Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2019, Article ID 9346232, 26 pages
https://doi.org/10.1155/2019/9346232
Research Article

Geotechnical Seismic Isolation System Based on Sliding Mechanism Using Stone Pebble Layer: Shake-Table Experiments

University of Split, Faculty of Civil Engineering, Architecture and Geodesy, Matice Hrvatske 15, 21000 Split, Croatia

Correspondence should be addressed to Ivan Banović; rh.tsdarg@civonab.navi

Received 21 December 2018; Revised 7 March 2019; Accepted 12 March 2019; Published 27 March 2019

Academic Editor: Yuri S. Karinski

Copyright © 2019 Ivan Banović et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Makris, “Seismic isolation: early history,” Earthquake Engineering & Structural Dynamics, vol. 48, no. 2, pp. 269–283, 2018. View at Publisher · View at Google Scholar · View at Scopus
  2. S. J. Patil, G. R. Reddy, R. Shivshankar, R. Babu, B. R. Jayalekshmi, and B. Kumar, “Seismic base isolation for structures using river sand,” Earthquakes and Structures, vol. 10, no. 4, pp. 829–847, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Radnić, N. Grgić, D. Matešan, and G. Baloević, “Shake table testing of reinforced concrete columns with different layout size of foundation,” Materialwissenschaft und Werkstofftechnik, vol. 46, no. 4-5, pp. 348–367, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. I. Banović, J. Radnić, N. Grgić, and D. Matešan, “The use of limestone sand for the seismic base isolation of structures,” Advances in Civil Engineering, vol. 2018, Article ID 9734283, 12 pages, 2018. View at Publisher · View at Google Scholar · View at Scopus
  5. F. M. Tehrani and A. Hasani, “Behaviour of Iranian low rise buildings on sliding base to earthquake excitation,” in Proceedings of the 11th World Conference on Earthquake Engineering, Acapulco, Mexico, June 1996, Paper 1433.
  6. X. Zhao, Q. Zhang, Q. Zhang, and J. He, “Numerical study on seismic isolation effect of gravel cushion,” in Proceedings of the 7th International Conference on Discrete Element Methods, vol. 188, pp. 1055–1063, Dalian, China, August 2016.
  7. A. Pecker, J. H. Prevost, and L. Dormieux, “Analysis of pore pressure generation and dissipation in cohesionless materials during seismic loading,” Journal of Earthquake Engineering, vol. 5, no. 4, pp. 441–464, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Pecker, “Aseismic foundation design process, lessons learned from two major projects: the Vasco de Gama and the Rion Antirion bridges,” in Proceedings of the ACI International Conference on Seismic Bridge Design and Retrofit, La Jolla, CA, USA, 2003.
  9. J. S. Steenfelt, B. Foged, and A. H. Augustesen, “Izmit Bay Bridge-geotechnical challenges and innovative solutions,” International Journal of Bridge Engineering (IJBE), vol. 3, no. 3, pp. 53–68, 2015. View at Google Scholar
  10. I. Anastasopoulos, M. Loli, T. Georgarakos, and V. Drosos, “Shaking table testing of rocking-isolated bridge pier on sand,” Journal of Earthquake Engineering, vol. 17, no. 1, pp. 1–32, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. G. H. Zhang, “Study on the suitability of seismic isolation technologies for rural buildings,” Applied Mechanics and Materials, vol. 353-356, pp. 2221–2227, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. I. Doudoumis, P. Papadopoulos, and T. Papaliangas, “Low-cost base isolation system on artificial soil layers with low shearing resistance,” in Proceedings of the 12th European Conference on Earthquake Engineering, London, UK, September 2002.
  13. M. K. Yegian and U. Kadakal, “Foundation isolation for seismic protection using a smooth synthetic liner,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 130, no. 11, pp. 1121–1130, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. M. K. Yegian and M. Catan, “Soil isolation for seismic protection using a smooth synthetic liner,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 130, no. 11, pp. 1131–1139, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. H.-H. Tsang, S. H. Lo, X. Xu, and M. Neaz Sheikh, “Seismic isolation for low-to-medium-rise buildings using granulated rubber-soil mixtures: numerical study,” Earthquake Engineering & Structural Dynamics, vol. 41, no. 14, pp. 2009–2024, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Pitilakis, S. Karapetrou, and K. Tsagdi, “Numerical investigation of the seismic response of RC buildings on soil replaced with rubber-sand mixtures,” Soil Dynamics and Earthquake Engineering, vol. 79, pp. 237–252, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. W. Xiong and Y. Li, “Seismic isolation using granulated tire-soil mixtures for less-developed regions: experimental validation,” Earthquake Engineering & Structural Dynamics, vol. 42, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Panjamani, M. Devarahalli Ramegowda, and R. Divyesh, “Low cost damping scheme for low to medium rise buildings using rubber soil mixtures,” Japanese Geotechnical Society Special Publication, vol. 3, no. 2, pp. 24–28, 2015. View at Publisher · View at Google Scholar
  19. S. Bandyopadhyay, A. Sengupta, and G. R. Reddy, “Performance of sand and shredded rubber tire mixture as a natural base isolator for earthquake protection,” Earthquake Engineering and Engineering Vibration, vol. 14, no. 4, pp. 683–693, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. R. P. Nanda, P. Agarwal, and M. Shrikhande, “Suitable friction sliding materials for base isolation of masonry buildings,” Shock and Vibration, vol. 19, no. 6, pp. 1327–1339, 2012. View at Publisher · View at Google Scholar
  21. R. P. Nanda, P. Agarwal, and M. Shrikhande, “Base isolation by geosynthetic for brick masonry buildings,” Journal of Vibration and Control, vol. 18, no. 6, pp. 903–910, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. R. P. Nanda, M. Shrikhande, and P. Agarwal, “Effect of ground motion characteristics on the pure friction isolation system,” Earthquakes and Structures, vol. 3, no. 2, pp. 169–180, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. R. P. Nanda, M. Shrikhande, and P. Agarwal, “Low-cost base-isolation system for seismic protection of rural buildings,” Practice Periodical on Structural Design and Construction, vol. 21, no. 1, Article ID 04015001, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. H. Xiao, J. W. Butterworth, and T. Larkin, “Low-technology techniques for seismic isolation,” in Proceedings of the NZSEE Conference, Rototua, New Zealand, 2004.
  25. M. Qamaruddin and S. Ahmad, “Seismic response of pure-friction base isolated masonry building with restricted base-sliding,” Journal of Engineering Research [TJER], vol. 4, no. 1, pp. 82–94, 2007. View at Publisher · View at Google Scholar
  26. S. Ahmad, F. Ghani, and M. Raghib Adil, “Seismic friction base isolation performance using demolished waste in masonry housing,” Construction and Building Materials, vol. 23, no. 1, pp. 146–152, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. I. Banović, J. Radnić, and N. Grgić, “Shake table study on the efficiency of seismic base isolation using natural stone pebbles,” Advances in Materials Science and Engineering, vol. 2018, Article ID 1012527, 20 pages, 2018. View at Publisher · View at Google Scholar
  28. H. H. Tsang, “Geotechnical seismic isolation,” in Earthquake Engineering: New Research, pp. 55–87, Nova Science Publishers Inc., New York, NY, USA, 2009. View at Google Scholar
  29. S. Brunet, J. C. de la Llera, and E. Kausel, “Non-linear modeling of seismic isolation systems made of recycled tire-rubber,” Soil Dynamics and Earthquake Engineering, vol. 85, pp. 134–145, 2016. View at Publisher · View at Google Scholar · View at Scopus
  30. D. Forcellini, “Assessment on geotechnical seismic isolation (GSI) on bridge configurations,” Innovative Infrastructure Solutions, vol. 2, no. 1, p. 9, 2017. View at Publisher · View at Google Scholar
  31. H.-H. Tsang, “Seismic isolation by rubber-soil mixtures for developing countries,” Earthquake Engineering & Structural Dynamics, vol. 37, no. 2, pp. 283–303, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. E. Mavronicola, P. Komodromos, and D. C. Charmpis, “Numerical investigation of potential usage of rubber–soil mixtures as a distributed seismic isolation approach,” in Proceedings of the 10th International Conference on Computational Structures Technology, Valencia, Spain, September 2010.
  33. N. Ambraseys, P. Smit, R. Sigbjörnsson, P. Suhadolc, and M. Margaris, EVR1-CT-1999-40008, European Commission, Directorate-General XII, Environmental and Climate Programme, Brussels, Belgium, 2001, http://www.isesd.hi.is/ESD_Local/frameset.htm.
  34. EN 1998-1:2004, Eurocode 8: Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium, 2004.