Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2013, Article ID 354093, 7 pages
Research Article

Optical Properties of Polypropylene upon Recycling

Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano, Italy

Received 26 August 2013; Accepted 14 September 2013

Academic Editors: G. Gorrasi, I. Gutierrez, and I. C. Um

Copyright © 2013 Felice De Santis and Roberto Pantani. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [5 citations]

The following is the list of published articles that have cited the current article.

  • Nino Sessa, Felice De Santis, Roberto Pantani, Nino Sessa, Felice De Santis, and Roberto Pantani, “Injection molding of iPP samples in controlled conditions and resulting morphology,” vol. 1693, pp. 020064, . View at Publisher · View at Google Scholar
  • Marianna Triantou, Nadia Todorova, Tatiana Giannakopoulou, Tiverios Vaimakis, and Christos Trapalis, “Mechanical performance of re-extruded and aged graphene/polypropylene nanocomposites,” Polymer International, 2017. View at Publisher · View at Google Scholar
  • Jayita Bandyopadhyay, and Suprakas Sinha Ray, “Structural Characterization of Polymer Nanocomposites,” Processing of Polymer-based Nanocomposites, vol. 277, pp. 87–126, 2018. View at Publisher · View at Google Scholar
  • Ksenia Groh, Jane Muncke, and Birgit Geueke, “Food packaging in the circular economy: Overview of chemical safety aspects for commonly used materials,” Journal of Cleaner Production, vol. 193, pp. 491–505, 2018. View at Publisher · View at Google Scholar
  • Ryo Kaneda, Toshihiro Takahashi, Masayasu Takiguchi, Motoharu Hijikata, and Hiroshi Ito, “Thin-wall injection molding of high-density polyethylene for infrared radiation system lenses,” Journal of Polymer Engineering, vol. 38, no. 3, pp. 307–313, 2018. View at Publisher · View at Google Scholar