Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018, Article ID 4756352, 10 pages
Research Article

Seismic Capacity Assessment of Confined Brick Masonry Building: An Experimental Approach

1Department of Civil Engineering, University of Engineering & Technology, Peshawar, Pakistan
2Department of Civil Engineering, Islamic University of Madinah, Medina, Saudi Arabia

Correspondence should be addressed to Asfandyar Ahmed; moc.liamg@9002raydnafsargne

Received 22 July 2017; Accepted 3 January 2018; Published 30 January 2018

Academic Editor: Giuseppe Brandonisio

Copyright © 2018 Asfandyar Ahmed et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Tomazevic, Earthquake-Resistant Design of Masonry Buildings, Imperial College Press, London, UK, 1999.
  2. D. Anderson and S. Brzev, “Seismic Design Guide for Masonry Buildings,” 2009.
  3. S. Brzev, Earthquake-Resistant Confined Masonry Construction, National Information Center of Earthquake Engineering, Indian Institute of Technology Kanpur, 2008.
  4. K. Yoshimura, K. Kikuchi, M. Kuroki et al., “Experimental study for developing higher seismic performance of brick masonry walls,” in Proceedings of the 13th World conference on earthquake engineering, Vancouver, Canada, 2004.
  5. B. Calderoni, P. Lenza, and P. P. Rossi, “Pushover tests on intermediate-scale model of masonry buildings with rigid floor,” The Masonry Society Journal, vol. 22, no. 1, pp. 71–85, 2004. View at Google Scholar
  6. G. S. Epperson and D. P. Abrams, “Nondestructive evaluation of masonry buildings,” Tech. Rep. 89-26-0389-26-03, College of Engineering, University of Illinois at Urbana-Champaign, Advanced Construction Technology Center, Urbana, Ill, USA, 1989. View at Google Scholar
  7. D. P. Abrams and N. Shah, “Cyclic load testing of unreinforced masonry walls,” Advanced Construction Technology Center 92-26-10, College of Engineering, and University of Illinois at Urbana-Champaign, Advanced Construction Technology Center, and Urbana, 1992. View at Google Scholar
  8. G. Magenes and G. M. Calvi, “Cyclic behavior of brick masonry walls,” in Proceedings of the 10th World Conf. on Earthquake Engineering, pp. 3517–3522, Madrid, Spain, 1992.
  9. A. Anthoine, G. Magonette, and G. Magenes, “Shear compression testing and analysis of brick masonry walls,” in Proceedings of the 10th European Conf. on Earthquake Engineering, Taylor and Francis, pp. 1657–1662, Taylor and Francis, Rotterdam, The Netherlands, 1995.
  10. T. Manzouri, P. B. Shing, B. Amadei, M. Schuller, and R. Atkinson, “Repair and retrofit of unreinforced masonry walls: experimental evaluation and finite element analysis,” Tech. Rep. CU/SR-95/2, Dept. of Civil, Environmental, and Architectural Engineering, University of Colorado, Boulder, Colo, USA, 1995. View at Google Scholar
  11. M. Tomaževič, M. Lutman, and L. Petković, “Seismic behavior of masonry walls: Experimental simulation,” Journal of Structural Engineering, vol. 122, no. 9, pp. 1040–1047, 1996. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Craig, B. Goodno, P. Towashiraporn, and J. Park, “Fragility reduction estimations for URM buildings using response modification,” in Proceedings of the 12th European Conf. on Earthquake Engineering Research, London, UK, 2002.
  13. S. Franklin, J. Lynch, and D. P. Abrams, Performance of rehabilitated URM shear walls: flexural behavior of piers,” (CD-ROM) Mid-America Earthquake Center, University of Illinois at Urbana-Champaign, Urbana, Ill, USA, 2003.
  14. C. Simsir, M. Aschheim, and D. Abrams, “Influence of diaphragm flexibility on the outof- plane response of unreinforced masonry bearing walls,” in Proceedings of the 9th North American Masonry Conference (CD-ROM), Clemson, 2002.
  15. K. Shahzada, A. N. Khan, A. S. Elnashai et al., “Experimental seismic performance evaluation of unreinforced brick masonry buildings,” Earthquake Spectra, vol. 28, no. 3, pp. 1269–1290, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Ashraf, Development of Cost-effective and Efficient Retrofitting Technique for Masonry Buildings in Pakistan [Ph.D. thesis], Department of Civil Engineering, UET, Peshawar, Pakistan, 2010.
  17. A. Zeeshan, S. Khan, C. Bora et al., “Seismic capacity assessment of unreinforced concrete block masonry buildings in pakistan before and after retrofitting,” Journal of Earthquake Engineering, vol. 19, no. 3, pp. 357–382, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Magenes and G. M. Calvi, “In-plane seismic response of brick masonry walls,” Earthquake Engineering and Structural Dynamics, vol. 26, no. 11, pp. 1091–1112, 1997. View at Google Scholar