Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018, Article ID 5981089, 12 pages
https://doi.org/10.1155/2018/5981089
Research Article

Bearing Diagnostics of Hydro Power Plants Using Wavelet Packet Transform and a Hidden Markov Model with Orbit Curves

1Universidade de São Paulo, São Paulo, SP, Brazil
2Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil

Correspondence should be addressed to Gabriel Pino; rb.psu@onip.leirbag

Received 15 August 2017; Revised 23 November 2017; Accepted 11 December 2017; Published 2 January 2018

Academic Editor: Marc Thomas

Copyright © 2018 Gabriel Pino et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. U. Seidel, C. Mende, B. Hübner, W. Weber, and A. Otto, “Dynamic loads in Francis runners and their impact on fatigue life,” in Proceedings of the 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014, Canada, September 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. X. Liu, Y. Luo, and Z. Wang, “A review on fatigue damage mechanism in hydro turbines,” Renewable & Sustainable Energy Reviews, vol. 54, pp. 1–14, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Coutu, M. Gagnon, and C. Monette, Life Assessment of Francis Runners Using Strain Gage Site Measurements, Waterpower XV, TN, Chattanooga, 2007.
  4. V. Iliev, P. Popovski, and Z. Markov, “Transient phenomena analysis in hydroelectric power plants at off-design operating conditions,” International Journal of Engineering Research and Applications (IJERA), vol. 2, 2012. View at Google Scholar
  5. X. Huang, J. Chamberland-Lauzon, C. Oram, A. Klopfer, and N. Ruchonnet, “Fatigue analyses of the prototype Francis runners based on site measurements and simulations,” in Proceedings of the 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014, Canada, September 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. T. P. Hara, L. F. L. Vianna, E. E. Nachvalger, and E. Goncalves, “Valuation about remaining service life of GBM hydraulic power plant units technical and economical aspects,” in Proceedings of the IEEE 4th International Conference on Properties and Applications of Dielectric Materials, pp. 804–806, July 1994. View at Scopus
  7. U. Dorji and R. Ghomashchi, “Hydro turbine failure mechanisms: An overview,” Engineering Failure Analysis, vol. 44, pp. 136–147, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. K. C. Anup, B. Thapa, and Y.-H. Lee, “Transient numerical analysis of rotor–stator interaction in a Francis turbine,” Journal of Renewable Energy, vol. 65, pp. 227–235, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. D. Goyal and B. S. Pabla, “Condition based maintenance of machine tools—a review,” CIRP Journal of Manufacturing Science and Technology, vol. 10, pp. 24–35, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Goyal and B. S. Pabla, “The vibration monitoring methods and signal processing techniques for structural health monitoring: a review,” Archives of Computational Methods in Engineerin: State-of-the-Art Reviews, vol. 23, no. 4, pp. 585–594, 2016. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  11. P. Pennacchi and A. Vania, “Model based analysis of steam-whip instability onsets occurred in a power plant,” in Proceedings of the 2009 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009, pp. 1025–1032, USA, September 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. P. Pennacchi and A. Vania, “Analysis of the instability phenomena caused by steam in high-pressure turbines,” Shock and Vibration, vol. 18, no. 4, pp. 593–612, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Dong, S. Yin, B. Tang, L. Chen, and T. Luo, “Bearing degradation process prediction based on the support vector machine and Markov model,” Shock and Vibration, vol. 2014, Article ID 717465, 15 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. C. Trivedi, B. Gandhi, and C. J. Michel, “Effect of transients on Francis turbine runner life: A review,” Journal of Hydraulic Research, vol. 51, no. 2, pp. 121–132, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. E. J. Siragusa and I. Galton, “Gain error correction technique for pipelined analogue-to-digital converters,” IEEE Electronics Letters, vol. 36, no. 7, pp. 617-618, 2000. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Conforti, M. Brenci, A. Mencaglia, and A. G. Mignani, “Fiber optic vibration sensor for remote monitoring in high power electric machines,” Applied Optics, vol. 28, no. 23, pp. 5158–5161, 1989. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Fang, “Whittaker-Kotelnikov-Shannon sampling theorem and aliasing error,” Journal of Approximation Theory, vol. 85, no. 2, pp. 115–131, 1996. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  18. P. L. Butzer, G. Schmeisser, and R. L. Stens, “An Introduction to Sampling Analysis,” in Nonuniform Sampling, pp. 17–121, Springer, Berlin, Germany, 2001. View at Google Scholar · View at MathSciNet
