Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018, Article ID 4507879, 15 pages
https://doi.org/10.1155/2018/4507879
Research Article

Detection of Delamination in Laminate Wind Turbine Blades Using One-Dimensional Wavelet Analysis of Modal Responses

Department of Mechatronics and High Voltage Engineering, Faculty of Electrical and Control Engineering, Gdansk University of Technology, Gdansk, Poland

Correspondence should be addressed to Łukasz Doliński; lp.ude.gp@iksnilod.zsakul

Received 27 October 2017; Accepted 30 January 2018; Published 1 March 2018

Academic Editor: Rafał Burdzik

Copyright © 2018 Łukasz Doliński et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H.-J. Wagner and J. Mathur, Introduction to Wind Energy Systems – Basics, Technology and Operation, Springer, 2009.
  2. A. Ayub, W. Siew, and S. MacGregor, “External lightning protection system for wind turbine blades – further considerations,” in Proceedings of the Asia-Pacific International Conference on Lightning (APL), Nagoya, Japan, 2015.
  3. B. F. Sørensen, E. Jørgensen, C. P. Debel et al., “Improved design of large wind turbine blade of fibre composites based on studies of scale effects (Phase 1) Summary Report,” 2004.
  4. G. R. Kirikera, M. J. Schulz, and M. J. Sundaresan, “Multiple damage identification on a wind turbine blade using a structural neural system,” in Proceedings of the SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, USA, 2007.
  5. M. J. Schulz and M. J. Sundaresan, “Smart sensor system for structural condition monitoring of wind turbines,” Tech. Rep. NREL/SR-500-40089, National Renewable Energy Laboratory, 2006. View at Google Scholar
  6. M. J. Sundaresan, M. J. Schulz, and A. Ghoshal, “Structural health monitoring static test of a wind turbine blade,” Tech. Rep. NREL/SR-500-28719, National Renewable Energy Laboratory, 2002. View at Google Scholar
  7. M. Sundaresan, M. Schulz, and A. Ghoshal, “Intelligent blade for wind turbines,” in Proceedings of the 39th AIAA/ASME Aerospace Sciences Meeting and Exhibit, Wind Energy Symposium, Reno, NV, USA, 2001.
  8. J. Gieske and M. Rumsey, “Non-destructive Evaluation (NDE) Of Composite/Metal Bond Interface Of A Wind Turbine Blade Using An Acousto-ultrasonic Technique,” in Proceedings of the AIAA Aerospace Sciences Meeting, pp. 249–254, 1997.
  9. A. Katunin, M. Dańczak, and P. Kostka, “Automated identification and classification of internal defects in composite structures using computed tomography and 3D wavelet analysis,” Archives of Civil and Mechanical Engineering, vol. 15, no. 2, pp. 436–448, 2015. View at Publisher · View at Google Scholar
  10. A. G. Beattie and M. Rumsey, “Non-destructive evaluation of wind turbine blades using an infrared camera,” in Proceedings of the ASME Wind Energy Symposium, 18th Aerospace Sciences Meeting and Exhibit, 1999.
  11. G. M. Smith, B. R. Clayton, A. G. Dutton, and A. D. Irving, “Infra-red thermography for condition monitoring of composite wind turbine blades feasibility studies using cyclic loading tests,” in Proceedings of the 15th British Wind Energy Association Conference, York, UK, 1993.
  12. J. Wei and J. McCarty, “Acoustic emission evaluation of composite wind turbine blades during fatigue testing,” Wind Engineering, vol. 17, no. 6, pp. 266–274, 1993. View at Google Scholar · View at Scopus
  13. H. Sutherland, A. Beattie, B. Hansche et al., The Application of Non- Destructive Techniques to the Testing of a Wind Turbine Blade, Sandia National Laboratories, 1993.
  14. A. G. Beattie, “Acoustic emission monitoring of a wind turbine blade during a fatigue test,” in Proceedings of the AIAA Aerospace Sciences Meeting, 1997.
  15. M. J. Blanch and A. G. Dutton, “Acoustic emission monitoring of field tests of an operating wind turbine,” Key Engineering Materials, vol. 245-246, pp. 475–480, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. J.-T. Kim, Y.-S. Ryu, H.-M. Cho, and N. Stubbs, “Damage identification in beam-type structures: frequency-based method vs mode-shape-based method,” Engineering Structures, vol. 25, no. 1, pp. 57–67, 2003. View at Publisher · View at Google Scholar · View at Scopus
  17. L. M. Khoo, P. R. Mantena, and P. Jadhav, “Structural damage assessment using vibration modal analysis,” Structural Health and Monitoring, vol. 3, no. 2, pp. 177–194, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Aoki and O.-I. Byon, “Damage detection of CFRP pipes and shells by using localized flexibility method,” Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials, vol. 10, no. 2-3, pp. 189–198, 2001. View at Publisher · View at Google Scholar · View at Scopus
  19. N.-G. Park and Y.-S. Park, “Identification of damage on a substructure with measured frequency response functions,” Journal of Mechanical Science and Technology, vol. 19, no. 10, pp. 1891–1901, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. A. Furukawa, H. Otsuka, and J. Kiyono, “Structural damage detection method using uncertain frequency response functions,” Computer-Aided Civil and Infrastructure Engineering, vol. 21, no. 4, pp. 292–305, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Radzieński, Ł. Doliński, M. Krawczuk, and M. Palacz, “Damage localisation in a stiffened plate structure using a propagating wave,” Mechanical Systems and Signal Processing, vol. 39, no. 1-2, pp. 388–395, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Sierra-Pérez, M. A. Torres-Arredondo, and A. Güemes, “Damage and nonlinearities detection in wind turbine blades based on strain field pattern recognition. FBGs, OBR and strain gauges comparison,” Composite Structures, vol. 