Research Article
Vibrations of Flat-End Cutter Entering Workpiece Process: Modeling, Simulations, and Experiments
Table 4
Cutting conditions for a cutter entering from the workpiece boundary.
| Test No. | Milling type | Radial depth of cut ae (mm) | Axial depth of cut ap (mm) | Feed per tooth fz (mm/tooth) | Spindle speed |
| 1 | Down | 12 | 0.2 | 0.05 | 1000 | 2 | Down | 12 | 0.4 | 0.05 | 1000 | 3 | Down | 12 | 0.6 | 0.05 | 1000 | 4 | Down | 8 | 1 | 0.04 | 1000 | 5 | Down | 8 | 1 | 0.10 | 1000 | 6 | Down | 5 | 1.6 | 0.05 | 1000 | 7 | Down | 5 | 0.8 | 0.08 | 1000 | 8 | Down | 3 | 1.5 | 0.12 | 1000 |
|
|