Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018 (2018), Article ID 4179312, 13 pages
https://doi.org/10.1155/2018/4179312
Research Article

Effect of Axial Vibration on Sliding Frictional Force between Shale and 45 Steel

1State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China
2Department of Mechanical Engineering, The University of Melbourne, Melbourne, VIC 3010, Australia

Correspondence should be addressed to Chen Ping; nc.ude.upws@gnipnehc and Liu Yang; moc.361@upws3102gnayuil

Received 17 October 2017; Accepted 25 December 2017; Published 24 January 2018

Academic Editor: Marc Thomas

Copyright © 2018 Wu Hao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. R. Newman, T. G. Burnett, J. C. Pursell, and O. Gouasmia, “Modeling the affect of a downhole vibrator,” in Proceedings of the The SPE/ICoTA Coiled Tubing Well Intervention Conference and Exhibition. Society of Petroleum Engineers, 31 March-1, Woodlands, Tex, USA, 2009.
  2. R. Gee, C. Hanley, R. Hussain, L. Canuel, and J. Martinez, “Axial oscillation tools vs. Lateral vibration tools for friction reductionewhat’s the best way to shake the pipe,” in Proceedings of the SPE/IADC Drilling Conference and Exhibition, Society of Petroleum Engineers, London, UK, 2015. View at Publisher · View at Google Scholar
  3. P. Chen, D. Gao, Z. Wang, and W. Huang, “Study on aggressively working casing string in extended-reach well,” Journal of Petroleum Science and Engineering, vol. 157, pp. 604–616, 2017. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Liu, P. Chen, X. Wang, and T. Ma, “Modeling friction-reducing performance of an axial oscillation tool using dynamic friction model,” Journal of Natural Gas Science and Engineering, vol. 33, pp. 397–404, 2016. View at Publisher · View at Google Scholar
  5. X. Wang, P. Chen, T. Ma, and Y. Liu, “Modeling and experimental investigations on the drag reduction performance of an axial oscillation tool,” Journal of Natural Gas Science and Engineering, vol. 39, pp. 118–132, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. H. T. K. Roberto, S. A. D. Abdullah, G. K. Waleed, and H. E. D. Abdelsattar, “Successful application of new sliding technology for horizontal drilling in Saudi Arabia,” Saudi Aramco Journal of Technology, pp. 28–33, 2011. View at Google Scholar
  7. R. Samuel, “Friction factors: what are they for torque, drag, vibration, bottom hole assembly and transient surge/swab analyses?” Journal of Petroleum Science and Engineering, vol. 73, no. 3-4, pp. 258–266, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Xu, H. Niu, H. Tang, and X. Zhang, “Application of hydraulic oscillators to the development of Well Xinsha 21-28H in the Xinchang Gas Field, western Sichuan Basin,” Natural Gas Industry, vol. 33, no. 3, pp. 64–67, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Pohlman and E. Lehfeldt, “Influence of ultrasonic vibration on metallic friction,” Ultrasonics, vol. 4, no. 4, pp. 178–185, 1966. View at Publisher · View at Google Scholar
  10. K. Grudziński and R. Kostek, “Influence of normal micro-vibrations in contact on sliding motion of solid body,” Journal of Theoretical and Applied Mechanics, vol. 43, no. 1, pp. 37–49, 2005. View at Google Scholar
  11. W. F. Roper and T. B. Dellinger, “Reduction of the Frictional Coefficient in a Borehole by the Use of Vibration, 1983”.
  12. N. Wicks, J. A. Pabon, F. M. Auzerais et al., “Modeling of axial vibrations to allow intervention in extended reach wells,” in Proceedings of the SPE Deepwater Drilling and Completions Conference, Galveston, Tex, USA, 2012. View at Publisher · View at Google Scholar
  13. N. Wicks, J. A. Pabon, and A. S. Zheng, “Modeling and field trials of the effective tractoring force of axial vibration tools,” in Proceedings of the SPE Deepwater Drilling and Completions Conference, Galveston, Tex, USA, 2014. View at Publisher · View at Google Scholar
  14. E. R. Barakat, S. Miska, Y. Mengjlao, P.-A. Simionescu, and N. Takach, “The effect of hydraulic vibrations on initiation of buckling and axial force transfer for helically buckled pipes at simulated horizontal wellbore conditions,” in Proceedings of the SPE/IADC Drilling Conference and Exhibition 2007, pp. 254–261, February 2007. View at Scopus
