Proceedings of the Symposium Texture Control and Anisotropy of Properties in Magnetic MaterialsView this Special Issue
H. J. Bunge, H. J. Kopineck, F. Wagner, "On-line Texture Analysis for Magnetic Property Control", Texture, Stress, and Microstructure, vol. 11, Article ID 950184, 7 pages, 1989. https://doi.org/10.1155/TSM.11.261
On-line Texture Analysis for Magnetic Property Control
Magnetic properties of hard and soft magnetic materials are strongly anisotropic, i.e. they depend on the crystal direction in which they are being considered. Technological materials are usually polycrystalline. Hence, their properties are orientation mean values of the properties of the crystallites with the texture of the material as the weight function. Inspection and control of magnetic properties of materials thus requires inspection and control of the materials texture which can be carried out off-line by taking samples from the finished material and investigating them in the laboratory. If, however, the texture of the material is to be controlled during the production process then a fast non-destructive on-line texture analyser is required the output signal of which can be used to control the production process.
Copyright © 1989 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.