Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2012, Article ID 838575, 7 pages
http://dx.doi.org/10.1100/2012/838575
Research Article

Rapid Prototyping in Orthopaedic Surgery: A User's Guide

Orthopaedic Department, Royal Hospital for Sick Children, Yorkhill, Glasgow G3 8SJ, UK

Received 22 September 2011; Accepted 6 December 2011

Academic Editor: Akihiro Takano

Copyright © 2012 Mark Frame and James S. Huntley. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [34 citations]

The following is the list of published articles that have cited the current article.

  • Mohd Asnawi Omar, Bt-Ht Baharudin, and S. Sulaiman, “Stent manufacturing using cobalt chromium molybdenum (CoCrMo) by selective laser melting technology,” vol. 1901, pp. 040001, . View at Publisher · View at Google Scholar
  • Mohd Asnawi Omar, Bt-Ht Baharudin, and S. Sulaiman, “Stent manufacturing using cobalt chromium molybdenum (CoCrMo) by selective laser melting technology,” vol. 1901, pp. 100017, . View at Publisher · View at Google Scholar
  • Pan Yu-qin, Ruan Zheng, Liu Fa-bing, Wang Jing, Chen Yong, Liang Xue-yan, and Wu Bing, “The Use Of Ct Scan And Stereo Lithography Apparatus Technologies In A Canine Individualized Rib Prosthesis,” International Journal of Surgery, 2013. View at Publisher · View at Google Scholar
  • Wang Kyun Oh, Ki Seon Lim, and Tea Soo Lee, “Additive Manufacturing of Patient-specific Femur Via 3D Printer Using Computed Tomography Images,” Journal of the Korean Society of Radiology, vol. 7, no. 5, pp. 359–364, 2013. View at Publisher · View at Google Scholar
  • Erin J. Smith, Joseph A. Anstey, Gabriel Venne, and Randy E. Ellis, “Using additive manufacturing in accuracy evaluation of reconstructions from computed tomography,” Proceedings Of The Institution Of Mechanical Engineers Part H-Journal Of En, vol. 227, no. H5, pp. 551–559, 2013. View at Publisher · View at Google Scholar
  • Daniel Preece, Sarah B. Williams, Richard Lam, and Renate Weller, ““Let's Get Physical”: Advantages of a physical model over 3D computer models and textbooks in learning imaging anatomy,” Anatomical Sciences Education, 2013. View at Publisher · View at Google Scholar
  • Emmanuel Promayon, Nicolas Saubat, Sonia Yuki Selmi, Sandrine Voros, Philippe Cinquin, Troccaz, Celine Fouard, Mathieu Bailet, Aurelien Deram, Gaelle Fiard, Nikolai Hungr, Vincent Luboz, Yohan Payan, and Johan Sarrazin, “Using CamiTK for rapid prototyping of interactive Computer Assisted Medical Intervention applications,” Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, pp. 4933–4936, 2013. View at Publisher · View at Google Scholar
  • Simeon J. West, Jean-Martial Mari, Azalea Khan, Jordan H. Y. Wan, Wenjie Zhu, Ioannis G. Koutsakos, Matthew Rowe, Damon Kamming, and Adrien E. Desjardins, “Development of an Ultrasound Phantom for Spinal Injections With 3-Dimensional Printing,” Regional Anesthesia and Pain Medicine, vol. 39, no. 5, pp. 429–433, 2014. View at Publisher · View at Google Scholar
  • William G. Blakeney, Robert Day, Laurence Cusick, and Richard L. Carey Smith, “Custom osteotomy guides for resection of a pelvic chondrosarcoma,” Acta Orthopaedica, vol. 85, no. 4, pp. 438–441, 2014. View at Publisher · View at Google Scholar
  • Kook Jin Chung, Bingzhe Huang, Chang Hyun Choi, Yong Wook Park, and Hyong Nyun Kim, “Utility of 3D Printing for Complex Distal Tibial Fractures and Malleolar Avulsion Fractures: Technical Tip,” Foot & Ankle International, vol. 36, no. 12, pp. 1504–1510, 2015. View at Publisher · View at Google Scholar
