Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2012 (2012), Article ID 239271, 8 pages
http://dx.doi.org/10.1100/2012/239271
Research Article

Optimization of Ozonation Process for the Reduction of Excess Sludge Production from Activated Sludge Process of Sago Industry Wastewater Using Central Composite Design

Environmental Engineering and Technology Laboratory, Department of Environmental Sciences, Bharathiar University, Coimbatore 641046, India

Received 14 October 2011; Accepted 27 December 2011

Academic Editor: Peter J. Lasier

Copyright © 2012 B. Subha and M. Muthukumar. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [8 citations]

The following is the list of published articles that have cited the current article.

  • Pi-Ju Tsai, Chi-Te Huang, Chen-Chou Lee, Chi-Lin Li, Yaw-Bin Huang, Yi-Hung Tsai, and Pao-Chu Wu, “Isotretinoin Oil-Based Capsule Formulation Optimization,” The Scientific World Journal, vol. 2013, pp. 1–6, 2013. View at Publisher · View at Google Scholar
  • Hamid Reza Fard Masoumi, Mahiran Basri, Anuar Kassim, Dzulkefly Kuang Abdullah, Yadollah Abdollahi, Siti Salwa Abd Gani, and Malahat Rezaee, “Statistical Optimization of Process Parameters for Lipase-Catalyzed Synthesis of Triethanolamine-Based Esterquats Using Response Surface Methodology in 2-Liter Bioreactor,” The Scientific World Journal, vol. 2013, pp. 1–9, 2013. View at Publisher · View at Google Scholar
  • Bakthavachallam Subha, Young Chae Song, and Jung Hui Woo, “Optimization of biostimulant for bioremediation of contaminated coastal sediment by response surface methodology (RSM) and evaluation of microbial diversity by pyrosequencing,” Marine Pollution Bulletin, 2015. View at Publisher · View at Google Scholar
  • Prachya Peasura, “Application of Response Surface Methodology for Modeling of Postweld Heat Treatment Process in a Pressure Vessel Steel ASTM A516 Grade 70,” The Scientific World Journal, vol. 2015, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • A. Cabrera-Díaz, I. Pereda-Reyes, J. Dueñas-Moreno, E. Véliz-Lorenzo, M. A. Díaz-Marrero, C. L. Menéndez-Gutiérrez, D. Oliva-Merencio, and M. Zaiat, “Combined Treatment Of Vinasse By An Upflow Anaerobic Filter-Reactor And Ozonation Process,” Brazilian Journal of Chemical Engineering, vol. 33, no. 4, pp. 753–762, 2016. View at Publisher · View at Google Scholar
  • V. Sangeetha, and V. Sivakumar, “Biogas Production From Synthetic Sago Wastewater By Anaerobic Digestion: Optimization And Treatment,” Chemical Industry & Chemical Engineering Quarterly, vol. 22, no. 1, pp. 33–39, 2016. View at Publisher · View at Google Scholar
  • Bakthavachallam Subha, Jung Hui Woo, and Young Chae Song, “Bioremediation of contaminated coastal sediment: Optimization of slow release biostimulant ball using response surface methodology (RSM) and stabilization of metals from contaminated sediment,” Marine Pollution Bulletin, vol. 114, no. 1, pp. 285–295, 2017. View at Publisher · View at Google Scholar
  • Galilee U. Semblante, Faisal I. Hai, Dionysios D. Dionysiou, Kensuke Fukushi, William E. Price, and Long D. Nghiem, “Holistic sludge management through ozonation: A critical review,” Journal of Environmental Management, vol. 185, pp. 79–95, 2017. View at Publisher · View at Google Scholar