Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2013 (2013), Article ID 267593, 13 pages
http://dx.doi.org/10.1155/2013/267593
Research Article

The Use of the Direct Optimized Probabilistic Calculation Method in Design of Bolt Reinforcement for Underground and Mining Workings

1Department of Structural Mechanics, Faculty of Civil Engineering, VŠB-Technical University of Ostrava, 17 Listopadu 15, 708 33 Ostrava, Czech Republic
2Department of Geological Engineering, Faculty of Engineering, Cumhuriyet University, 58140 Sivas, Turkey
3Faculty of Mining and Geology, Institute of Geological Engineering, VŠB-Technical University of Ostrava, 17 Listopadu 15, 708 33 Ostrava, Czech Republic
4Department of Environmental Engineering, Faculty of Mining and Geology, VŠB-Technical University of Ostrava, 17 listopadu 15, 708 33 Ostrava, Czech Republic

Received 9 April 2013; Accepted 10 June 2013

Academic Editors: K. Nemeth and U. Tinivella

Copyright © 2013 Martin Krejsa et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • Martin Krejsa, Petr Janas, Vlastimil Krejsa, Zdenek Kala, and Stanislav Seitl, “DOProC-based reliability assessment of steel structures exposed to fatigue,” Perspectives in Science, 2015. View at Publisher · View at Google Scholar
  • Eva Kormaníková, and Kamila Kotrasová, “Composite laminate under influence of temperature and moisture,” MATEC Web of Conferences, vol. 76, pp. 04002, 2016. View at Publisher · View at Google Scholar
  • M. Krejsa, P. Janas, and V. Krejsa, “Structural Reliability Analysis Using DOProC Method,” Procedia Engineering, vol. 142, pp. 34–41, 2016. View at Publisher · View at Google Scholar
  • Martin Krejsa, Jiri Brozovsky, David Mikolasek, Premysl Parenica, Jakub Flodr, Alois Materna, Radim Halama, and Jaroslav Kozak, “Numerical modeling of steel fillet welded joint,” Advances in Engineering Software, 2017. View at Publisher · View at Google Scholar
  • Jiri Sejnoha, Petr Janas, Martin Krejsa, and Vlastimil Krejsa, “DOProC-based reliability analysis of structures,” Structural Engineering and Mechanics, vol. 64, no. 4, pp. 413–426, 2017. View at Publisher · View at Google Scholar
  • Eva Kormaníková, and Kamila Kotrasová, “Laminate circular cylindrical shell,” MATEC Web of Conferences, vol. 125, pp. 04010, 2017. View at Publisher · View at Google Scholar
  • Lehner, and Konecny, “Effect of cracking and randomness of inputs on corrosion initiation of reinforced concrete bridge decks exposed to chlorides,” Frattura ed Integrita Strutturale, vol. 11, no. 39, pp. 29–37, 2017. View at Publisher · View at Google Scholar