  • Tianrun Cai, Frank J. Rybicki, Andreas A. Giannopoulos, Kurt Schultz, Kanako K. Kumamaru, Peter Liacouras, Shadpour Demehri, Kirstin M. Shu Small, and Dimitris Mitsouras, “The residual STL volume as a metric to evaluate accuracy and reproducibility of anatomic models for 3D printing: application in the validation of 3D-printable models of maxillofacial bone from reduced radiation dose CT images,” 3D Printing in Medicine, vol. 1, no. 1, 2015. View at Publisher · View at Google Scholar
  • Jane S. Matsumoto, Jonathan M. Morris, Thomas A. Foley, Eric E. Williamson, Shuai Leng, Kiaran P. McGee, Joel L. Kuhlmann, Linda E. Nesberg, and Terri J. Vrtiska, “Three-dimensional Physical Modeling: Applications and Experience at Mayo Clinic,” RadioGraphics, vol. 35, no. 7, pp. 1989–2006, 2015. View at Publisher · View at Google Scholar
  • Sean S. Moore, Kevin J. O’Sullivan, and Francesco Verdecchia, “Shrinking the Supply Chain for Implantable Coronary Stent Devices,” Annals of Biomedical Engineering, 2015. View at Publisher · View at Google Scholar
  • Konrad Mader, Marianne Koolen, Mark Flipsen, Arnard van der Zwan, Dietmar Pennig, and John Ham, “Complex forearm deformities: operative strategy in posttraumatic pathology,” Obere Extremität, 2015. View at Publisher · View at Google Scholar
  • Josip Nižetić, Karlo Obrovac, Toma Udiljak, Jadranka Vuković Obrovac, Josip Nizetic, Karlo Obrovac, Toma Udiljak, and Jadranka Vukovic Obrovac, “Contribution to the current trends in digital foot surgery planning,” Energy Procedia, vol. 100, no. C, pp. 220–225, 2015. View at Publisher · View at Google Scholar
  • Hyeong-Gyun Kim, Ki-Moo Lim, Joon-Koo Choi, Gha-Jung Kim, and Dong-Hee Hon, “A study on outputting the shape of carpus using medical image and 3D printer,” Indian Journal of Science and Technology, vol. 9, no. 20, 2016. View at Publisher · View at Google Scholar
  • Ferdinando Auricchio, and Stefania Marconi, “3D printing: clinical applications in orthopaedics and traumatology.,” EFORT open reviews, vol. 1, no. 5, pp. 121–127, 2016. View at Publisher · View at Google Scholar
  • You, Liu, Xiong, Wang, Ding, Chen, Huang, and Wang, “Application of 3D printing technology on the treatment of complex proximal humeral fractures (Neer3-part and 4-part) in old people,” Orthopaedics and Traumatology: Surgery and Research, vol. 102, no. 7, pp. 897–903, 2016. View at Publisher · View at Google Scholar
  • Francisco Chana-Rodríguez, José Rojo-Manaute, José María Martínez-Gómiz, Javier Vaquero-Martín, Rubén Pérez Mañanes, and Pablo Gil, “3D surgical printing and pre contoured plates for acetabular fractures,” Injury, vol. 47, no. 11, pp. 2507–2511, 2016. View at Publisher · View at Google Scholar
  • Rob F.M. van Doremalen, Jan J. Kootstra, Edsko E.G. Hekman, and Sven H. van Helden, “Use of rapid prototyping in a midschaft clavicular pseudarthrosis repair,” Journal of Shoulder and Elbow Surgery, vol. 25, no. 1, pp. e21–e24, 2016. View at Publisher · View at Google Scholar
  • Nicolas Martelli, Carole Serrano, Hélène van den Brink, Judith Pineau, Patrice Prognon, Isabelle Borget, and Salma El Batti, “Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review,” Surgery, 2016. View at Publisher · View at Google Scholar
