Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018 (2018), Article ID 1461086, 10 pages
https://doi.org/10.1155/2018/1461086
Research Article

Initial Investigation of Energy Finite Element Validation on High-Frequency Flexural Vibration of Stiffened Thin Orthotropic Plates

1School of Mechanical and Electrical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
2State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an 710049, China

Correspondence should be addressed to Lixia Li; moc.361@81_ileij

Received 1 September 2017; Revised 16 January 2018; Accepted 13 February 2018; Published 26 March 2018

Academic Editor: Matteo Filippi

Copyright © 2018 Miaoxia Xie et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Vlahopoulos and S. M. Lee, “Energy finite element analysis,” in Engineering Vibroacoustic Analysis: Methods and Applications, S. A. Hambric, S. H. Sung, and D. J. Nefske, Eds., chapter 14, Wiley, 2016. View at Google Scholar
  2. D. J. Nefske and S. H. Sung, “Power flow finite element analysis of dynamic systems: basic theory and application to beams,” ASME Transaction, Journal of Vibration, Acoustics Stress And Reliability in Design, vol. 111, no. 1, pp. 94–99, 1989. View at Google Scholar
  3. O. M. Bouthier and R. J. Bernhard, “Models of space-averaged energetics of plates,” AIAA Journal, vol. 30, no. 3, pp. 616–623, 1992. View at Publisher · View at Google Scholar · View at Scopus
  4. X. Y. Yan, “Energy finite element analysis development for high frequency vibration analysis if composite structures,” in Naval Architecture and Marine Engineering, The University of Michigan, Ann Arbor, MI, USA, 2008. View at Google Scholar
  5. S. M. Lee, “Energy finite element method for high frequency vibration analysis of composite rotorcraft structures,” in Mechanical engineering, p. 108, University of Michigan, Ann Arbor, MI, USA, 2010. View at Google Scholar
  6. Z.-Y. Cai, W.-Y. Tang, and S.-K. Zhang, “Application of energy finite element method in vibration analysis of coupled composite laminated beam structures,” Journal of Vibration and Shock, vol. 29, no. 10, pp. 23–27, 2010 (Chinese). View at Google Scholar
  7. P. E. Cho, Energy Flow Analysis of Coupled Structures [PhD Thesis], Purdue University, West Lafayette, IN, USA, 1993.
  8. R. J. Bernhard and J. E. Huff, “Structural-acoustic design at high frequency using the energy finite element method,” Journal of Vibration and Acoustics, vol. 121, no. 3, pp. 295–301, 1999. View at Publisher · View at Google Scholar · View at Scopus
  9. R. S. Langley and K. H. Heron, “Elastic wave transmission through plate/beam junctions,” Journal of Sound and Vibration, vol. 143, no. 2, pp. 241–253, 1990. View at Publisher · View at Google Scholar · View at Scopus