Vibrations of Flat-End Cutter Entering Workpiece Process: Modeling, Simulations, and Experiments

Table 2

Cutting conditions for the cutting force coefficients identification.

Test No.	Milling type	Radial depth of cut ae (mm)	Axial depth of cut ap (mm)	Feed per tooth fz (mm/tooth)	Spindle speed (rpm)
1	Down/slotting	10	0.6	0.03	1000
2	Down/slotting	10	0.6	0.04	1000
3	Down/slotting	10	0.6	0.06	1000
4	Down/slotting	10	0.6	0.08	1000
5	Down/slotting	10	0.6	0.10	1000