Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2019, Article ID 9273714, 9 pages
https://doi.org/10.1155/2019/9273714
Research Article

Robust Optimum Design of Multiple Tuned Mass Dampers for Vibration Control in Buildings Subjected to Seismic Excitation

1Department of Mechanical Engineering, Federal University of Rio Grande do Sul, Porto Alegre, Brazil
2Department of Civil Engineering, Federal University of Santa Catarina, Florianópolis, Brazil

Correspondence should be addressed to Sergio Pastor Ontiveros-Pérez; rb.sgrfu@sorevitno.oigres

Received 31 August 2018; Revised 5 December 2018; Accepted 30 December 2018; Published 29 January 2019

Academic Editor: Gabriele Cazzulani

Copyright © 2019 Luciara Silva Vellar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Frahm, “Device for damping of bodies,” US Patent No 989, 1911.
  2. M. Dolce, D. Cardone, and F. C. Ponzo, “Shaking-table tests on reinforced concrete frames with different isolation systems,” Earthquake Engineering & Structural Dynamics, vol. 36, no. 5, pp. 573–596, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. Z.-D. Xu, H.-T. Zhao, and A.-Q. Li, “Optimal analysis and experimental study on structures with viscoelastic dampers,” Journal of Sound and Vibration, vol. 273, no. 3, pp. 607–618, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. Z.-D. Xu, “Earthquake mitigation study on viscoelastic dampers for reinforced concrete structures,” Journal of Vibration and Control, vol. 13, no. 1, pp. 29–43, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. W. L. Qu, Z. H. Chen, and Y. L. Xu, “Dynamic analysis of wind-excited truss tower with friction dampers,” Computers & Structures, vol. 79, no. 32, pp. 2817–2831, 2001. View at Publisher · View at Google Scholar · View at Scopus
  6. K.-W. Min, J.-Y. Seong, and J. Kim, “Simple design procedure of a friction damper for reducing seismic responses of a single-story structure,” Engineering Structures, vol. 32, no. 11, pp. 3539–3547, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Filiatrault, “Performance evaluation of friction damped braced steel frames under simulated earthquake loads,” M.S. thesis, University of British Columbia, Vancouver, BC, USA, 1985.
  8. L. F. F. Miguel, L. F. F. Miguel, and R. H. Lopez, “Robust design optimization of friction dampers for structural response control,” Structural Control and Health Monitoring, vol. 21, no. 9, pp. 1240–1251, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. L. F. F. Miguel, L. F. Fadel Miguel, and R. H. Lopez, “A firefly algorithm for the design of force and placement of friction dampers for control of man-induced vibrations in footbridges,” Optimization and Engineering, vol. 16, no. 3, pp. 633–661, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. L. F. F. Miguel, L. F. F. Miguel, and R. H. Lopez, “Simultaneous optimization of force and placement of friction dampers under seismic loading,” Engineering Optimization, vol. 48, no. 4, pp. 582–602, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. L. F. F. Miguel, L. F. F. Miguel, and R. H. Lopez, “Failure probability minimization of buildings through passive friction dampers,” Structural Design of Tall and Special Buildings, vol. 25, no. 17, pp. 869–885, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. S. P. Ontiveros-Pérez, L. F. F. Miguel, and L. F. F. Miguel, “A new assessment in the simultaneous optimization of friction dampers in plane and spatial civil structures,” Mathematical Problems in Engineering, vol. 2017, Article ID 6040986, 18 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus
  13. L. F. F. Miguel, L. F. Fadel Miguel, and R. H. Lopez, “Methodology for the simultaneous optimization of location and parameters of friction dampers in the frequency domain,” Engineering Optimization, vol. 50, no. 12, pp. 2108–2122, 2018. View at Publisher · View at Google Scholar · View at Scopus
  14. L. F. F. Miguel and J. D. Riera, “Controle de vibrações de estruturas utilizando amortecedores por atrito,” Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, vol. 8, no. 1, 2008. View at Google Scholar
  15. S. P. Ontiveros-Pérez, L. F. F. Miguel, and L. F. F. Miguel, “Optimization of location and forces of friction dampers,” REM-International Engineering Journal, vol. 70, no. 3, pp. 273–279, 2017. View at Publisher · View at Google Scholar
  16. L. F. Fadel Miguel, R. H. Lopez, and L. F. F. Miguel, “Discussion of paper: “Estimating optimum parameters of tuned mass dampers using harmony search” [Eng. Struct. 33 (9) (2011) 2716–2723],” Engineering Structures, vol. 54, pp. 262–264, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. L. F. Fadel Miguel, R. H. Lopez, L. F. F. Miguel, and A. J. Torii, “A novel approach to the optimum design of MTMDs under seismic excitations,” Structural Control and Health Monitoring, vol. 23, no. 11, pp. 1290–1313, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. L. F. F. Miguel, R. H. Lopez, A. J. Torii, L. F. F. Miguel, and A. T. Beck, “Robust design optimization of TMDs in vehicle-bridge coupled vibration problems,” Engineering Structures, vol. 126, pp. 703–711, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. Y. Arfiadi and M. N. S. Hadi, “Optimum placement and properties of tuned mass dampers using hybrid genetic algorithms,” International Journal of Optimization in Civil Engineering, vol. 1, pp. 167–187, 2011. View at Google Scholar
  20. M. Mohebbi, K. Shakeri, Y. Ghanbarpour, and H. Majzoub, “Designing optimal multiple tuned mass dampers using genetic algorithms (gas) for mitigating the seismic response of structures,” Journal of Vibration and Control, vol. 19, no. 4, pp. 605–625, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. M. G. Soto and H. Adeli, “Tuned mass dampers,” Archives of Computational Methods in Engineering, vol. 20, no. 4, pp. 419–431, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. L. S. Vellar, L. F. F. Miguel, and L. F. F. Miguel, “Controle de vibrações de estruturas através do uso de amortecedor de massa sintonizado (AMS),” in Proceedings of XXXVII Jornadas Sul Americanas de Engenharia Estrutural, pp. 1168–1182, Asunción, Paraguay, 2016.
  23. A. Mohtat and E. Dehghan-Niri, “Generalized framework for robust design of tuned mass damper systems,” Journal of Sound and Vibration, vol. 330, no. 5, pp. 902–922, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. K. Xu and T. Igusa, “Dynamic characteristics of multiple substructures with closely spaced frequencies,” Earthquake Engineering & Structural Dynamics, vol. 21, no. 12, pp. 1059–1070, 1992. View at Publisher · View at Google Scholar · View at Scopus
  25. Q. Wu, W. Zhao, W. Zhu, R. Zheng, and X. Zhao, “A tuned mass damper with nonlinear magnetic force for vibration suppression with wide frequency range of offshore platform under earthquake loads,” Shock and Vibration, vol. 2018, Article ID 1505061, 18 pages, 2018. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. Luo, H. Sun, X. Wang, L. Zuo, and N. Chen, “Wind induced vibration control and energy harvesting of electromagnetic resonant shunt tuned mass-damper-inerter for building structures,” Shock and Vibration, vol. 2017, Article ID 4180134, 13 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus
  27. Q. Wu, X. Zhao, S. He, W. Tang, and R. Zheng, “A bufferable tuned-mass damper of an offshore platform against stroke and response delay problems under earthquake loads,” Shock and Vibration, vol. 2016, Article ID 9702152, 12 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  28. J. S. Bae, J. S. Park, J. H. Hwang, J. H. Roh, B. D. Pyeon, and J. H. Kim, “Vibration suppression of a cantilever plate using magnetically multimode tuned mass dampers,” Shock and Vibration, vol. 2018, Article ID 3463528, 13 pages, 2018. View at Publisher · View at Google Scholar · View at Scopus
  29. Q. Wu, X. Zhao, R. Zheng, and K. Minagawa, “High response performance of a tuned-mass damper for vibration suppression of offshore platform under earthquake loads,” Shock and Vibration, vol. 2016, Article ID 7383679, 11 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  30. A. A. Farghaly and M. S. Ahmed, “Optimum design of TMD System for tall buildings,” ISRN Civil Engineering, vol. 2012, Article ID 716469, 13 pages, 2012. View at Publisher · View at Google Scholar
  31. L. Zuo and S. A. Nayfeh, “Optimization of the individual stiffness and damping parameters in multiple-tuned-mass-damper systems,” Journal of Vibration and Acoustics, vol. 127, no. 1, pp. 77–83, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Elias and V. Matsagar, “Wind response control of tall buildings with a tuned mass damper,” Journal of Building Engineering, vol. 15, pp. 51–60, 2018. View at Publisher · View at Google Scholar · View at Scopus
  33. M. Abé and Y. Fujino, “Dynamic characterization of multiple tuned mass dampers and some design formulas,” Earthquake Engineering & Structural Dynamics, vol. 23, no. 8, pp. 813–835, 1994. View at Publisher · View at Google Scholar · View at Scopus
  34. W. E. D. Sánchez, S. M. Avila, and J. L. V. Brito, “Optimal placement of damping devices in buildings,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, p. 337, 2018. View at Publisher · View at Google Scholar · View at Scopus
  35. C.-L. Lee, Y.-T. Chen, L.-L. Chung, and Y.-P. Wang, “Optimal design theories and applications of tuned mass dampers,” Engineering Structures, vol. 28, no. 1, pp. 43–53, 2006. View at Publisher · View at Google Scholar · View at Scopus
  36. A. Ghosh and B. Basu, “A closed-form optimal tuning criterion for TMD in damped structures,” Structural Control and Health Monitoring, vol. 14, no. 4, pp. 681–692, 2007. View at Publisher · View at Google Scholar · View at Scopus
  37. N. B. Desu, S. K. Deb, and A. Dutta, “Coupled tuned mass dampers for control of coupled vibrations in asymmetric buildings,” Structural Control and Health Monitoring, vol. 13, no. 5, pp. 897–916, 2006. View at Publisher · View at Google Scholar · View at Scopus
  38. J.-F. Wang, C.-C. Lin, and C.-H. Lian, “Two-stage optimum design of tuned mass dampers with consideration of stroke,” Structural Control and Health Monitoring, vol. 16, no. 1, pp. 55–72, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. P. Brzeski, P. Perlikowski, and T. Kapitaniak, “Numerical optimization of tuned mass absorbers attached to strongly nonlinear duffing oscillator,” Communications in Nonlinear Science and Numerical Simulation, vol. 19, no. 1, pp. 298–310, 2014. View at Publisher · View at Google Scholar · View at Scopus
  40. N. Hoang, Y. Fujino, and P. Warnitchai, “Optimal tuned mass damper for seismic applications and practical design formulas,” Engineering Structures, vol. 30, no. 3, pp. 707–715, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. B. Farshi and A. Assadi, “Development of a chaotic nonlinear tuned mass damper for optimal vibration response,” Communications in Nonlinear Science and Numerical Simulation, vol. 16, no. 11, pp. 4514–4523, 2011. View at Publisher · View at Google Scholar · View at Scopus
  42. G. C. Marano, R. Greco, and B. Chiaia, “A comparison between different optimization criteria for tuned mass dampers design,” Journal of Sound and Vibration, vol. 329, no. 23, pp. 4880–4890, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. C. Li and W. Qu, “Optimum properties of multiple tuned mass dampers for reduction of translational and torsional response of structures subject to ground acceleration,” Engineering Structures, vol. 28, no. 4, pp. 472–494, 2006. View at Publisher · View at Google Scholar · View at Scopus
  44. G. Chen and J. Wu, “Optimal placement of multiple tune mass dampers for seismic structures,” Journal of Structural Engineering, vol. 127, no. 9, pp. 1054–1062, 2001. View at Publisher · View at Google Scholar · View at Scopus
  45. P. Warnitchai and N. Hoang, “Optimal placement and tuning of multiple tuned mass dampers for suppressing multi-mode structural response,” Smart Structures and Systems, vol. 2, no. 1, pp. 1–24, 2006. View at Publisher · View at Google Scholar · View at Scopus
  46. O. Lavan and Y. Daniel, “Full resources utilization seismic design of irregular structures using multiple tuned mass dampers,” Structural and Multidisciplinary Optimization, vol. 48, no. 3, pp. 517–532, 2013. View at Publisher · View at Google Scholar · View at Scopus
  47. E. Dehghan-Niri, S. M. Zahrai, and A. Mohtat, “Effectiveness-robustness objectives in MTMD system design: an evolutionary optimal design methodology,” Structural Control and Health Monitoring, vol. 17, no. 2, pp. 218–236, 2010. View at Publisher · View at Google Scholar · View at Scopus
  48. J. L. Almazán, J. C. De la Llera, J. A. Inaudi, D. López-García, and L. E. Izquierdo, “A bidirectional and homogeneous tuned mass damper: a new device for passive control of vibrations,” Engineering Structures, vol. 29, no. 7, pp. 1548–1560, 2007. View at Publisher · View at Google Scholar · View at Scopus
  49. J. Mondal, H. Nimmala, S. Abdulla et al., “Tuned liquid damper,” in Proceedings of the 3rd International Conference on Mechanical Engineering and Mechatronics, no. 68, Prague, Czech Republic, August 2014.
  50. F. Sadek, B. Mohraz, A. W. Taylor, and R. M. Chung, “A method of estimating the parameters of tuned mass dampers for seismic applications,” Earthquake Engineering & Structural Dynamics, vol. 26, no. 6, pp. 617–635, 1997. View at Publisher · View at Google Scholar
  51. L. F. F. Miguel and L. F. Fadel Miguel, “Shape and size optimization of truss structures considering dynamic constraints through modern metaheuristic algorithms,” Expert Systems with Applications, vol. 39, no. 10, pp. 9458–9467, 2012. View at Publisher · View at Google Scholar · View at Scopus
  52. L. F. F. Miguel, R. H. Lopez, and L. F. F. Miguel, “Multimodal size, shape, and topology optimisation of truss structures using the Firefly algorithm,” Advances in Engineering Software, vol. 56, pp. 23–37, 2013. View at Publisher · View at Google Scholar · View at Scopus
  53. M. S. Gonçalves, R. H. Lopez, and L. F. F. Miguel, “Search group algorithm: a new metaheuristic method for the optimization of truss structures,” Computers & Structures, vol. 153, pp. 165–184, 2015. View at Publisher · View at Google Scholar · View at Scopus
  54. A. G. Groehs, Mecânica Vibratória, Editora Unisinos, São Leopoldo, Brazil, 2001.
  55. K. Kanai, “An empirical formula for the spectrum of strong earthquake motions,” Bulletin Earthquake Research Institute, vol. 39, pp. 85–95, 1961. View at Google Scholar
  56. H. Tajimi, “A statistical method of determining the maximum response of a building structure during an earth-quake,” in Proceedings of 2nd World Conference in Earthquake Engineering, pp. 781–797, Tokyo, Japan, July 1960.
  57. D. E. Huntington and C. S. Lyrintzis, “Improvements to and limitations of Latin hypercube sampling,” Probabilistic Engineering Mechanics, vol. 13, no. 4, pp. 245–253, 1998. View at Publisher · View at Google Scholar
  58. R. L. Iman, “Latin hypercube sampling,” in Encyclopedia of Quantitative Risk Analysis and Assessment, John Wiley & Sons, Hoboken, NJ, USA, 2008. View at Google Scholar
  59. M. D. McKay, R. J. Beckman, and W. J. Conover, “Comparison of three methods for selecting values of input variables in the analysis of output from a computer code,” Technometrics, vol. 21, no. 2, pp. 239–245, 1979. View at Publisher · View at Google Scholar · View at Scopus
  60. G. D. Wyss and K. H. Jorgensen, “A user’s guide to LHS: Sandia’s Latin hypercube sampling software,” Report SAND98-0210, Sandia National Laboratories, Albuquerque, NM, USA, 1998.