Table of Contents
Texture, Stress, and Microstructure
Volume 2008, Article ID 173083, 9 pages
http://dx.doi.org/10.1155/2008/173083
Research Article

Texture Control During the Manufacturing of Nonoriented Electrical Steels

1Department of Materials Science and Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
2Electrical Steel Product Development Management, ArcelorMittal, Guldensporenpark 78, 9820 Merelbeke, Belgium

Received 20 July 2007; Accepted 19 February 2008

Academic Editor: Claude Esling

Copyright © 2008 Leo Kestens and Sigrid Jacobs. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H.-J. Bunge, Texture Analysis in Materials Science: Mathematical Models, Butterworths, London, UK, 1982.
  2. C. W. Chen, Magnetism and Metallurgy of Soft Magnetic Materials, North-Holland, Amsterdam, The Netherlands, 1977.
  3. J. Harase, R. Shimizu, and N. Takahashi, “Mechanism of Goss secondary recrystallization in grain-oriented silicon steel,” Textures and Microstructures, vol. 14, part 3-4, pp. 679–684, 1991. View at Google Scholar
  4. A. D. Rollett, M. L. Storch, E. J. Hilinski, and S. R. Goodman, “Approach to saturation in textured soft magnetic materials,” Metallurgical and Materials Transactions A, vol. 32, no. 10, pp. 2595–2603, 2001. View at Google Scholar
  5. L. Kestens and J. J. Jonas, “Transformation and recrystallization textures associated with steel processing,” in Metalworking: Bulk Forming, S. L. Semiatin, Ed., vol. 14A of ASM Handbook, pp. 685–700, ASM International, Materials Park, Ohio, USA, 2005. View at Google Scholar
  6. P. Van Houtte, S. Li, M. Seefeldt, and L. Delannay, “Deformation texture prediction: from the Taylor model to the advanced Lamel model,” International Journal of Plasticity, vol. 21, no. 3, pp. 589–624, 2005. View at Publisher · View at Google Scholar
  7. K. Verbeken, L. Kestens, and J. J. Jonas, “Microtextural study of orientation change during nucleation and growth in a cold rolled ULC steel,” Scripta Materialia, vol. 48, no. 10, pp. 1457–1462, 2003. View at Publisher · View at Google Scholar
  8. L. Kestens, J. J. Jonas, P. Van Houtte, and E. Aernoudt, “Orientation selective recrystallization of nonoriented electrical steels,” Metallurgical and Materials Transactions A, vol. 27, no. 8, pp. 2347–2358, 1996. View at Publisher · View at Google Scholar
  9. J. P. Anderson and B. A. Lauer, “Electrical steel with improved magnetic properties in the rolling direction,” US patent no. 6,569,265, May 2003.
  10. T. Shimazu, M. Shiozaki, and K. Kawasaki, “Effect of temper rolling on texture formation of semi-processed non-oriented steel,” Journal of Magnetism and Magnetic Materials, vol. 133, no. 1–3, pp. 147–149, 1994. View at Publisher · View at Google Scholar
  11. S. W. Cheong, E. J. Hilinski, and A. D. Rollett, “Effect of temper rolling on texture formation in a low loss cold-rolled magnetic lamination steel,” Metallurgical and Materials Transactions A, vol. 34, no. 6, pp. 1311–1319, 2003. View at Publisher · View at Google Scholar
  12. E. J. Hilinski, “Recent developments in semiprocessed cold rolled magnetic lamination steel,” Journal of Magnetism and Magnetic Materials, vol. 304, no. 2, pp. 172–177, 2006. View at Publisher · View at Google Scholar
  13. V. Randle, “Microtexture investigation of the relationship between strain and anomalous grain growth,” Philosophical Magazine A, vol. 67, no. 6, pp. 1301–1313, 1993. View at Publisher · View at Google Scholar
  14. N. Yoshinaga, L. Kestens, and B. C. De Cooman, “αγα transformation texture formation at cold-rolled ultra low carbon steel surfaces,” Materials Science Forum, vol. 495-497, part 1-2, pp. 1267–1272, 2005. View at Google Scholar
  15. T. Tomida, “A new process to develop (100) texture in silicon steel sheets,” Journal of Materials Engineering and Performance, vol. 5, no. 3, pp. 316–322, 1996. View at Publisher · View at Google Scholar