Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018, Article ID 9385171, 10 pages
https://doi.org/10.1155/2018/9385171
Research Article

The Feasibility of Using Laser Doppler Vibrometer Measurements from a Passing Vehicle for Bridge Damage Detection

School of Civil Engineering, University College Dublin, Dublin 4, Ireland

Correspondence should be addressed to Daniel Martinez; ei.dcu@oretozenitram.leinad

Received 24 January 2018; Accepted 8 April 2018; Published 16 May 2018

Academic Editor: Luca Z. Fragonara

Copyright © 2018 Abdollah Malekjafarian et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Horberry, M. Halliday, and A. G. Gale, “Bridge strike reduction: optimising the design of markings,” Accident Analysis & Prevention, vol. 34, no. 5, pp. 581–588, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. G. Hearn and R. B. Testa, “Modal analysis for damage detection in structures,” Journal of Structural Engineering, vol. 117, no. 10, pp. 3042–3063, 1991. View at Publisher · View at Google Scholar
  3. M. Mehrjoo, N. Khaji, H. Moharrami, and A. Bahreininejad, “Damage detection of truss bridge joints using Artificial Neural Networks,” Expert Systems with Applications, vol. 35, no. 3, pp. 1122–1131, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. P. C. Pandey and S. V. Barai, “Multilayer perceptron in damage detection of bridge structures,” Computers & Structures, vol. 54, no. 4, pp. 597–608, 1995. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Park, C.-B. Yun, Y. Roh, and J.-J. Lee, “PZT-based active damage detection techniques for steel bridge components,” Smart Materials and Structures, vol. 15, no. 4, pp. 957–966, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. C. K. Soh, K. K.-H. Tseng, S. Bhalla, and A. Gupta, “Performance of smart piezoceramic patches in health monitoring of a RC bridge,” Smart Materials and Structures, vol. 9, no. 4, pp. 533–542, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. W. Fan and P. Qiao, “Vibration-based damage identification methods: a review and comparative study,” Structural Health Monitoring, vol. 10, no. 1, pp. 83–111, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Sumitoro, Y. Matsui, M. Kono, T. Okamoto, and K. Fujii, “Long span bridge health monitoring system in Japan,” in Proceedings of the 6th Annual International Symposium on NDE for Health Monitoring and Diagnostics, pp. 517–524, Newport Beach, Calif, USA, 2001.
  9. I. N. Robertson, “Prediction of vertical deflections for a long-span prestressed concrete bridge structure,” Engineering Structures, vol. 27, no. 12, pp. 1820–1827, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. J. M. Ko and Y. Q. Ni, “Technology developments in structural health monitoring of large-scale bridges,” Engineering Structures, vol. 27, no. 12, pp. 1715–1725, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. Y.-B. Yang, C. W. Lin, and J. D. Yau, “Extracting bridge frequencies from the dynamic response of a passing vehicle,” Journal of Sound and Vibration, vol. 272, no. 3-5, pp. 471–493, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. B. Yang and C. W. Lin, “Vehicle-bridge interaction dynamics and potential applications,” Journal of Sound and Vibration, vol. 284, no. 1-2, pp. 205–226, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Malekjafarian, P. J. McGetrick, and E. J. OBrien, “A review of indirect bridge monitoring using passing vehicles,” Shock and Vibration, vol. 2015, Article ID 286139, 16 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Sevillano, E. J. OBrien, and D. Martinez, “Instantaneous curvature in bridge damage detection,” in Proceedings of the CSHM-6: Structural Health Monitoring of New and Ageing Infrastructure, 8 pages, Queens University, Belfast, UK, May 2016.
  15. F. Magalhães, Á. Cunha, and E. Caetano, “Dynamic monitoring of a long span arch bridge,” Engineering Structures, vol. 30, no. 11, pp. 3034–3044, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. J.-T. Kim and N. Stubbs, “Crack detection in beam-type structures using frequency data,” Journal of Sound and Vibration, vol. 259, no. 1, pp. 145–160, 2003. View at Publisher · View at Google Scholar · View at Scopus
  17. E. J. OBrien and A. Malekjafarian, “A mode shape-based damage detection approach using laser measurement from a vehicle crossing a simply supported bridge,” Structural Control and Health Monitoring, vol. 23, no. 10, pp. 1273–1286, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. B. Yang, Y. C. Li, and K. C. Chang, “Constructing the mode shapes of a bridge from a passing vehicle: a theoretical study,” Smart Structures and Systems, vol. 13, no. 5, pp. 797–819, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. Y. B. Yang and W.-F. Chen, “Extraction of bridge frequencies from a moving test vehicle by stochastic subspace identification,” Journal of Bridge Engineering, vol. 21, no. 3, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Nagayama, A. Reksowardojo, D. Su, and T. M. C. Zhang, “Bridge natural frequency estimation by extracting the common vibration component from the responses of two vehicles,” in Proceedings of the 6th International Conference on Advances in Experimental Structural Engineering, Urbana-Champaign, Ill, USA, 2015.
  21. A. González, E. J. OBrien, and P. J. McGetrick, “Identification of damping in a bridge using a moving instrumented vehicle,” Journal of Sound and Vibration, vol. 331, no. 18, pp. 4115–4131, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Malekjafarian and E. J. OBrien, “On the use of a passing vehicle for the estimation of bridge mode shapes,” Journal of Sound and Vibration, vol. 397, pp. 77–91, 2017. View at Publisher · View at Google Scholar · View at Scopus
  23. X. Kong, C. S. Cai, L. Deng, and W. Zhang, “Using dynamic responses of moving vehicles to extract bridge modal properties of a field bridge,” Journal of Bridge Engineering, vol. 22, no. 6, Article ID 04017018, 9 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus
  24. E. J. OBrien, A. Malekjafarian, and A. González, “Application of empirical mode decomposition to drive-by bridge damage detection,” European Journal of Mechanics—A/Solids, vol. 61, pp. 151–163, 2017. View at Publisher · View at Google Scholar · View at Scopus
  25. D. Hester and A. González, “A discussion on the merits and limitations of using drive-by monitoring to detect localised damage in a bridge,” Mechanical Systems and Signal Processing, vol. 90, pp. 234–253, 2017. View at Publisher · View at Google Scholar · View at Scopus
  26. P. J. McGetrick, D. Hester, and S. E. Taylor, “Implementation of a drive-by monitoring system for transport infrastructure utilising smartphone technology and GNSS,” Journal of Civil Structural Health Monitoring, vol. 7, no. 2, pp. 175–189, 2017. View at Publisher · View at Google Scholar · View at Scopus
  27. C. Kim, K. Chang, S. Inoue, S. Hasegawa, and P. McGetrick, “Investigating feasibility of drive-by bridge monitoring by laboratory experiments,” in Proceedings of the 24th Australian Conference on the Mechanics of Structures and Materials (ACMSM '16), pp. 1477–1484, Perth, Australia, 2016.
  28. A. Elhattab, N. Uddin, and E. OBrien, “Drive-by bridge damage monitoring using Bridge Displacement Profile Difference,” Journal of Civil Structural Health Monitoring, vol. 6, no. 5, pp. 839–850, 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. E. J. OBrien, D. Martinez, A. Malekjafarian, and E. Sevillano, “Damage detection using curvatures obtained from vehicle measurements,” Journal of Civil Structural Health Monitoring, vol. 7, no. 3, pp. 333–341, 2017. View at Publisher · View at Google Scholar · View at Scopus
  30. E. J. OBrien, E. Sevillano, and D. Martinez, “Monitoring the condition of a bridge using a traffic speed deflectometer vehicle travelling at highway speed,” in Proceedings of the in 3rd International Balkans Conference on Challenges of Civil Engineering, pp. 107–115, Tirana, Albania, 2016.
  31. G. W. Flintsch, B. Ferne, B. Diefenderfer, S. Katicha, J. Bryce, and S. Nell, “Evaluation of traffic speed continuous deflection devices,” in Proceedings of the 91st Annual Meeting of Transportation Research Board, Transport Research Board, Washington, DC, USA, 2012.
  32. S. Rasmussen, J. A. Krarup, and G. Hildebrand, “Non-contact deflection measurement at high speed,” in Proceedings of the 6th International Conference on the Bearing Capacity of Roads, Railways and Airfields, 8 pages, Lisbon, Portugal, 2002.
  33. M. Majka and M. Hartnett, “Effects of speed, load and damping on the dynamic response of railway bridges and vehicles,” Computers & Structures, vol. 86, no. 6, pp. 556–572, 2008. View at Publisher · View at Google Scholar · View at Scopus
  34. R. Karoumi, Response of Cable-Stayed and Suspension Bridges to Moving Vehicles: Analysis Methods and Practical Modeling Techniques, Department of Structural Engineering, KTH Royal Institute of Technology, Stockholm, Sweden, 1998.
  35. F. Yang and G. A. Fonder, “An iterative solution method for dynamic response of bridge-vehicles systems,” Earthquake Engineering and Structural Dynamics, vol. 25, no. 2, pp. 195–215, 1996. View at Publisher · View at Google Scholar · View at Scopus
  36. R. W. Clough and J. Penzien, Dynamics of Structures, McGraw-Hill, Inc, New York, NY, USA, 1993.
  37. J. W. Tedesco, W. G. McDougal, and C. A. Ross, Structural Dynamics: Theory and Applications, Addison-Wesley, Montlo Park, Calif, USA, 1999.
  38. J. K. Sinha, M. I. Friswell, and S. Edwards, “Simplified models for the location of cracks in beam structures using measured vibration data,” Journal of Sound and Vibration, vol. 251, no. 1, pp. 13–38, 2002. View at Publisher · View at Google Scholar · View at Scopus
  39. F. N. Catbas, M. Gul, and J. L. Burkett, “Conceptual damage-sensitive features for structural health monitoring: laboratory and field demonstrations,” Mechanical Systems and Signal Processing, vol. 22, no. 7, pp. 1650–1669, 2008. View at Publisher · View at Google Scholar · View at Scopus
  40. W.-Y. He and S. Zhu, “Moving load-induced response of damaged beam and its application in damage localization,” Journal of Vibration and Control, vol. 22, no. 16, pp. 3601–3617, 2016. View at Publisher · View at Google Scholar · View at Scopus
  41. F. Tyan, Y. F. Hong, and S. H. Tu, “Generation of random road profiles,” International Journal of Advanced Engineering Technology, vol. 4, no. 2, pp. 1373–1378, 2009. View at Google Scholar
  42. A. González, E. Covián, M. Casero, and M. Celemín, “Evaluation of the true behavior of the end supports in the Carbajal de la Legua old bridge,” in Proceedings of the Istambul Bridge Conference, pp. 187–197, Istambul, Turkey, 2014.
  43. M. Johansmann, G. Siegmund, and M. Pineda, “Targeting the limits of laser Doppler vibrometry,” in Proceedings of the IDEMA, pp. 1–12, 2005.
  44. G. R. Rada, S. Nazarian, B. A. Visintine, R. V. Siddharthan, and N. Sivaneswaran, “Use of high-speed deflection devices in network-level PMS applications: are we ready?” in Proceedings of the 9th International Conference on Managing Pavement Assets, EEUU, Alexandria, Va, USA, 2015.
  45. P. Podder, T. Z. Khan, M. H. Khan, and M. M. Rahman, “Comparative performance analysis of hamming, hanning and blackman window,” International Journal of Computer Applications, vol. 96, no. 18, pp. 1–6, 2014. View at Google Scholar