Research Article
Analysis of Dynamic Characteristics of Grease-Lubricated Tapered Roller Bearings
Table 1
Geometry, material and rheological parameters.
| Parameter | Value |
| Number of rollers | 17 | Roller length le/mm | 42.06 | Roller-end sphere radius rs/mm | 136.20 | Diameter of roller large end dl/mm | 17.85 | Diameter of roller small end ds/mm | 24.76 | Outer contact angle/deg | 15 | Inner contact angle/deg | 5 | Flange contact angle/deg | 83 | Outer raceway radius/mm | 99.52 | Inner raceway radius/mm | 78.48 | Guide land clearance/mm | 0.5 | Guide land width/mm | 4.93 | Cage outer diameter/mm | 205.76 | Cage inner diameter/mm | 196.10 | Cage thickness hs/mm | 5 | Pocket clearance Δδ/mm | 0.27 | Elastic modulus of roller/race/GPa | 205 | Poisson’s ratio of roller/race | 0.3 | Elastic modulus of cage/GPa | 8.3 | Poisson’s ratio of cage | 0.28 |
| Grease rheological parameters (30°C) | Yield stress τy/Pa | 351.8 | Plastic viscosity φ/Pa·sn | 8.44 | Power law exponent n | 0.7196 | Pressure-viscosity coefficient α/m2·N−11 | 4.662 × 10−8 |
|
|