  19. Z. Peng, F. Chu, and Y. He, “Vibration signal analysis and feature extraction based on reassigned wavelet scalogram,” Journal of Sound and Vibration, vol. 253, no. 5, pp. 1087–1100, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. W. J. Wang and P. D. McFadden, “Application of wavelets to gear box vibration signals for fault detection,” Journal of Sound and Vibration, vol. 192, no. 5, pp. 927–939, 1996. View at Publisher · View at Google Scholar · View at Scopus
  21. B. R. Murphy and I. Watanabe, “Digital shaping filters for reducing machine vibration,” IEEE Transactions on Robotics and Automation, vol. 8, no. 2, pp. 285–289, 1992. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Wang, Z. He, and Y. Zi, “Enhancement of signal denoising and multiple fault signatures detecting in rotating machinery using dual-tree complex wavelet transform,” Mechanical Systems and Signal Processing, vol. 24, no. 1, pp. 119–137, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. X.-S. Si, W. Wang, C.-H. Hu, and D.-H. Zhou, “Remaining useful life estimation---a review on the statistical data driven approaches,” European Journal of Operational Research, vol. 213, no. 1, pp. 1–14, 2011. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  24. T. T. Le, F. Chatelain, and C. Berenguer, “Hidden markov models for diagnostics and prognostics of systems under multiple deterioration modes,” in Proceedings of the in European Safety and Reliability Conference-ESREL, 2014, pp. 1197–1204, 2014.
  25. H. Jiang, J. Chen, and G. Dong, “Hidden Markov model and nuisance attribute projection based bearing performance degradation assessment,” Mechanical Systems and Signal Processing, vol. 72-73, pp. 184–205, 2016. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Yu, “Health condition monitoring of machines based on hidden markov model and contribution analysis,” IEEE Transactions on Instrumentation and Measurement, vol. 61, no. 8, pp. 2200–2211, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Yuwono, Y. Qin, J. Zhou, Y. Guo, B. G. Celler, and S. W. Su, “Automatic bearing fault diagnosis using particle swarm clustering and Hidden Markov Model,” Engineering Applications of Artificial Intelligence, 2015. View at Publisher · View at Google Scholar
  28. T. Boutros and M. Liang, “Detection and diagnosis of bearing and cutting tool faults using hidden Markov models,” Mechanical Systems and Signal Processing, vol. 25, no. 6, pp. 2102–2124, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. L. R. Rabiner, “Tutorial on hidden Markov models and selected applications in speech recognition,” Proceedings of the IEEE, vol. 77, no. 2, pp. 257–286, 1989. View at Publisher · View at Google Scholar · View at Scopus
  30. F. Jelinek, “Continuous Speech Recognition by Statistical Methods,” Proceedings of the IEEE, vol. 64, no. 4, pp. 532–556, 1976. View at Publisher · View at Google Scholar · View at Scopus
  31. L. R. Rabiner and B.-H. Juang, “An introduction to hidden Markov models,” IEEE ASSP Magazine, vol. 3, no. 1, pp. 4–16, 1986. View at Publisher · View at Google Scholar · View at Scopus
  32. Y. Xu, A. Xu, and T. Xie, “Two General Architectures for Intelligent Machine Performance Degradation Assessment,” Shock and Vibration, vol. 2015, Article ID 676959, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. G. F. Wang, X. L. Feng, and C. Liu, “Bearing fault classification based on conditional random field,” Shock and Vibration, vol. 20, no. 4, pp. 591–600, 2013. View at Publisher · View at Google Scholar · View at Scopus
  34. ISO, “Mechanical vibration of non-reciprocating machinesΓ,” measurements on rotating shafts and evaluation criteria, vol. 5, no. ISO 7919-5, 1997. View at Google Scholar
  35. J. M. Robichaud and P. Eng, “Reference standards for vibration monitoring and analysis,” Bretech Engineering Ltd, vol. 70, 2009. View at Google Scholar