  15. P. R. Dahl, “Solid friction damping of mechanical vibrations,” AIAA Journal, vol. 14, no. 12, pp. 1675–1682, 1976. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Dupont, B. Armstrong, and V. Hayward, “Elasto-plastic friction model: contact compliance and stiction,” in Proceedings of 2000 American Control Conference (ACC 2000), pp. 1072–1077 vol.2, Chicago, IL, USA, June 2000. View at Publisher · View at Google Scholar
  17. P. Dupont, V. Hayward, B. Armstrong, and F. Altpeter, “Single state elastoplastic friction models,” Institute of Electrical and Electronics Engineers Transactions on Automatic Control, vol. 47, no. 5, pp. 787–792, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  18. C. Canudas de Wit, H. Olsson, K. J. Astrom, and P. Lischinsky, “A new model for control of systems with friction,” Institute of Electrical and Electronics Engineers Transactions on Automatic Control, vol. 40, no. 3, pp. 419–425, 1995. View at Publisher · View at Google Scholar · View at MathSciNet
  19. J. Swevers, F. Al-Bender, C. G. Ganseman, and T. Prajogo, “An integrated friction model structure with improved presliding behavior for accurate friction compensation,” Institute of Electrical and Electronics Engineers Transactions on Automatic Control, vol. 45, no. 4, pp. 675–686, 2000. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  20. F. Al-Bender, V. Lampaert, and J. Swevers, “The generalized Maxwell-slip model: a novel model for friction simulation and compensation,” Institute of Electrical and Electronics Engineers Transactions on Automatic Control, vol. 50, no. 11, pp. 1883–1887, 2005. View at Publisher · View at Google Scholar · View at MathSciNet
  21. W. Littmann, H. Storck, and J. Wallaschek, “Sliding friction in the presence of ultrasonic oscillations: Superposition of longitudinal oscillations,” Archive of Applied Mechanics, vol. 71, no. 8, pp. 549–554, 2001. View at Publisher · View at Google Scholar · View at Scopus
  22. W. Littmann, H. Storck, J. Wallaschek, and D. J. Inman, “Reduction of friction using piezoelectrically excited ultrasonic vibrations,” in Proceedings of the SPIE's 8th Annual International Symposium on Smart Structures and Materials, pp. 302–311, Billingham, Washington, DC, USA, 2001. View at Publisher · View at Google Scholar
  23. M. Leus and P. Gutowski, “Analysis of longitudinal tangential contact vibration effect on friction force using coulomb and dahl models,” Journal of Theoretical and Applied Mechanics, vol. 46, no. 1, pp. 171–184, 2008. View at Google Scholar · View at Scopus
  24. P. Gutowski and M. Leus, “The effect of longitudinal tangential vibrations on friction and driving forces in sliding motion,” Tribology International, vol. 55, pp. 108–118, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Wang, H. Ni, R. Wang, Z. Li, and Y. Wang, “Experimental investigation of the effect of in-plane vibrations on friction for different materials,” Tribology International, vol. 99, pp. 237–247, 2016. View at Publisher · View at Google Scholar · View at Scopus
  26. V. L. Popov, Contact Mechanics and Friction: Physical Principles and Applications, Springer, Berlin, Germany, 2010.
  27. P. Flandrin, G. Rilling, and P. Gonçalvés, “Empirical mode decomposition as a filter bank,” IEEE Signal Processing Letters, vol. 11, no. 2, pp. 112–114, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Mohanty, K. K. Gupta, K. S. Raju, A. Singh, and S. Snigdha, “Vibro acoustic signal analysis in fault finding of bearing using empirical mode decomposition,” in Proceedings of the 2013 International Conference on Advanced Electronic Systems, ICAES 2013, pp. 29–33, September 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Liu, P. Chen, T. Ma, and X. Wang, “An evaluation method for friction-reducing performance of hydraulic oscillator,” Journal of Petroleum Science and Engineering, vol. 157, pp. 107–116, 2017. View at Publisher · View at Google Scholar · View at Scopus