 417–451, 2005. View at Publisher · View at Google Scholar · View at Scopus
  31. A. Al-shyyab and A. Kahraman, “A non-linear dynamic model for planetary gear sets,” Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, vol. 221, no. 4, pp. 567–576, 2007. View at Publisher · View at Google Scholar · View at Scopus
  32. Z. Chen, Y. Shao, and D. Su, “Dynamic simulation of planetary gear set with flexible spur ring gear,” Journal of Sound and Vibration, vol. 332, no. 26, pp. 7191–7204, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. M. Chapron, P. Velex, J. Bruyère, and S. Becquerelle, “Optimization of profile modifications with regard to dynamic tooth loads in single and double-helical planetary gears with flexible ring-gears,” Journal of Mechanical Design, Transactions of the ASME, vol. 138, no. 2, Article ID 023301, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. T. M. Ericson and R. G. Parker, “Planetary gear modal vibration experiments and correlation against lumped-parameter and finite element models,” Journal of Sound and Vibration, vol. 332, no. 9, pp. 2350–2375, 2013. View at Publisher · View at Google Scholar · View at Scopus
  35. A. Kahraman, “Planetary gear train dynamics,” Journal of Mechanical Design, Transactions Of the ASME, vol. 116, no. 3, pp. 713–720, 1994. View at Publisher · View at Google Scholar · View at Scopus