  36. A. K. S. Jardine, D. Lin, and D. Banjevic, “A review on machinery diagnostics and prognostics implementing condition-based maintenance,” Mechanical Systems and Signal Processing, vol. 20, no. 7, pp. 1483–1510, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. Z. Feng, M. Liang, and F. Chu, “Recent advances in time-frequency analysis methods for machinery fault diagnosis: a review with application examples,” Mechanical Systems and Signal Processing, vol. 38, no. 1, pp. 165–205, 2013. View at Publisher · View at Google Scholar · View at Scopus
  38. Z. H. Wu and N. E. Huang, “Ensemble empirical mode decomposition: a noise-assisted data analysis method,” Advances in Adaptive Data Analysis (AADA), vol. 1, no. 1, pp. 1–41, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. P. Boškoski, M. Gašperin, D. Petelin, and Đ. Juričić, “Bearing fault prognostics using Rényi entropy based features and Gaussian process models,” Mechanical Systems and Signal Processing, vol. 52-53, pp. 327–337, 2015. View at Publisher · View at Google Scholar
  40. D. Abboud, J. Antoni, S. Sieg-Zieba, and M. Eltabach, “Envelope analysis of rotating machine vibrations in variable speed conditions: A comprehensive treatment,” Mechanical Systems and Signal Processing, vol. 84, pp. 200–226, 2017. View at Publisher · View at Google Scholar · View at Scopus
  41. P. Borghesani, R. Ricci, S. Chatterton, and P. Pennacchi, “A new procedure for using envelope analysis for rolling element bearing diagnostics in variable operating conditions,” Mechanical Systems and Signal Processing, vol. 38, no. 1, pp. 23–35, 2013. View at Publisher · View at Google Scholar · View at Scopus
  42. Y. X. Wang, J. W. Xiang, R. Markert, and M. Liang, “Spectral kurtosis for fault detection, diagnosis and prognostics of rotating machines: a review with applications,” Mechanical Systems and Signal Processing, vol. 66-67, pp. 679–698, 2016. View at Publisher · View at Google Scholar · View at Scopus
  43. C. Mishra, A. K. Samantaray, and G. Chakraborty, “Rolling element bearing defect diagnosis under variable speed operation through angle synchronous averaging of wavelet de-noised estimate,” Mechanical Systems and Signal Processing, vol. 72-73, pp. 206–222, 2016. View at Publisher · View at Google Scholar · View at Scopus
  44. A. Tabrizi, L. Garibaldi, A. Fasana, and S. Marchesiello, “Early damage detection of roller bearings using wavelet packet decomposition, ensemble empirical mode decomposition and support vector machine,” Meccanica, vol. 50, no. 3, pp. 865–874, 2015. View at Publisher · View at Google Scholar · View at Scopus
  45. Z. Zhang, Y. Wang, and K. Wang, “Fault diagnosis and prognosis using wavelet packet decomposition, Fourier transform and artificial neural network,” Journal of Intelligent Manufacturing, vol. 24, no. 6, pp. 1213–1227, 2013. View at Publisher · View at Google Scholar · View at Scopus
  46. A. Alaswad and Y. Xiang, “A review on condition-based maintenance optimization models for stochastically deteriorating system,” Reliability Engineering & System Safety, vol. 157, pp. 54–63, 2017. View at Publisher · View at Google Scholar
  47. T. Welte, Deterioration and maintenance models for components in hydropower plants , Ph.D. dissertation [Ph.D. thesis], 2008.
  48. B. Rao, Handbook of Condition Monitoring, Elsevier, 1996.
  49. N. Kishor, R. P. Saini, and S. P. Singh, “A review on hydropower plant models and control,” Renewable & Sustainable Energy Reviews, vol. 11, no. 5, pp. 776–796, 2007. View at Publisher · View at Google Scholar · View at Scopus
  50. H. A. AL-Khazali, “Geometrical and Graphical Representations Analysis of Lissajous Figures in Rotor Dynamic System,” IOSR Journal Of Engineering, vol. 02, no. 05, pp. 971–978, 2012. View at Publisher · View at Google Scholar
  51. A. Muszynska, “Vibrational Diagnostics of Rotating Machinery Malfunctions,” International Journal of Rotating Machinery, vol. 1, no. 3-4, pp. 237–266, 1995. View at Publisher · View at Google Scholar · View at Scopus
  52. N. Bachschmid, P. Pennacchi, and A. Vania, “Diagnostic significance of orbit shape analysis and its application to improve machine fault detection,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 26, no. 2, pp. 200–208, 2004. View at Google Scholar · View at Scopus
  53. C. L. Prates and M. R. Siniscalchi, “Supervisory system for the turbine generator set of angra 1 npp,” in Proceedings of the International Nuclear Atlantic Conference (INAC, '09), p. 7, 2009.
