Table of Contents
Textures and Microstructures
Volume 20, Issue 1-4, Pages 29-40

EBSP, Progress in Technique and Applications

1Royal Norwegian Air Force Academy, Trondheim mil N-7004, Norway
2Hydro Aluminium A/S, SunndalsØra N-6601, Norway
3SINTEF, Division of Metallurgy, Trondheim N-7034, Norway
4The Norwegian Institute of Technology, Department of Metallurgy, Trondheim N-7034, Norway

Copyright © 1993 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


To measure grain orientation in SEM with high accuracy a new EBSP calibration software is developed. Grain orientation determination is simply based on marking three zone axes in the live EBSP. The EBSP-technique has been applied to study misorientation between subgrains in high purity and commercially pure aluminium. The lattice curvatures, which develop during deformation, increase with the amount of deformation. During annealing the subgrains grow, resulting in an increased average neighbouring misorientation due to misorientation accumulation.