Research Article
Model-Based Analysis of Spur Gears’ Dynamic Behavior in the Presence of Multiple Cracks
Table 1
Gear parameters used [
3].
| Parameter | Pinion | Gear |
| Number of teeth | 25 | 30 | Gear type | Standard involute (full-depth teeth) | Material | Steel | Pressure angle (degree) | 20 | Face width (mm) | 20 | Module (mm) | 2 | Elastic modulus (N/m2) | | Poisson's ratio | 0.3 | Contact ratio | 1.63 | Crack propagation angle (degrees) | 20 | Fillet radius (mm) | 0.4 | Backup ratio | 3.3 | Crack thickness (mm) | 0.01 | Crack width (mm) | 20 | Total length of the crack path (mm) | 3.8 |
|
|