135, pp. 156–166, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. P. Pratumnopharat, P. S. Leung, and R. S. Court, “Wavelet transform-based stress-time history editing of horizontal axis wind turbine blades,” Journal of Renewable Energy, vol. 63, pp. 558–575, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Katunin, “Stone impact damage identification in composite plates using modal data and quincunx wavelet analysis,” Archives of Civil and Mechanical Engineering, vol. 15, no. 1, pp. 251–261, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Katunin and P. Przystałka, “Damage assessment in composite plates using fractional wavelet transform of modal shapes with optimized selection of spatial wavelets,” Engineering Applications of Artificial Intelligence, vol. 30, pp. 73–85, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. A. Katunin, “Vibration-based spatial damage identification in honeycomb-core sandwich composite structures using wavelet analysis,” Composite Structures, vol. 118, pp. 385–391, 2014. View at Publisher · View at Google Scholar
  27. A. Banerjee and G. Pohit, “Crack investigation of rotating cantilever beam by fractal dimension analysis,” in Proceedings of the 2nd International Conference on Innovations in Automation and Mechatronics Engineering, ICIAME, 2014.
  28. J.-H. Chou and J. Ghaboussi, “Genetic algorithm in structural damage detection,” Computers & Structures, vol. 79, no. 14, pp. 1335–1353, 2001. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Raich and T. Liszkai, “Benefits of implicit redundant genetic algorithms for structural damage detection in noisy environments,” in Proceedings of the Lecture Notes in Computer Science - GECCO, Berlin, Germany, 2003.
  30. C. Y. Kao and S.-L. Hung, “Detection of structural damage via free vibration responses generated by approximating artificial neural networks,” Computers & Structures, vol. 81, no. 28-29, pp. 2631–2644, 2003. View at Publisher · View at Google Scholar · View at Scopus
  31. Q. Chen, Y. W. Chan, and K. Worden, “Structural fault diagnosis and isolation using neural networks based on response-only data,” Computers & Structures, vol. 81, no. 22-23, pp. 2165–2172, 2003. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Zak, M. Krawczuk, and W. Ostachowicz, “Numerical and experimental investigation of free vibration of multilayer delaminated composite beams and plates,” Computational Mechanics, vol. 26, no. 3, pp. 309–315, 2000. View at Publisher · View at Google Scholar · View at Scopus
  33. C. N. Della and D. Shu, “Free vibration analysis of composite beams with overlapping delaminations,” European Journal of Mechanics - A/Solids, vol. 24, no. 3, pp. 491–503, 2005. View at Publisher · View at Google Scholar · View at Scopus
  34. W. Sprenger, F. Gruttmann, and W. Wagner, “Delamination growth analysis in laminated structures with continuum-based 3D-shell elements and a viscoplastic softening model,” Computer Methods Applied Mechanics and Engineering, vol. 185, no. 2-4, pp. 123–139, 2000. View at Publisher · View at Google Scholar · View at Scopus
  35. O. Allix and P. Ladevèze, “Interlaminar interface modelling for the prediction of delamination,” Composite Structures, vol. 22, no. 4, pp. 235–242, 1992. View at Publisher · View at Google Scholar · View at Scopus
  36. L. Daudeville, O. Allix, and P. Ladevèze, “Delamination analysis by damage mechanics: Some applications,” Composites Part B: Engineering, vol. 5, no. 1, pp. 17–24, 1995. View at Publisher · View at Google Scholar · View at Scopus
  37. S. N. Wosu, D. Hui, and P. K. Dutta, “Dynamic mixed-mode I/II delamination fracture and energy release rate of unidirectional graphite/epoxy composites,” Engineering Fracture Mechanics, vol. 72, no. 10, pp. 1531–1558, 2005. View at Publisher · View at Google Scholar · View at Scopus
  38. S. V. Kulkarni and D. Frederick, “Frequency as a Parameter in Delamination Problems—A Preliminary Investigation,” Journal of Composite Materials, vol. 5, no. 1, pp. 112–117, 1971. View at Publisher · View at Google Scholar · View at Scopus
  39. S. Keshava Kumar, R. Ganguli, and D. Harursampath, “Partial delamination modeling in composite beams using a finite element method,” Finite Elements in Analysis and Design, vol. 76, pp. 1–12, 2013. View at Publisher · View at Google Scholar · View at Scopus
  40. M. Marjanović and D. Vuksanović, “Layerwise solution of free vibrations and buckling of laminated composite and sandwich plates with embedded delaminations,” Composite Structures, vol. 108, no. 1, pp. 9–20, 2014. View at Publisher · View at Google Scholar · View at Scopus
  41. D. Li and F. Zhang, “Full extended layerwise method for the simulation of laminated composite plates and shells,” Computers & Structures, vol. 187, 2017. View at Google Scholar
  42. M. Krawczuk, W. Ostachowicz, and A. Zak, “Dynamics of cracked composite material structures,” Computational Mechanics, vol. 20, no. 1-2, pp. 79–83, 1997. View at Publisher · View at Google Scholar · View at Scopus
  43. S. G. Mallat, “Theory for multiresolution signal decomposition: the wavelet representation,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 11, no. 7, pp. 674–693, 1989. View at Publisher · View at Google Scholar · View at Scopus
  44. I. Daubechies, Ten Lectures on Wavelets, Society for Industrial and Applied Mathematics, 1992.
  45. M. Rucka and K. Wilde, “Application of continuous wavelet transform in vibration based damage detection method for beams and plates,” Journal of Sound and Vibration, vol. 297, no. 3–5, pp. 536–550, 2006. View at Publisher · View at Google Scholar · View at Scopus