  • Don Hoang, David Perrault, Milan Stevanovic, and Alidad Ghiassi, “Today surgical applications of three-dimensional printing: A review of the current literature & how to get started,” Annals of Translational Medicine, vol. 4, no. 23, 2016. View at Publisher · View at Google Scholar
  • Fernandes, Alves, and Fonseca, “Diaphyseal femoral fracture: 3D biomodel and intramedullary nail created by additive manufacturing,” International Journal of Materials Engineering Innovation, vol. 7, no. 2, pp. 130–142, 2016. View at Publisher · View at Google Scholar
  • Matthew B. Parkinson, and Charlotte M. De Vries, “Modeling the variability of glenoid geometry in intact shoulders,” Proceedings of the ASME Design Engineering Technical Conference, vol. 3, 2016. View at Publisher · View at Google Scholar
  • Bo Yuan, Sheng-yuan Zhou, and Xiong-sheng Chen, “Rapid prototyping technology and its application in bone tissue engineering,” Journal of Zhejiang University-SCIENCE B, vol. 18, no. 4, pp. 303–315, 2017. View at Publisher · View at Google Scholar
  • Taryn Hodgdon, Raman Danrad, Midhir J. Patel, Stacy E. Smith, Michael L. Richardson, David H. Ballard, Sayed Ali, Anthony Paul Trace, Carolynn M. DeBenedectis, Matthew E. Zygmont, Leon Lenchik, and Summer J. Decker, “Logistics of Three-dimensional Printing,” Academic Radiology, 2017. View at Publisher · View at Google Scholar
  • Li Zeng, Zhijian Pei, and Xingjian Wei, “3D printing of medical models: A literature review,” ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 14, 2017. View at Publisher · View at Google Scholar
  • Subha N. Rath, and Sharanya Sankar, “3D printers for surgical practice,” 3D Printing in Medicine, pp. 139–154, 2017. View at Publisher · View at Google Scholar
  • Anurup Ganguli, Gelson J. Pagan-Diaz, Lauren Grant, Caroline Cvetkovic, Mathew Bramlet, John Vozenilek, Thenkurussi Kesavadas, and Rashid Bashir, “3D printing for preoperative planning and surgical training: a review,” Biomedical Microdevices, vol. 20, no. 3, 2018. View at Publisher · View at Google Scholar
  • F. Chana Rodríguez, R. Pérez Mañanes, F.J. Narbona Cárceles, and P. Gil Martínez, “3D printing utility for surgical treatment of acetabular fractures,” Revista Española de Cirugía Ortopédica y Traumatología (English Edition), vol. 62, no. 4, pp. 231–239, 2018. View at Publisher · View at Google Scholar
  • David Dreizin, Arthur J Nam, Jeffrey Hirsch, and Mark P Bernstein, “New and emerging patient-centered CT imaging and image-guided treatment paradigms for maxillofacial trauma,” Emergency Radiology, 2018. View at Publisher · View at Google Scholar
  • Alaa Aldaadaa, Nazanin Owji, and Jonathan Knowles, “Three-dimensional Printing in Maxillofacial Surgery: Hype versus Reality,” Journal of Tissue Engineering, vol. 9, pp. 204173141877090, 2018. View at Publisher · View at Google Scholar
  • Hyun Jin Park, Chenyu Wang, Kyung Ho Choi, and Hyong Nyun Kim, “Use of a life-size three-dimensional-printed spine model for pedicle screw instrumentation training,” Journal of Orthopaedic Surgery and Research, vol. 13, no. 1, 2018. View at Publisher · View at Google Scholar
  • Wang-Kyun Oh, and Hyeong-Gyun Kim, “Comparison of the Quality of Clavicle Fracture Three-dimensional Model Printing by Open Source and Commercial use Digital Imaging and Communications in Medicine Stereolithography File Conversion Program,” Journal of Radiological Science and Technology, vol. 41, no. 1, pp. 61–66, 2018. View at Publisher · View at Google Scholar