  54. C. J. Moore, “Frequency response corrections for eddy correlation systems,” Boundary Layer Meteorology, vol. 37, no. 1-2, pp. 17–35, 1986. View at Publisher · View at Google Scholar · View at Scopus
  55. SKF, Eddy probe systems catalog, 2011.
  56. LionPrecision, Eddy current sensors for position and displacement with high speed and high resolution, 2016.
  57. J. A. Barnes and D. W. Allan, “A Statistical Model of Flicker Noise,” Proceedings of the IEEE, vol. 54, no. 2, pp. 176–178, 1966. View at Publisher · View at Google Scholar · View at Scopus
  58. T. B. Gabrielson, “Mechanical-thermal noise in micromachined acoustic and vibration sensors,” IEEE Transactions on Electron Devices, vol. 40, no. 5, pp. 903–908, 1993. View at Publisher · View at Google Scholar · View at Scopus
  59. N. Tandon and A. Choudhury, “Review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings,” Tribology International, vol. 32, no. 8, pp. 469–480, 1999. View at Publisher · View at Google Scholar · View at Scopus
  60. C. Kar and A. R. Mohanty, “Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transform,” Journal of Sound and Vibration, vol. 311, no. 1-2, pp. 109–132, 2008. View at Publisher · View at Google Scholar · View at Scopus
  61. N. Singer, W. Singhose, and W. Seering, “Comparison of filtering methods for reducing residual vibration,” European Journal of Control, vol. 5, no. 2-4, pp. 208–218, 1999. View at Publisher · View at Google Scholar · View at Scopus
  62. Z. Yan, A. Miyamoto, and Z. Jiang, “Frequency slice wavelet transform for transient vibration response analysis,” Mechanical Systems and Signal Processing, vol. 23, no. 5, pp. 1474–1489, 2009. View at Publisher · View at Google Scholar · View at Scopus
  63. W. E. Back, W. W. Boles, and G. T. Fry, “Defining triangular probability distributions from historical cost data,” Journal of Construction Engineering and Management, vol. 126, no. 1, pp. 29–37, 2000. View at Publisher · View at Google Scholar · View at Scopus
  64. D. Dubois, L. Foulloy, G. Mauris, and H. Prade, “Probability-possibility transformations, triangular fuzzy sets, and probabilistic inequalities,” Reliable Computing, vol. 10, no. 4, pp. 273–297, 2004. View at Publisher · View at Google Scholar · View at Scopus
  65. F. Jelinek, Statistical Methods for Speech Recognition, MIT press, UK, 1997.
  66. B.-H. Juang, “On the hidden Markov model and dynamic time warping for speech recognition---a unified view,” Bell Laboratories Technical Journal, vol. 63, no. 7, pp. 1213–1243, 1984. View at Publisher · View at Google Scholar · View at MathSciNet
  67. S. E. Levinson, “Structural Methods in Automatic Speech Recognition,” Proceedings of the IEEE, vol. 73, no. 11, pp. 1625–1650, 1985. View at Publisher · View at Google Scholar · View at Scopus
  68. J. Makhoul, S. Roucos, and H. Gish, “Vector quantization in speech coding,” Proceedings of the IEEE, vol. 73, no. 11, pp. 1551–1588, 1985. View at Publisher · View at Google Scholar · View at Scopus
  69. F. J. Harris, “On the use of windows for harmonic analysis with the discrete Fourier transform,” Proceedings of the IEEE, vol. 66, no. 1, pp. 51–83, 1978. View at Publisher · View at Google Scholar · View at Scopus
  70. Y. Hu and P. C. Loizou, “Evaluation of objective quality measures for speech enhancement,” IEEE Transactions on Audio, Speech and Language Processing, vol. 16, no. 1, pp. 229–238, 2008. View at Publisher · View at Google Scholar · View at Scopus
  71. T. M. Welte, J. Vatn, and J. Heggset, “Markov state model for optimization of maintenance and renewal of hydro power components,” in Proceedings of the 2006 9th International Conference on Probabilistic Methods Applied to Power Systems, PMAPS, Sweden, June 2006. View at Publisher · View at Google Scholar · View at Scopus
  72. S.-Z. Yu, “Hidden semi-Markov models,” Artificial Intelligence, vol. 174, no. 2, pp. 215–243, 2010. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  73. L. Himmelmann, Hmm—Hidden Markov Models, vol. 1 of R Package Version, 2010.
  74. Y. Ephraim and N. Merhav, “Hidden Markov processes,” Institute of Electrical and Electronics Engineers Transactions on Information Theory, vol. 48, no. 6, pp. 1518–1569, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus