Experimental Approach to Active Mounts Using Electromagnetic Actuator and Rubber with Consideration of Shock Resistance for Naval Shipboard Equipment

<table class="table-group" id="tab6"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left"> </td><td class="align_center">Suggested design</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Electrical gap</td><td class="align_center">40 mm</td></tr><tr><td class="align_left">Mechanical gap</td><td class="align_center">2 mm</td></tr><tr><td class="align_left">Coil specification</td><td class="align_center">Ø1.3 mm × 310 turns</td></tr><tr><td class="align_left">Weight</td><td class="align_center">Abt. 7.2 kg</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Design specification for suggested electromagnetic actuator.</div>

Shock and Vibration

tab6

Table 6

Table 6: Experimental Approach to Active Mounts Using Electromagnetic Actuator and Rubber with Consideration of Shock Resistance for Naval Shipboard Equipment 

Table 6 | Experimental Approach to Active Mounts Using Electromagnetic Actuator and Rubber with Consideration of Shock Resistance for Naval Shipboard Equipment 