Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2013 (2013), Article ID 396936, 11 pages
http://dx.doi.org/10.1155/2013/396936
Research Article

Wind Tunnel Tests for Wind Pressure Distribution on Gable Roof Buildings

1Department of Building Engineering, Tongji University, Shanghai 200092, China
2State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China

Received 22 May 2013; Accepted 28 July 2013

Academic Editors: D. Choudhury and J. Mander

Copyright © 2013 Xiao-kun Jing and Yuan-qi Li. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. D. Holmes, “Wind pressures on tropical housing,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 53, no. 1-2, pp. 105–123, 1994. View at Google Scholar · View at Scopus
  2. M. Kanda and E. Maruta, “Characteristics of fluctuating wind pressure on long low-rise buildings with gable roofs,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 50, pp. 173–182, 1993. View at Google Scholar · View at Scopus
  3. P. C. Case and N. Isyumov, “Wind loads on low buildings with 4:12 gable roofs in open country and suburban exposures,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 77-78, pp. 107–118, 1998. View at Publisher · View at Google Scholar · View at Scopus
  4. Ministry of Construction of the People's Republic of China, “Load code for the design of building structures,” Tech. Rep. GB50009-2001, China Architecture and Building Press, Beijing, China, 2006. View at Google Scholar
  5. Ministry of Construction of the People's Republic of China, “Load code for the design of building structures,” Tech. Rep. GB50009-2012, China Architecture and Building Press, Beijing, China, 2012. View at Google Scholar
  6. http://61.121.247.28/system/eng/contents/code/tpu.
  7. J. D. Holmes, Wind Loading of Structure, Spon Press, London, UK, 2001.
  8. D. Meecham, D. Surry, and A. G. Davenport, “The magnitude and distribution of wind-induced pressures on hip and gable roofs,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 38, no. 2-3, pp. 257–272, 1991. View at Google Scholar · View at Scopus
  9. H. Deng, F. Li, and X. Hu, “Study on wind resistant design of cladding based on wind tunnel tests,” Journal of Tongji University, vol. 36, no. 8, pp. 1034–1039, 2008. View at Google Scholar · View at Scopus
  10. China association for engineering construction standardization, “Technical specification for steel structure of light-weight buildings with gabled frames,” CECS 102:2002, China Plan Press, Beijing, China, 2003. View at Google Scholar
  11. Metal Building Manufactures Association, Metal Building Systems Manual, Metal Building Manufactures Association Incorporated, Memphis, Tenn, USA, 2006.
  12. Architectural Institute of Japan, Recommendations for Loads on Buildings, Architectural Institute of Japan, Tokyo, Japan, 2004.
  13. Y. Tamura, S. Suganuma, H. Kikuchi, and K. Hibi, “Proper orthogonal decomposition of random wind pressure field,” Journal of Fluids and Structures, vol. 13, no. 7-8, pp. 1069–1095, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. M. M. Rocha, S. V. S. Cabral, and J. D. Riera, “A comparison of proper orthogonal decomposition and Monte Carlo simulation of wind pressure data,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 84, no. 3, pp. 329–344, 2000. View at Publisher · View at Google Scholar · View at Scopus